diff options
Diffstat (limited to 'puzzle/vault')
| -rw-r--r-- | puzzle/vault/CMakeLists.txt | 49 | ||||
| -rw-r--r-- | puzzle/vault/FreeRTOSConfig.h | 52 | ||||
| -rw-r--r-- | puzzle/vault/arduino-vaultpuzzle/arduino-vaultpuzzle.ino | 150 | ||||
| -rw-r--r-- | puzzle/vault/console-vaultpuzzle/vault.cpp | 130 | ||||
| l--------- | puzzle/vault/lib | 1 | ||||
| -rw-r--r-- | puzzle/vault/main.cpp | 165 | ||||
| -rw-r--r-- | puzzle/vault/makefile | 20 | ||||
| -rw-r--r-- | puzzle/vault/mod.c | 6 |
8 files changed, 293 insertions, 280 deletions
diff --git a/puzzle/vault/CMakeLists.txt b/puzzle/vault/CMakeLists.txt new file mode 100644 index 0000000..b0f05f2 --- /dev/null +++ b/puzzle/vault/CMakeLists.txt @@ -0,0 +1,49 @@ +cmake_minimum_required(VERSION 3.29) + +set(CMAKE_C_STANDARD 11) +set(CMAKE_CXX_STANDARD 17) +set(CMAKE_EXPORT_COMPILE_COMMANDS 1) + +# enable debug features +set(CMAKE_BUILD_TYPE Debug) +add_compile_definitions(DEBUG) +# add_compile_options(-O0) # no optimizations + +# arduino +set(CMAKE_TOOLCHAIN_FILE ${CMAKE_SOURCE_DIR}/lib/Arduino-CMake-Toolchain/Arduino-toolchain.cmake) +# set(ARDUINO_BOARD "Arduino Uno [avr.uno]") +set(ARDUINO_BOARD "Arduino Mega or Mega 2560 [avr.mega]") + +# freertos +add_library(freertos_config INTERFACE) +target_include_directories(freertos_config SYSTEM INTERFACE .) +# set(FREERTOS_PORT GCC_ATMEGA) # Arduino Uno +set(FREERTOS_PORT GCC_ATMEGA) # Arduino Uno +set(FREERTOS_HEAP 4) + +# used for testing +# set(ARDUINO_BOARD "Raspberry Pi Pico W [rp2040.rpipicow]") +# add_compile_definitions(USE_TINYUSB) +# include_directories(/home/loek/.arduino15/packages/rp2040/hardware/rp2040/3.9.2/libraries/Adafruit_TinyUSB_Arduino/src/arduino) + +project(pb_mod_dummy C CXX) + +add_subdirectory(lib/pbdrv) +add_subdirectory(lib/FreeRTOS-Kernel) + +add_executable(main + main.cpp + mod.c + ) + +target_link_libraries(main PUBLIC + pbdrv-mod + ) +target_link_arduino_libraries(main PUBLIC + core + Wire + TM1637 + ) + +target_enable_arduino_upload(main) + diff --git a/puzzle/vault/FreeRTOSConfig.h b/puzzle/vault/FreeRTOSConfig.h new file mode 100644 index 0000000..c0acc49 --- /dev/null +++ b/puzzle/vault/FreeRTOSConfig.h @@ -0,0 +1,52 @@ +#pragma once + +#define configUSE_PREEMPTION 1 +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configMAX_PRIORITIES 32 +#define configMINIMAL_STACK_SIZE ((configSTACK_DEPTH_TYPE) 192) +#define configUSE_16_BIT_TICKS 1 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_APPLICATION_TASK_TAG 0 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 8 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 1 +#define configSTACK_DEPTH_TYPE uint16_t +#define configSUPPORT_STATIC_ALLOCATION 0 +#define configSUPPORT_DYNAMIC_ALLOCATION 1 +// #define configTOTAL_HEAP_SIZE (1024) +#define configTOTAL_HEAP_SIZE (5 * 1024) +#define configCHECK_FOR_STACK_OVERFLOW 0 +#define configUSE_MALLOC_FAILED_HOOK 0 +#define configUSE_DAEMON_TASK_STARTUP_HOOK 0 +#define configGENERATE_RUN_TIME_STATS 0 +#define configUSE_TRACE_FACILITY 0 +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES - 1) +#define configTIMER_QUEUE_LENGTH 10 +#define configTIMER_TASK_STACK_DEPTH 92 + +#include <assert.h> +#define configASSERT(x) assert(x) + +#define INCLUDE_vTaskPrioritySet 1 +#define INCLUDE_uxTaskPriorityGet 1 +#define INCLUDE_vTaskDelete 1 +#define INCLUDE_vTaskSuspend 1 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 1 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 1 +#define INCLUDE_xTaskGetIdleTaskHandle 1 +#define INCLUDE_eTaskGetState 1 +#define INCLUDE_xTimerPendFunctionCall 1 +#define INCLUDE_xTaskAbortDelay 1 +#define INCLUDE_xTaskGetHandle 1 +#define INCLUDE_xTaskResumeFromISR 1 +#define INCLUDE_xQueueGetMutexHolder 1 + diff --git a/puzzle/vault/arduino-vaultpuzzle/arduino-vaultpuzzle.ino b/puzzle/vault/arduino-vaultpuzzle/arduino-vaultpuzzle.ino deleted file mode 100644 index 4dd8ac8..0000000 --- a/puzzle/vault/arduino-vaultpuzzle/arduino-vaultpuzzle.ino +++ /dev/null @@ -1,150 +0,0 @@ -#include <Wire.h> -#include <TM1637Display.h> - -// Definitions for GPIO numbers, change these according to your hardware setup -#define TOTAL_LEVELS 5 -#define TAG "VaultPuzzle" - -// Key Matrix Pin Configuration -#define ROWS 4 -#define COLS 3 - -// Module connection pins (Digital Pins for TM1637) -#define CLK 2 -#define DIO 3 - -// Pin to indicate puzzle solved state -#define SOLVED_PIN 53 - -// Initialize the TM1637 display -TM1637Display display(CLK, DIO); - -//TODO Update these pin numbers based on your Arduino setup -const int ROW_PINS[ROWS] = {7, 6, 5, 4}; -const int COL_PINS[COLS] = {10, 9, 8}; - -typedef enum { - STATE_UNINITIALIZED = 0x00, - STATE_RESET = 0x01, - STATE_PLAYING = 0x02, - STATE_SOLVED = 0x03, - STATE_ERROR = 0x04 -} PuzzleState; - -const char* validButtons[TOTAL_LEVELS] = {"A2", "B1", "D3", "C2", "C1"}; -PuzzleState puzzleState = STATE_UNINITIALIZED; -int currentLevel = 0; - -// Function prototypes -void display_code(int level); -void initialize_system(); -void check_button_press(); -void update_state_after_button_press(bool validPress); -void play_error_sound(); -void blink_display(); - -void setup() { - Serial.begin(115200); // Initialize default Serial for debug messages - pinMode(SOLVED_PIN, OUTPUT); // Initialize the solved indicator pin - digitalWrite(SOLVED_PIN, LOW); // Start with the solved pin LOW - - display.setBrightness(0x0f); // Set the brightness of the TM1637 display - initialize_system(); - Serial.println("GPIO and display initialized."); - - // Test to light up all segments - uint8_t allOn[] = {0xFF, 0xFF, 0xFF, 0xFF}; // All segments on - display.setSegments(allOn); - delay(2000); // Keep it on for 2 seconds before proceeding - - // Initialize the game - if (true) { // Simulating isVaultClosed - puzzleState = STATE_RESET; - currentLevel = 0; - display_code(currentLevel); - } else { - Serial.println("Vault door is open. Please close the door to start the puzzle."); - } -} - -void initialize_system() { - // Configure the rows as input with pull-up - for (int i = 0; i < ROWS; i++) { - pinMode(ROW_PINS[i], INPUT_PULLUP); - } - - // Configure the columns as output - for (int i = 0; i < COLS; i++) { - pinMode(COL_PINS[i], OUTPUT); - digitalWrite(COL_PINS[i], HIGH); - } -} - -void loop() { - while (puzzleState != STATE_SOLVED) { - check_button_press(); - delay(100); // Non-blocking delay - } - // When puzzle is solved, you might want to display a final message and set the solved pin high - if (puzzleState == STATE_SOLVED) { - digitalWrite(SOLVED_PIN, HIGH); // Set the solved pin high - display.showNumberDec(currentLevel, true); // Show final level or a special message - Serial.println("Final display shown. Puzzle complete."); - while (1) { delay(1000); } // Hold on the final display - } -} - -void display_code(int level) { - Serial.print("Displaying code for level "); Serial.println(level); - // Display the level on the TM1637 4-digit 7-segment display - display.showNumberDec(level, true); // True to show leading zeros - Serial.print("Code for level "); Serial.print(level); Serial.println(" displayed successfully."); -} - -void check_button_press() { - char keyPress[3] = {0}; - for (int col = 0; col < COLS; col++) { - digitalWrite(COL_PINS[col], LOW); // Activate column - for (int row = 0; row < ROWS; row++) { - if (digitalRead(ROW_PINS[row]) == LOW) { // Detect if any row is activated - delay(50); // Debounce delay - if (digitalRead(ROW_PINS[row]) == LOW) { // Confirm the button is still pressed - keyPress[0] = 'A' + row; - keyPress[1] = '1' + col; - keyPress[2] = '\0'; - Serial.print("Keypress detected: "); Serial.println(keyPress); - if (strcmp(keyPress, validButtons[currentLevel]) == 0) { - currentLevel++; - if (currentLevel >= TOTAL_LEVELS) { - puzzleState = STATE_SOLVED; - Serial.println("Puzzle solved!"); - display.showNumberDec(currentLevel + 1, true); // Display the final level - digitalWrite(SOLVED_PIN, HIGH); // Set the solved pin high - } else { - puzzleState = STATE_PLAYING; - display_code(currentLevel); - } - } else { - play_error_sound(); - blink_display(); - puzzleState = STATE_ERROR; - currentLevel = 0; - display_code(currentLevel); - } - while (digitalRead(ROW_PINS[row]) == LOW) {} // Wait for release - } - } - } - digitalWrite(COL_PINS[col], HIGH); // Deactivate column - } -} - -void play_error_sound() { - // Simulate error sound - connect a buzzer to play actual sound - Serial.println("Playing error sound."); -} - -void blink_display() { - // Simulate blinking the display - use LEDs or other methods to show visual feedback - Serial.println("7-segment display is blinking to indicate an error."); -} diff --git a/puzzle/vault/console-vaultpuzzle/vault.cpp b/puzzle/vault/console-vaultpuzzle/vault.cpp deleted file mode 100644 index 3566b3e..0000000 --- a/puzzle/vault/console-vaultpuzzle/vault.cpp +++ /dev/null @@ -1,130 +0,0 @@ -#include <iostream> -#include <string> -#include <array> - -// Definitions for puzzle requirements -constexpr int TOTAL_LEVELS = 5; - -// Enumeration for the states of the puzzle -enum PuzzleState { - STATE_UNINITIALIZED, - STATE_RESET, - STATE_PLAYING, - STATE_SOLVED, - STATE_ERROR -}; - -// This array maps each level to the correct button press -const std::array<std::string, TOTAL_LEVELS> validButtons = {"A3", "F1", "U4", "C2", "L1"}; - -PuzzleState puzzleState = STATE_UNINITIALIZED; -int currentLevel = 0; - -// Function prototypes -void displayCode(int level); -void sendI2CUpdate(PuzzleState state); - -// Simulate sending an I2C update -void sendI2CUpdate(PuzzleState state) { - std::cout << "Sending state " << state << " to main controller via I2C.\n"; -} - -// Simulate checking if the vault door is closed -bool isVaultClosed() { - return true; // Return true if the door sensor indicates closed -} - -// Function to display a code on the 7-segment display -void displayCode(int level) { - std::cout << "Displaying code for level " << level << " on the 7-segment display.\n"; -} - -// Function to initialize the puzzle -void initializePuzzle() { - if (isVaultClosed()) { - puzzleState = STATE_RESET; - currentLevel = 1; // Start at level 1 - std::cout << "Puzzle initialized. Starting at level " << currentLevel << ".\n"; - displayCode(currentLevel); // Show the first code - } else { - std::cout << "Vault door is open. Please close the door to start the puzzle.\n"; - } -} - -// Function to lock the vault -void lockVault() { - std::cout << "Vault locked.\n"; -} - -// Function to unlock the vault -void unlockVault() { - std::cout << "Vault unlocked!\n"; -} - -// Function to simulate the buzzer sound -void playErrorSound() { - std::cout << "Playing error sound.\n"; -} - -// Function to simulate blinking the 7-segment display -void blinkDisplay() { - std::cout << "7-segment display is blinking to indicate an error.\n"; -} - -// Validate the button press for the current level -bool isValidButtonPress(const std::string& button, int level) { - return button == validButtons[level - 1]; -} - -// Function to update the state of the puzzle based on the current level -void updateStateAfterButtonPress(bool validPress) { - if (validPress) { - if (currentLevel >= TOTAL_LEVELS) { - puzzleState = STATE_SOLVED; - unlockVault(); - } else { - puzzleState = STATE_PLAYING; - displayCode(currentLevel); - } - } else { - puzzleState = STATE_ERROR; - playErrorSound(); - blinkDisplay(); - lockVault(); - currentLevel = 1; // Reset to level 1 - displayCode(currentLevel); - } - sendI2CUpdate(puzzleState); // Notify main controller of the state change -} - -int main() { - initializePuzzle(); - - std::string buttonInput; - - while (puzzleState != STATE_SOLVED) { - std::cout << "Enter the button pressed for level " << currentLevel << " (format Xn, e.g., A3): "; - std::getline(std::cin, buttonInput); - - if (!buttonInput.empty() && isValidButtonPress(buttonInput, currentLevel)) { - currentLevel++; - if (currentLevel > TOTAL_LEVELS) { - puzzleState = STATE_SOLVED; - unlockVault(); - std::cout << "The puzzle is solved and the vault is open!\n"; - } else { - displayCode(currentLevel); - } - } else { - playErrorSound(); - blinkDisplay(); - lockVault(); - puzzleState = STATE_RESET; - currentLevel = 1; - displayCode(currentLevel); - } - sendI2CUpdate(puzzleState); - } - - return 0; -} diff --git a/puzzle/vault/lib b/puzzle/vault/lib new file mode 120000 index 0000000..58677dd --- /dev/null +++ b/puzzle/vault/lib @@ -0,0 +1 @@ +../../lib
\ No newline at end of file diff --git a/puzzle/vault/main.cpp b/puzzle/vault/main.cpp new file mode 100644 index 0000000..76e5f65 --- /dev/null +++ b/puzzle/vault/main.cpp @@ -0,0 +1,165 @@ +#include <Arduino.h> +#include <Wire.h> +#include <TM1637Display.h> + +#define TOTAL_LEVELS 5 +#define ROWS 4 +#define COLS 3 +#define CLK 2 +#define DIO 3 +#define SOLVED_PIN 53 +#define I2C_MODULE_ADDRESS 0x08 // Address of the puzzle module +#define HANDSHAKE_RECEIVED {0x70, 0x75, 0x7a, 0x62, 0x75, 0x73} // Magic command for the handshake +#define HANDSHAKE_SEND {0x67, 0x61, 0x6d, 0x69, 0x6e, 0x67} // Magic command for the handshake +#define REQUEST_STATE_CMD 0x53 // 'S' to request the game state + +const int ROW_PINS[ROWS] = {7, 6, 5, 4}; +const int COL_PINS[COLS] = {10, 9, 8}; +const char* validButtons[TOTAL_LEVELS] = {"A2", "B1", "D3", "C2", "C3"}; +const char bombCode[] = "1234"; + +TM1637Display display(CLK, DIO); + +typedef enum { + STATE_UNINITIALIZED = 0x00, + STATE_RESET = 0x01, + STATE_PLAYING = 0x02, + STATE_SOLVED = 0x03, + STATE_ERROR = 0x04 +} PuzzleState; + +PuzzleState puzzleState = STATE_UNINITIALIZED; +int currentLevel = 0; + +void requestEvent() { + if (puzzleState == STATE_PLAYING) { + uint8_t responseData[] = HANDSHAKE_SEND; + Wire.write(responseData, sizeof(responseData)); + Serial.println("Handshake response sent."); + } +} + +void blink_display(char num) { + while(puzzleState == STATE_UNINITIALIZED || puzzleState == STATE_ERROR) { + display.showNumberDecEx(0, 0b11111111, true); // Display "0000" with all digits on + delay(500); + display.clear(); + delay(500); + } +} + +void display_final_code(const char* code) { + uint8_t segs[4] = {0, 0, 0, 0}; + int numDigits = strlen(code); + numDigits = numDigits > 4 ? 4 : numDigits; + + for (int i = 0; i < numDigits; i++) { + segs[i] = display.encodeDigit(code[i] - '0'); + } + + display.setSegments(segs, numDigits, 0); +} + +void check_button_press() { + for (int col = 0; col < COLS; col++) { + digitalWrite(COL_PINS[col], LOW); + for (int row = 0; row < ROWS; row++) { + if (digitalRead(ROW_PINS[row]) == LOW) { + delay(50); + if (digitalRead(ROW_PINS[row]) == LOW) { + char keyPress[3] = {'A' + row, '1' + col, '\0'}; + Serial.print("Keypress detected: "); + Serial.println(keyPress); + if (strcmp(keyPress, validButtons[currentLevel]) == 0) { + currentLevel++; + if (currentLevel >= TOTAL_LEVELS) { + puzzleState = STATE_SOLVED; + Serial.println("Puzzle solved!"); + display.showNumberDec(currentLevel + 1, true); + digitalWrite(SOLVED_PIN, HIGH); + } else { + puzzleState = STATE_PLAYING; + } + } else { + currentLevel = 0; + } + while (digitalRead(ROW_PINS[row]) == LOW) {} // Ensure button release + } + } + } + digitalWrite(COL_PINS[col], HIGH); + } +} + +void initialize_system() { + for (int i = 0; i < ROWS; i++) { + pinMode(ROW_PINS[i], INPUT_PULLUP); + } + for (int i = 0; i < COLS; i++) { + pinMode(COL_PINS[i], OUTPUT); + digitalWrite(COL_PINS[i], HIGH); + } + Serial.println("GPIO and display initialized."); +} + +void receiveEvent(int howMany) { + if (howMany == 6) { + uint8_t expectedBytes[] = HANDSHAKE_RECEIVED; + uint8_t receivedBytes[6]; + bool match = true; + + for (int i = 0; i < 6; i++) { + receivedBytes[i] = Wire.read(); + if (receivedBytes[i] != expectedBytes[i]) { + match = false; + break; + } + } + + if (match) { + Serial.println("Correct handshake data received."); + puzzleState = STATE_PLAYING; + initialize_system(); + } else { + Serial.println("Incorrect handshake data received."); + puzzleState = STATE_ERROR; + } + } else { + Serial.print("Received wrong number of bytes: "); + Serial.println(howMany); + puzzleState = STATE_ERROR; + } +} + + +void setup() { + Serial.begin(115200); + pinMode(SOLVED_PIN, OUTPUT); + digitalWrite(SOLVED_PIN, LOW); + display.setBrightness(0x0f); + + Wire.begin(I2C_MODULE_ADDRESS); + Wire.onRequest(requestEvent); + Wire.onReceive(receiveEvent); + + // Initialize display with blinking zeros to indicate no connection or initialization state + blink_display('0'); +} + +void loop() { + switch(puzzleState) { + case STATE_PLAYING: + check_button_press(); + delay(100); + break; + case STATE_SOLVED: + display_final_code(bombCode); + digitalWrite(SOLVED_PIN, HIGH); + Serial.println("Final display shown. Puzzle complete."); + break; + case STATE_ERROR: + case STATE_UNINITIALIZED: + blink_display('0'); + break; + } +}
\ No newline at end of file diff --git a/puzzle/vault/makefile b/puzzle/vault/makefile new file mode 100644 index 0000000..509d8e3 --- /dev/null +++ b/puzzle/vault/makefile @@ -0,0 +1,20 @@ +TARGET = $(BUILD_DIR)/main.elf + +include ../../lazy.mk + +export SERIAL_PORT ?= /dev/ttyACM0 +flash: upload-main; +upload-main: $(TARGET) + +test: test_a test_b; + +test_a: + $(MAKE) -C . clean + $(MAKE) -E CMFLAGS+=-D\ CMAKE_CXX_FLAGS=-DTEST_A -C . + $(MAKE) -E SERIAL_PORT=/dev/ttyACM0 -C . flash + +test_b: + $(MAKE) -C . clean + $(MAKE) -E CMFLAGS+=-D\ CMAKE_CXX_FLAGS=-DTEST_B -C . + $(MAKE) -E SERIAL_PORT=/dev/ttyACM1 -C . flash + diff --git a/puzzle/vault/mod.c b/puzzle/vault/mod.c new file mode 100644 index 0000000..058a585 --- /dev/null +++ b/puzzle/vault/mod.c @@ -0,0 +1,6 @@ +#include "pb.h" +#include "pb-mod.h" + +const char * PB_MOD_NAME = "dummy"; +const i2c_addr_t PB_MOD_ADDR = PB_ADDR_MOD_DUMMY; + |