#include #include #include #include "setup.h" #include "sensor.h" #include "backlog.h" #define SI7021_ADDRESS ((uint16_t)(0x40) << 1) #define SI7021_REG_TEMP ((uint8_t)(0xE3)) #define SI7021_REG_HUM ((uint8_t)(0xE5)) #define BMP280_ADDRESS ((uint16_t)(0x76) << 1) uint8_t ws_sensor_temperature() { uint8_t buf[12]; int16_t val; float temp_c; buf[0] = SI7021_REG_TEMP; HAL_I2C_Master_Transmit(&hi2c1, SI7021_ADDRESS, buf, 1, HAL_MAX_DELAY); HAL_I2C_Master_Receive(&hi2c1, SI7021_ADDRESS, buf, 2, HAL_MAX_DELAY); val = ((int16_t)buf[0]<< 8 ) | (buf[1]); temp_c= ((175.72*val)/65536) - 46.85; return (uint8_t) temp_c; //TODO: convert with range -> util.h } uint8_t ws_sensor_humidity() { uint8_t buf[12]; int16_t val; buf[0] = SI7021_REG_HUM; HAL_I2C_Master_Transmit(&hi2c1, SI7021_ADDRESS, buf, 1, HAL_MAX_DELAY); HAL_I2C_Master_Receive(&hi2c1, SI7021_ADDRESS, buf, 2, HAL_MAX_DELAY); val = ((int16_t)buf[0]<< 8 ) | (buf[1]); float humidity = (( 125 * (float) val ) / 65536 ) - 6; return (uint8_t) humidity; //TODO: convert with range -> util.h } uint8_t ws_sensor_atmospheric_pressure() { uint8_t buf[12]; uint8_t buffer[12]; int16_t val; buf[0]= 0xF4; buf[1]= 0x07; buffer[0] = 0xF7; HAL_I2C_Master_Transmit(&hi2c1, BMP280_ADDRESS, buf , 2, HAL_MAX_DELAY); HAL_I2C_Mem_Read(&hi2c1, BMP280_ADDRESS, 0xF7, 1, buffer, 2, 100 ); val = (buffer[0] << 8 | buffer[1]); return (uint8_t) val; // TODO: convert with range } void ws_sensor_read() { ws_s_backlog_record record = { .sens_temperature = ws_sensor_temperature(), .sens_atm_pressure = ws_sensor_atmospheric_pressure(), .sens_humidity = ws_sensor_humidity() }; ws_backlog_add_record(record); // < DEBUG PROTOCOL PARSING CODE > // ws_s_protocol_req_parser_state* parser = ws_protocol_req_parser_alloc(); // const char* request = "last-records 5\n"; // ws_protocol_parse_req_bytes(parser, (char*) request, strlen(request)); // ws_protocol_req_parser_free(parser); } void ws_sensor_read_task() { while (1) { ws_sensor_read(); HAL_GPIO_TogglePin(GPIOA, GPIO_PIN_5); vTaskDelay(portTICK_PERIOD_MS * 1000 * 1); } }