1 files changed, 0 insertions, 64 deletions
diff --git a/main/pbdrv.h b/main/pbdrv.h
deleted file mode 100644
index 9496aa9..0000000
--- a/main/pbdrv.h
+++ /dev/null
@@ -1,64 +0,0 @@
-#pragma once
-
-#include "pb-types.h"
-
-/**
- * \ingroup pb_drv
- * \defgroup pb_drv_rp2040 RP2040
- * \brief Raspberry Pi Pico and Pico W driver
- *
- * \note This file is no longer inside `lib/pbdrv/drv/rp2040` as it is tightly
- * coupled to both the pico-sdk and FreeRTOS functions. I have tried to get
- * FreeRTOS to play nicely with the CMake subproject layout, but the pico-sdk
- * and the RP2040 port of FreeRTOS both rely on CMake's import() functionality,
- * which makes using FreeRTOS in a libary context extremely messy.
- *
- * \warning The workaround implemented in this driver was already kind of
- * messy, and **a different microcontroller should be used for the main
- * controller instead**. Please see the handover document for more details.
- *
- * \{
- */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-//! Puzzle bus driver setup
-void pb_setup();
-
-/**
- * \note While the RP2040's datasheet claims it supports multi-master
- * configurations by implementing bus arbitration, it does not natively support
- * a mode where it is configured as a (multi-)master with a slave address, such
- * that it can be addressed by other multi-masters. This function includes a
- * hacky workaround that teporarily sets the RP2040 to I2C master mode to send
- * a message, and then restores it back to slave mode.
- *
- * \warning This approach results in some received frames being (partially)
- * dropped in the time period between the invocation of this function and the
- * bus becoming idle (and the message is sent).
- */
-void pb_i2c_send(i2c_addr_t addr, const uint8_t * buf, size_t sz);
-
-/**
- * \brief Scan the bus for I2C slaves, and send handshake messages to ACK-ing
- * slaves.
- *
- * \note As a result of the RP2040 hardware limitations, this function is also
- * implemented in this file, even though it does not belong to the puzzle bus
- * driver.
- *
- * \warning In order to not miss any handshake responses, the bus should remain
- * busy during the entire scan. The \c nostop parameter of the \c
- * i2c_write_timeout_us() function from the pico-sdk does not seem to keep the
- * bus busy.
- */
-void bus_scan();
-
-/// \}
-
-#ifdef __cplusplus
-}
-#endif
-