1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
|
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file : main.c
* @brief : Main program body
******************************************************************************
* @attention
*
* Copyright (c) 2023 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "main.h"
/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
/* USER CODE END Includes */
/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN PTD */
/* USER CODE END PTD */
/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD */
/* USER CODE END PD */
/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN PM */
/* USER CODE END PM */
/* Private variables ---------------------------------------------------------*/
SPI_HandleTypeDef hspi1;
TIM_HandleTypeDef htim3;
/* USER CODE BEGIN PV */
/* USER CODE END PV */
/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
static void MX_GPIO_Init(void);
static void MX_SPI1_Init(void);
static void MX_TIM3_Init(void);
/* USER CODE BEGIN PFP */
/* USER CODE END PFP */
/* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */
/* USER CODE END 0 */
/**
* @brief The application entry point.
* @retval int
*/
int main(void)
{
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
/* MCU Configuration--------------------------------------------------------*/
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
HAL_Init();
/* USER CODE BEGIN Init */
/* USER CODE END Init */
/* Configure the system clock */
SystemClock_Config();
/* USER CODE BEGIN SysInit */
/* USER CODE END SysInit */
/* Initialize all configured peripherals */
MX_GPIO_Init();
MX_SPI1_Init();
MX_TIM3_Init();
/* USER CODE BEGIN 2 */
// correct byte for led control
uint16_t pos_x = 310; //0b0000 0001 0011 0110
uint16_t pos_y = 210;
uint8_t left = 0;
uint8_t right = 0;
uint8_t up = 0;
uint8_t down = 0;
uint8_t tileMap[30][40] =
{
{1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 },
{1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 },
{1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 },
{1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 },
{1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 },
{1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
{1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
{1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
{1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
{1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
{1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
{1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
{1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
{1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
{1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
{1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
{1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
{1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
{1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
{1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
{1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
{1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
{1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
{1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
{1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 },
{1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 },
{1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 },
{1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 },
{1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 },
{1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 }
};
int pos_x_max = 410;
int pos_y_max = 310;
int pos_x_min = 210;
int pos_y_min = 110;
uint8_t pos_x_bit[2];
uint8_t pos_y_bit[2];
uint8_t data_send[3];
uint8_t led1Uit = 0b00100001 ;
uint8_t led2Uit = 0x9D ;
int tileX;
int tileY;
// int to pointer
// uint8_t * ledTest1 = &led1Aan;
// uint8_t * ledTest2 = &led2Aan;
uint8_t * ledTest3 = &led1Uit;
uint8_t * ledTest4 = &led2Uit;
/* USER CODE END 2 */
/* Infinite loop */
/* USER CODE BEGIN WHILE */
while (1)
{
// pos_x_bit[0] = 0b00000001;
// pos_x_bit[1] = 0b00110110;
pos_x_bit[1] = pos_x & 0xff;
pos_x_bit[0] = (pos_x >> 8);
pos_y_bit[1] = pos_y & 0xff;
pos_y_bit[0] = (pos_y >> 8);
tileX = pos_x / 20;
tileY = pos_y / 16;
if(HAL_GPIO_ReadPin(GPIOB, GPIO_PIN_4) == 1)
{
left++;
}
else
{
left = 0;
}
if(HAL_GPIO_ReadPin(GPIOB, GPIO_PIN_5) == 1)
{
right++;
}
else
{
right = 0;
}
if(HAL_GPIO_ReadPin(GPIOB, GPIO_PIN_6) == 1)
{
up++;
}
else
{
up = 0;
}
if(HAL_GPIO_ReadPin(GPIOB, GPIO_PIN_8) == 1)
{
down++;
}
else
{
down = 0;
}
// if(pos_x % 8 == 0 && pos_y % 8 == 0 && tileMap[tileY][tileX] == 1)
// {
// }
// else
// {
if(left > 10)
{
if(tileMap[tileY][tileX] == 1)
{
left = 0;
}
else
{
pos_x--;
}
left = 0;
}
if(right > 10)
{
if(tileMap[tileY][tileX+1] == 1)
{
right = 0;
}
else
{
pos_x++;
}
right = 0;
}
if(up > 10)
{
if(tileMap[tileY+1][tileX] == 1)
{
up = 0;
}
else
{
pos_y++;
}
up = 0;
}
if(down > 10)
{
if( tileMap[tileY][tileX] == 1)
{
down = 0;
}
else
{
pos_y--;
}
down = 0;
}
// }
data_send[0] = 0b00000000;
data_send[1] = pos_y_bit[0] ;
data_send[2] = pos_y_bit[1];
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_9, GPIO_PIN_RESET);
HAL_SPI_Transmit(&hspi1, data_send, 3, HAL_MAX_DELAY); //2*8 bit
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_9, GPIO_PIN_SET);
data_send[0] = 0b01000000;
data_send[1] = pos_x_bit[0] ;
data_send[2] = pos_x_bit[1];
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_9, GPIO_PIN_RESET);
HAL_SPI_Transmit(&hspi1, data_send, 3, HAL_MAX_DELAY); //2*8 bit
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_9, GPIO_PIN_SET);
/* USER CODE END WHILE */
/* USER CODE BEGIN 3 */
}
/* USER CODE END 3 */
}
/**
* @brief System Clock Configuration
* @retval None
*/
void SystemClock_Config(void)
{
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
/** Initializes the RCC Oscillators according to the specified parameters
* in the RCC_OscInitTypeDef structure.
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
{
Error_Handler();
}
/** Initializes the CPU, AHB and APB buses clocks
*/
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|RCC_CLOCKTYPE_PCLK1;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI;
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK)
{
Error_Handler();
}
}
/**
* @brief SPI1 Initialization Function
* @param None
* @retval None
*/
static void MX_SPI1_Init(void)
{
/* USER CODE BEGIN SPI1_Init 0 */
/* USER CODE END SPI1_Init 0 */
/* USER CODE BEGIN SPI1_Init 1 */
/* USER CODE END SPI1_Init 1 */
/* SPI1 parameter configuration*/
hspi1.Instance = SPI1;
hspi1.Init.Mode = SPI_MODE_MASTER;
hspi1.Init.Direction = SPI_DIRECTION_1LINE;
hspi1.Init.DataSize = SPI_DATASIZE_8BIT;
hspi1.Init.CLKPolarity = SPI_POLARITY_LOW;
hspi1.Init.CLKPhase = SPI_PHASE_1EDGE;
hspi1.Init.NSS = SPI_NSS_SOFT;
hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_16;
hspi1.Init.FirstBit = SPI_FIRSTBIT_MSB;
hspi1.Init.TIMode = SPI_TIMODE_DISABLE;
hspi1.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
hspi1.Init.CRCPolynomial = 7;
hspi1.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
hspi1.Init.NSSPMode = SPI_NSS_PULSE_DISABLE;
if (HAL_SPI_Init(&hspi1) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN SPI1_Init 2 */
/* USER CODE END SPI1_Init 2 */
}
/**
* @brief TIM3 Initialization Function
* @param None
* @retval None
*/
static void MX_TIM3_Init(void)
{
/* USER CODE BEGIN TIM3_Init 0 */
/* USER CODE END TIM3_Init 0 */
TIM_ClockConfigTypeDef sClockSourceConfig = {0};
TIM_MasterConfigTypeDef sMasterConfig = {0};
/* USER CODE BEGIN TIM3_Init 1 */
/* USER CODE END TIM3_Init 1 */
htim3.Instance = TIM3;
htim3.Init.Prescaler = 7999;
htim3.Init.CounterMode = TIM_COUNTERMODE_UP;
htim3.Init.Period = 65535;
htim3.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
htim3.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
if (HAL_TIM_Base_Init(&htim3) != HAL_OK)
{
Error_Handler();
}
sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
if (HAL_TIM_ConfigClockSource(&htim3, &sClockSourceConfig) != HAL_OK)
{
Error_Handler();
}
sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
if (HAL_TIMEx_MasterConfigSynchronization(&htim3, &sMasterConfig) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN TIM3_Init 2 */
/* USER CODE END TIM3_Init 2 */
}
/**
* @brief GPIO Initialization Function
* @param None
* @retval None
*/
static void MX_GPIO_Init(void)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
/* GPIO Ports Clock Enable */
__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_9, GPIO_PIN_SET);
/*Configure GPIO pin : PA9 */
GPIO_InitStruct.Pin = GPIO_PIN_9;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/*Configure GPIO pins : PB4 PB5 PB6 PB8 */
GPIO_InitStruct.Pin = GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_8;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
}
/* USER CODE BEGIN 4 */
/* USER CODE END 4 */
/**
* @brief This function is executed in case of error occurrence.
* @retval None
*/
void Error_Handler(void)
{
/* USER CODE BEGIN Error_Handler_Debug */
/* User can add his own implementation to report the HAL error return state */
__disable_irq();
while (1)
{
}
/* USER CODE END Error_Handler_Debug */
}
#ifdef USE_FULL_ASSERT
/**
* @brief Reports the name of the source file and the source line number
* where the assert_param error has occurred.
* @param file: pointer to the source file name
* @param line: assert_param error line source number
* @retval None
*/
void assert_failed(uint8_t *file, uint32_t line)
{
/* USER CODE BEGIN 6 */
/* User can add his own implementation to report the file name and line number,
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
/* USER CODE END 6 */
}
#endif /* USE_FULL_ASSERT */
|