aboutsummaryrefslogtreecommitdiff
path: root/stm32f091/esp/Src/main.c
diff options
context:
space:
mode:
Diffstat (limited to 'stm32f091/esp/Src/main.c')
-rw-r--r--stm32f091/esp/Src/main.c510
1 files changed, 0 insertions, 510 deletions
diff --git a/stm32f091/esp/Src/main.c b/stm32f091/esp/Src/main.c
deleted file mode 100644
index 52ca7ee..0000000
--- a/stm32f091/esp/Src/main.c
+++ /dev/null
@@ -1,510 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
- ******************************************************************************
- * @file : main.c
- * @brief : Main program body
- ******************************************************************************
- * @attention
- *
- * Copyright (c) 2022 STMicroelectronics.
- * All rights reserved.
- *
- * This software is licensed under terms that can be found in the LICENSE file
- * in the root directory of this software component.
- * If no LICENSE file comes with this software, it is provided AS-IS.
- *
- ******************************************************************************
- */
-/* USER CODE END Header */
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-#include "string.h"
-#include "stdio.h"
-#include "stdlib.h"
-
-/* Private includes ----------------------------------------------------------*/
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-/* Private typedef -----------------------------------------------------------*/
-/* USER CODE BEGIN PTD */
-
-/* USER CODE END PTD */
-
-/* Private define ------------------------------------------------------------*/
-/* USER CODE BEGIN PD */
-/* USER CODE END PD */
-
-/* Private macro -------------------------------------------------------------*/
-/* USER CODE BEGIN PM */
-
-/* USER CODE END PM */
-
-/* Private variables ---------------------------------------------------------*/
-UART_HandleTypeDef huart1;
-UART_HandleTypeDef huart2;
-
-/* USER CODE BEGIN PV */
-
-/* USER CODE END PV */
-
-/* Private function prototypes -----------------------------------------------*/
-void SystemClock_Config(void);
-static void MX_GPIO_Init(void);
-static void MX_USART1_UART_Init(void);
-static void MX_USART2_UART_Init(void);
-/* USER CODE BEGIN PFP */
-
-/* USER CODE END PFP */
-
-/* Private user code ---------------------------------------------------------*/
-/* USER CODE BEGIN 0 */
-
-void ATsendCommand(uint8_t* data){
- char dataChar[20];
- uint8_t Tx_send[]="AT+CIPSEND=0,";
-
- itoa(strlen((char*)data),dataChar,10);
- strcat((char*)Tx_send,dataChar);
- strcat((char*)Tx_send,"\r\n");
- HAL_UART_Transmit(&huart1, Tx_send, strlen((char*)Tx_send),1000);
- HAL_Delay(2000);
- HAL_UART_Transmit(&huart1, data, strlen((char*)data),1000);
- HAL_Delay(1000);
- HAL_UART_Transmit(&huart2, data, strlen((char*)data),1000);
- HAL_Delay(5000);
-}
-int checkOK(uint8_t *receiveData,int length){
- char *ret="";
- char *ret1="";
- HAL_UART_Transmit(&huart2, receiveData,length,1000);
- ret = strstr((char*)receiveData,"OK");
- // ret = strstr((char*)receiveData,"change");
- // memset(receiveData,0,30);
- if((ret[0]='O') && (ret[1]=='K')){
- //HAL_UART_Transmit(&huart2, (uint8_t*)ret, sizeof(ret), 100);
- return 1;
-
- }
-// else if((ret1[0]='c') && (ret1[1]=='h')){
-// //HAL_UART_Transmit(&huart2, (uint8_t*)ret, sizeof(ret), 100);
-// return 1;
-//
-// }
- else{
- return 0;
- }
-
-}
-int receivingMsg(uint8_t *receiveData,int length){
- char *ret="";
- HAL_UART_Transmit(&huart2, receiveData,length,1000);
- ret = strstr((char*)receiveData,"+IPD");
- // memset(receiveData,0,30);
- if((ret[0]='+') && (ret[1]=='I')){
- //HAL_UART_Transmit(&huart2, (uint8_t*)ret, sizeof(ret), 100);
- return 1;
-
- }
- else{
- return 0;
- }
-
-}
-int unlink(uint8_t *receiveData,int length){
- char *ret="";
- HAL_UART_Transmit(&huart2, receiveData,length,1000);
- ret = strstr((char*)receiveData,"UNLINK");
- // memset(receiveData,0,30);
- if((ret[0]='U') && (ret[1]=='N')){
- //HAL_UART_Transmit(&huart2, (uint8_t*)ret, sizeof(ret), 100);
- return 1;
-
- }
- else{
- return 0;
- }
-
-}
-
-void StartEsp(){
-
- uint8_t Tx_AT[]="AT\r\n";
- uint8_t Rx_buffer[10]={0};
- for(int i=0;i<3;i++){
- // HAL_UART_Transmit(&huart2, hier,sizeof(hier),100);
- HAL_UART_Transmit_IT(&huart1, Tx_AT,strlen((char*)Tx_AT));
- HAL_UART_Receive_IT(&huart1, Rx_buffer, 10);
-
-
- HAL_UART_Transmit(&huart2, Rx_buffer,10,100);
- HAL_Delay(5000);
- //memset(Rx_buffer,0,sizeof(Rx_buffer));
- }
-
-}
-void disconnect(){
- int ret;
- uint8_t Tx_disconnect[]="AT+CWQAP\r\n";uint8_t buffer[17]={0};
- while(ret!=1){
-
- HAL_UART_Transmit_IT(&huart1, Tx_disconnect,strlen((char*)Tx_disconnect));
- HAL_UART_Receive_IT(&huart1, buffer, 17);
- HAL_Delay(2000);
-
- if(checkOK(buffer,17)==1){
- ret=1;
- }
-
- }
-
- HAL_Delay(5000);
-}
-void mode(){
- int ret;
- uint8_t buffer1[20]={0}; uint8_t Tx_mode[]="AT+CWMODE=1\r\n";
-
- while(ret!=1){
-
- HAL_UART_Transmit_IT(&huart1, Tx_mode,strlen((char*)Tx_mode));
- HAL_UART_Receive_IT(&huart1, buffer1, 20);
- HAL_Delay(1000);
-
- if(checkOK(buffer1,20)==1){
- ret=1;
-
- }
-
- }
-
- HAL_Delay(1000);
-}
-void connect(){
- uint8_t Tx_network[]="AT+CWJAP=\"Test\",\"12345678\"\r\n";
-
-
- HAL_UART_Transmit(&huart1, Tx_network,strlen((char*)Tx_network),1000);
- HAL_Delay(10000);
-// HAL_UART_Transmit(&huart1, Tx_network,sizeof(Tx_network),1000);
-// HAL_Delay(10000);
-
-
-
-
-
-}
-void serveraan(){
- int ret;
- uint8_t buffer1[30]={0}; uint8_t Tx_server[]="AT+CIPSERVER=1,80\r\n";
-
- while(ret!=1){
-
- HAL_UART_Transmit_IT(&huart1, Tx_server,strlen((char*)Tx_server));
- HAL_UART_Receive_IT(&huart1, buffer1, 30);
- HAL_Delay(2000);
-
- if(checkOK(buffer1,30)==1){
- ret=1;
-
- }
-
- }
-
- HAL_Delay(1000);
-}
-void serveruit(){
- int ret;
- uint8_t buffer1[27]={0}; uint8_t Tx_server[]="AT+CIPSERVER=0\r\n";
-//
-// while(ret!=1){
-
- HAL_UART_Transmit_IT(&huart1, Tx_server,strlen((char*)Tx_server));
-// HAL_UART_Receive_IT(&huart1, buffer1, 27);
- HAL_Delay(3000);
-
-// if(unlink(buffer1,27)==1){
-// ret=1;
-//
-// }
-//
-// }
-
- HAL_Delay(1000);
-}
-void mux(){
- int ret;
- uint8_t buffer2[20]={0}; uint8_t Tx_mux[]="AT+CIPMUX=1\r\n";
-
- while(ret!=1){
-
- HAL_UART_Transmit_IT(&huart1, Tx_mux,strlen((char*)Tx_mux));
- HAL_UART_Receive_IT(&huart1, buffer2, 20);
- HAL_Delay(2000);
-
- if(checkOK(buffer2,20)==1){
- ret=1;
-
- }
-
- }
-
- HAL_Delay(5000);
-}
-void close(){
-
- uint8_t Tx_close[]="AT+CIPCLOSE=0\r\n";
-
-
- HAL_UART_Transmit_IT(&huart1, Tx_close,strlen((char*)Tx_close));
-
- HAL_Delay(3000);
-
-}
-
-int main(void)
-{
- /* USER CODE BEGIN 1 */
-
- /* USER CODE END 1 */
-
- /* MCU Configuration--------------------------------------------------------*/
-
- /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
- HAL_Init();
-
- /* USER CODE BEGIN Init */
-
- /* USER CODE END Init */
-
- /* Configure the system clock */
- SystemClock_Config();
-
- /* USER CODE BEGIN SysInit */
-
- /* USER CODE END SysInit */
-
- /* Initialize all configured peripherals */
- MX_GPIO_Init();
- MX_USART1_UART_Init();
- MX_USART2_UART_Init();
- /* USER CODE BEGIN 2 */
-
- /* USER CODE END 2 */
-
- /* Infinite loop */
- /* USER CODE BEGIN WHILE */
-uint8_t ok[]= "ok\r\n";
-uint8_t hier[]= "hier\r\n";
-//disconnect();//connect();//
-
-StartEsp();
-HAL_UART_Transmit(&huart2, hier,sizeof(hier),1000);
-close();
-HAL_UART_Transmit(&huart2, hier,sizeof(hier),1000);
-serveruit();
-HAL_UART_Transmit(&huart2, hier,sizeof(hier),1000);
-mux();
-HAL_UART_Transmit(&huart2, hier,sizeof(hier),1000);
-mode();
-HAL_UART_Transmit(&huart2, hier,sizeof(hier),1000);
-
-serveraan();
-HAL_UART_Transmit(&huart2, ok,sizeof(ok),1000);
-uint8_t receive[24]={0};
-uint8_t sendToQTData[]="gelukt";
-uint8_t test[]="test";
-int ret;
-//ATsendCommand(sendToQTData);
- while (1)
- {
-
- if(receive[0]=='\0')
- {
- HAL_UART_Receive_IT(&huart1, receive, 24);
- }
- else
- {
- HAL_UART_Transmit(&huart2, test,strlen((char*)test),1000);
- HAL_Delay(5000);
-
-// if(receivingMsg(receive, 24)==1)
-// {
-// ret=1;
- ATsendCommand(sendToQTData);
- close();
- memset(receive,0,24);
- //}
- }
-
-
-
- }
-
-
-
-
-
-}
-
-/**
- * @brief System Clock Configuration
- * @retval None
- */
-void SystemClock_Config(void)
-{
- RCC_OscInitTypeDef RCC_OscInitStruct = {0};
- RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
- RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
-
- /** Initializes the RCC Oscillators according to the specified parameters
- * in the RCC_OscInitTypeDef structure.
- */
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
- RCC_OscInitStruct.HSIState = RCC_HSI_ON;
- RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
- {
- Error_Handler();
- }
-
- /** Initializes the CPU, AHB and APB buses clocks
- */
- RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
- |RCC_CLOCKTYPE_PCLK1;
- RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI;
- RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
- RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
-
- if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK)
- {
- Error_Handler();
- }
- PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART1|RCC_PERIPHCLK_USART2;
- PeriphClkInit.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK1;
- PeriphClkInit.Usart2ClockSelection = RCC_USART2CLKSOURCE_PCLK1;
- if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
- {
- Error_Handler();
- }
-}
-
-/**
- * @brief USART1 Initialization Function
- * @param None
- * @retval None
- */
-static void MX_USART1_UART_Init(void)
-{
-
- /* USER CODE BEGIN USART1_Init 0 */
-
- /* USER CODE END USART1_Init 0 */
-
- /* USER CODE BEGIN USART1_Init 1 */
-
- /* USER CODE END USART1_Init 1 */
- huart1.Instance = USART1;
- huart1.Init.BaudRate = 115200;
- huart1.Init.WordLength = UART_WORDLENGTH_8B;
- huart1.Init.StopBits = UART_STOPBITS_1;
- huart1.Init.Parity = UART_PARITY_NONE;
- huart1.Init.Mode = UART_MODE_TX_RX;
- huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
- huart1.Init.OverSampling = UART_OVERSAMPLING_16;
- huart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
- huart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
- if (HAL_UART_Init(&huart1) != HAL_OK)
- {
- Error_Handler();
- }
- /* USER CODE BEGIN USART1_Init 2 */
-
- /* USER CODE END USART1_Init 2 */
-
-}
-
-/**
- * @brief USART2 Initialization Function
- * @param None
- * @retval None
- */
-static void MX_USART2_UART_Init(void)
-{
-
- /* USER CODE BEGIN USART2_Init 0 */
-
- /* USER CODE END USART2_Init 0 */
-
- /* USER CODE BEGIN USART2_Init 1 */
-
- /* USER CODE END USART2_Init 1 */
- huart2.Instance = USART2;
- huart2.Init.BaudRate = 115200;
- huart2.Init.WordLength = UART_WORDLENGTH_8B;
- huart2.Init.StopBits = UART_STOPBITS_1;
- huart2.Init.Parity = UART_PARITY_NONE;
- huart2.Init.Mode = UART_MODE_TX_RX;
- huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
- huart2.Init.OverSampling = UART_OVERSAMPLING_16;
- huart2.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
- huart2.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
- if (HAL_UART_Init(&huart2) != HAL_OK)
- {
- Error_Handler();
- }
- /* USER CODE BEGIN USART2_Init 2 */
-
- /* USER CODE END USART2_Init 2 */
-
-}
-
-/**
- * @brief GPIO Initialization Function
- * @param None
- * @retval None
- */
-static void MX_GPIO_Init(void)
-{
-
- /* GPIO Ports Clock Enable */
- __HAL_RCC_GPIOA_CLK_ENABLE();
-
-}
-
-/* USER CODE BEGIN 4 */
-
-/* USER CODE END 4 */
-
-/**
- * @brief This function is executed in case of error occurrence.
- * @retval None
- */
-void Error_Handler(void)
-{
- /* USER CODE BEGIN Error_Handler_Debug */
- /* User can add his own implementation to report the HAL error return state */
- __disable_irq();
- while (1)
- {
- }
- /* USER CODE END Error_Handler_Debug */
-}
-
-#ifdef USE_FULL_ASSERT
-/**
- * @brief Reports the name of the source file and the source line number
- * where the assert_param error has occurred.
- * @param file: pointer to the source file name
- * @param line: assert_param error line source number
- * @retval None
- */
-void assert_failed(uint8_t *file, uint32_t line)
-{
- /* USER CODE BEGIN 6 */
- /* User can add his own implementation to report the file name and line number,
- ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
- /* USER CODE END 6 */
-}
-#endif /* USE_FULL_ASSERT */