2 files changed, 12 insertions, 62 deletions

diff --git a/puzzle/smoketest/CMakeLists.txt b/puzzle/smoketest/CMakeLists.txt
index 08e828b..b71825f 100644
--- a/puzzle/smoketest/CMakeLists.txt
+++ b/puzzle/smoketest/CMakeLists.txt
@@ -10,8 +10,8 @@ add_compile_definitions(DEBUG)
 
 # arduino
 set(CMAKE_TOOLCHAIN_FILE ${CMAKE_SOURCE_DIR}/lib/Arduino-CMake-Toolchain/Arduino-toolchain.cmake)
-set(ARDUINO_BOARD "Arduino Mega or Mega 2560 [avr.mega]")
-#set(ARDUINO_BOARD "Arduino Uno [avr.uno]")
+# set(ARDUINO_BOARD "Arduino Mega or Mega 2560 [avr.mega]")
+set(ARDUINO_BOARD "Arduino Uno [avr.uno]")
 
 # freertos
 add_library(freertos_config INTERFACE)
@@ -19,7 +19,7 @@ target_include_directories(freertos_config SYSTEM INTERFACE .)
 set(FREERTOS_PORT GCC_ATMEGA)
 set(FREERTOS_HEAP 4)
 
-project(pb_mod_vault C CXX)
+project(pb_mod_smoketest C CXX)
 
 add_subdirectory(lib/pbdrv)
 add_subdirectory(lib/FreeRTOS-Kernel)
@@ -35,7 +35,6 @@ target_link_libraries(main PUBLIC
 target_link_arduino_libraries(main PUBLIC
 	core
 	Wire
-	TM1637
 	)
 
 target_enable_arduino_upload(main)
diff --git a/puzzle/smoketest/main.cpp b/puzzle/smoketest/main.cpp
index b125254..dc15e5f 100644
--- a/puzzle/smoketest/main.cpp
+++ b/puzzle/smoketest/main.cpp
@@ -3,75 +3,26 @@
 #include "lib/pbdrv/pb-mod.h"
 
 #define EXTERNAL_LED_PIN 13
-#define BUTTON_PIN 10  // Define the pin where the external button is connected
+#define BUTTON_PIN 10 // Define the pin where the external button is connected
 
-// Puzzle state
-pb_global_state_t puzzleState = PB_GS_NOINIT;
-
-unsigned long lastDebounceTime = 0;  // the last time the output pin was toggled
-unsigned long debounceDelay = 50;    // the debounce time; increase if the output flickers
-int lastButtonState = HIGH;          // the previous reading from the input pin
-int buttonState = HIGH;              // the current state of the button
+pb_global_state_t state = PB_GS_NOINIT;
 
 void setup() {
-  Serial.begin(115200);
   pinMode(EXTERNAL_LED_PIN, OUTPUT);
   pinMode(BUTTON_PIN, INPUT_PULLUP);
-  digitalWrite(EXTERNAL_LED_PIN, LOW);  // Ensure the external LED is off initially
-
-  Serial.println("System initialized.");
-}
-
-void led_blink(int time){
-  digitalWrite(EXTERNAL_LED_PIN, HIGH);
-  delay(time);
-  digitalWrite(EXTERNAL_LED_PIN, LOW);
-  delay(time);
 }
 
 pb_global_state_t pb_hook_mod_state_read() {
-  return puzzleState;
-}
-
-void pb_hook_mod_state_write(pb_global_state_t state) {
-  puzzleState = state;
+  return state;
 }
 
-void pb_hook_ev_main_state_update(pb_global_state_t state){
-	Serial.println("WE IN BOISS");
-}
-
-void checkButtonPress() {
-  int reading = digitalRead(BUTTON_PIN); // read the current state of the button
-
-  if (reading != lastButtonState) {
-	Serial.println("Button pressed, changing state to SOLVED.");
-	pb_hook_mod_state_write(PB_GS_SOLVED);
-    lastDebounceTime = millis();  // reset debouncing timer
-  }
-
-  if ((millis() - lastDebounceTime) > debounceDelay) {
-    lastButtonState = reading;  // update the last state for next comparison
-  }
+void pb_hook_mod_state_write(pb_global_state_t _state) {
+  state = _state;
 }
 
 void loop() {
-  switch(puzzleState) {
-    case PB_GS_PLAYING:
-      digitalWrite(EXTERNAL_LED_PIN, LOW);  // LED is off in PLAYING state
-	  checkButtonPress();
-      break;
-    case PB_GS_SOLVED:
-      Serial.println("STATE = PB_GS_SOLVED");
-      digitalWrite(EXTERNAL_LED_PIN, HIGH);  // LED is on in SOLVED state
-      break;
-    case PB_GS_NOINIT:
-      Serial.println("STATE = PB_GS_NOINIT");
-      led_blink(100);  // Blink LED rapidly in NOINIT state
-      break;
-    case PB_GS_IDLE:
-      Serial.println("STATE = PB_GS_IDLE");
-      led_blink(500);  // Blink LED slowly in IDLE state
-      break;
-  }
+	digitalWrite(EXTERNAL_LED_PIN, state == PB_GS_PLAYING);
+
+	if (!digitalRead(BUTTON_PIN)) return;
+	state = PB_GS_SOLVED;
 }