1 files changed, 17 insertions, 8 deletions
diff --git a/zumo/zumo.ino b/zumo/zumo.ino
index f59bd36..1a64381 100644
--- a/zumo/zumo.ino
+++ b/zumo/zumo.ino
@@ -2,33 +2,42 @@
 #include <Arduino.h>
 #include <Wire.h>
 
+#include "control.h"
 #include "protocol.h"
 #include "pid.h"
 
 dui_state_t g_dui_target_state = {
-	.steer = 1.0f,
-	.speed = 1.0f,
+	.steer = 0.0f,
+	.speed = 0.0f,
 	.current_sign = DUI_SIGN_NONE,
 	.speed_mod = 1.f,
 };
 dui_state_t g_dui_current_state = {
 	.steer = 0.f,
-	.speed = 1.f,
+	.speed = 0.f,
 	.current_sign = DUI_SIGN_NONE,
 	.speed_mod = 1.f,
 };
 
 void setup() {
+	pinMode(DUI_PINOUT_NICLA_TX, OUTPUT);
+	pinMode(DUI_PINOUT_NICLA_RX, INPUT_PULLUP);
+	Serial.begin(115200);
 }
 
 void loop() {
-	unsigned char cmd = 0x00;
-	while ((cmd = uart_read()))
-		handle_cmd(cmd, &g_dui_target_state);
+	static unsigned char cmd_old = 0x00;
+	for (unsigned int i = 0; i < 1000; i++) {
+		digitalWrite(DUI_PINOUT_NICLA_TX, LOW);
+		unsigned char cmd = uart_read();
+		if (cmd == 0x00) continue;
+		if (cmd == cmd_old) handle_cmd(cmd, &g_dui_target_state);
+		cmd_old = cmd;
+	}
+	digitalWrite(DUI_PINOUT_NICLA_TX, HIGH);
 
 	apply_pid(&g_dui_target_state, &g_dui_current_state);
+	g_dui_current_state.current_sign = g_dui_target_state.current_sign;
 
 	apply_state(&g_dui_current_state);
-
-	delay(10);
 }