Feedback applied

13 files changed, 0 insertions, 2771 deletions

diff --git a/main/puzzle/vault/arduino-vaultpuzzle/arduino-vaultpuzzle.ino b/main/puzzle/vault/arduino-vaultpuzzle/arduino-vaultpuzzle.ino
deleted file mode 100644
index 18509d3..0000000
--- a/main/puzzle/vault/arduino-vaultpuzzle/arduino-vaultpuzzle.ino
+++ /dev/null
@@ -1,130 +0,0 @@
-#include <Wire.h>
-
-// Definitions for GPIO numbers, change these according to your hardware setup
-#define TOTAL_LEVELS 5
-#define TAG "VaultPuzzle"
-
-// Key Matrix Pin Configuration
-#define ROWS 4
-#define COLS 3
-const int ROW_PINS[ROWS] = {32, 33, 25, 26}; // Update these pin numbers based on your Arduino setup
-const int COL_PINS[COLS] = {27, 14, 12}; // Update these pin numbers based on your Arduino setup
-
-typedef enum {
-    STATE_UNINITIALIZED,
-    STATE_RESET,
-    STATE_PLAYING,
-    STATE_SOLVED,
-    STATE_ERROR
-} PuzzleState;
-
-const char* validButtons[TOTAL_LEVELS] = {"A3", "F1", "U4", "C2", "L1"};
-PuzzleState puzzleState = STATE_UNINITIALIZED;
-int currentLevel = 0;
-
-// Function prototypes
-void send_i2c_update(PuzzleState state);
-void display_code(int level);
-void initialize_system();
-void check_button_press();
-void update_state_after_button_press(bool validPress);
-
-void setup() {
-  Serial.begin(9600);
-  Wire.begin(); // Initialize I2C as master
-  initialize_system();
-  Serial.println("GPIO and I2C initialized.");
-}
-
-void loop() {
-  while (puzzleState != STATE_SOLVED) {
-      check_button_press();
-      delay(100); // Non-blocking delay
-  }
-}
-
-void send_i2c_update(PuzzleState state) {
-    uint8_t data;
-    switch (state) {
-        case STATE_UNINITIALIZED: data = 0x00; break;
-        case STATE_RESET: data = 0x01; break;
-        case STATE_PLAYING: data = 0x02; break;
-        case STATE_SOLVED: data = 0x03; break;
-        case STATE_ERROR: data = 0x04; break;
-        default: data = 0xFF; // Unknown state
-    }
-    Serial.print("Sending state "); Serial.println(state);
-    
-    Wire.beginTransmission(I2C_SLAVE_ADDR);
-    Wire.write(data);
-    byte error = Wire.endTransmission();
-    
-    if (error == 0) {
-        Serial.print("State update sent successfully.");
-    } else {
-        Serial.print("Failed to send state update via I2C.");
-    }
-}
-
-void display_code(int level) {
-    Serial.print("Displaying code for level "); Serial.println(level);
-    
-    Wire.beginTransmission(I2C_SLAVE_ADDR);
-    Wire.write(level);
-    byte error = Wire.endTransmission();
-    
-    if (error == 0) {
-        Serial.print("Code for level "); Serial.print(level); Serial.println(" displayed successfully.");
-    } else {
-        Serial.print("Failed to display code for level "); Serial.print(level); Serial.println(" via I2C.");
-    }
-}
-
-void initialize_system() {
-    // Configure the rows as input with pull-up
-    for (int i = 0; i < ROWS; i++) {
-      pinMode(ROW_PINS[i], INPUT_PULLUP);
-    }
-    
-    // Configure the columns as output
-    for (int i = 0; i < COLS; i++) {
-      pinMode(COL_PINS[i], OUTPUT);
-      digitalWrite(COL_PINS[i], HIGH);
-    }
-}
-
-void check_button_press() {
-    char keyPress[3] = {0};
-    for (int col = 0; col < COLS; col++) {
-        digitalWrite(COL_PINS[col], LOW); // Activate column
-        for (int row = 0; row < ROWS; row++) {
-            if (digitalRead(ROW_PINS[row]) == LOW) { // Detect if any row is activated
-                keyPress[0] = 'A' + row;
-                keyPress[1] = '1' + col;
-                keyPress[2] = '\0';
-                Serial.print("Keypress detected: "); Serial.println(keyPress);
-                update_state_after_button_press(strcmp(keyPress, validButtons[currentLevel]) == 0);
-                while (digitalRead(ROW_PINS[row]) == LOW) {} // Wait for release
-            }
-        }
-        digitalWrite(COL_PINS[col], HIGH); // Deactivate column
-    }
-}
-
-void update_state_after_button_press(bool validPress) {
-    if (validPress) {
-        if (currentLevel >= TOTAL_LEVELS) {
-            puzzleState = STATE_SOLVED;
-            Serial.println("Puzzle solved!");
-            send_i2c_update(puzzleState);
-        } else {
-            puzzleState = STATE_PLAYING;
-            currentLevel++;
-            display_code(currentLevel);
-        }
-    } else {
-        puzzleState = STATE_ERROR;
-        Serial.println("Error in input");
-    }
-    send_i2c_update(puzzleState);
-}
diff --git a/main/puzzle/vault/esp-vaultpuzzle/.devcontainer/Dockerfile b/main/puzzle/vault/esp-vaultpuzzle/.devcontainer/Dockerfile
deleted file mode 100644
index 1fe78dc..0000000
--- a/main/puzzle/vault/esp-vaultpuzzle/.devcontainer/Dockerfile
+++ /dev/null
@@ -1,47 +0,0 @@
-FROM espressif/idf
-
-ARG DEBIAN_FRONTEND=nointeractive
-ARG CONTAINER_USER=esp
-ARG USER_UID=1000
-ARG USER_GID=$USER_UID
-
-RUN apt-get update \
-  && apt install -y -q \
-  cmake \
-  git \
-  libglib2.0-0 \
-  libnuma1 \
-  libpixman-1-0 \
-  && rm -rf /var/lib/apt/lists/*
-
-# QEMU
-ENV QEMU_REL=esp_develop_8.2.0_20240122
-ENV QEMU_SHA256=e7c72ef5705ad1444d391711088c8717fc89f42e9bf6d1487f9c2a326b8cfa83
-ENV QEMU_DIST=qemu-xtensa-softmmu-${QEMU_REL}-x86_64-linux-gnu.tar.xz
-ENV QEMU_URL=https://github.com/espressif/qemu/releases/download/esp-develop-8.2.0-20240122/${QEMU_DIST}
-
-ENV LC_ALL=C.UTF-8
-ENV LANG=C.UTF-8
-
-RUN wget --no-verbose ${QEMU_URL} \
-  && echo "${QEMU_SHA256} *${QEMU_DIST}" | sha256sum --check --strict - \
-  && tar -xf $QEMU_DIST -C /opt \
-  && rm ${QEMU_DIST}
-
-ENV PATH=/opt/qemu/bin:${PATH}
-
-RUN groupadd --gid $USER_GID $CONTAINER_USER \
-  && adduser --uid $USER_UID --gid $USER_GID --disabled-password --gecos "" ${CONTAINER_USER} \
-  && usermod -a -G root $CONTAINER_USER && usermod -a -G dialout $CONTAINER_USER
-
-RUN chmod -R 775 /opt/esp/python_env/
-
-USER ${CONTAINER_USER}
-ENV USER=${CONTAINER_USER}
-WORKDIR /home/${CONTAINER_USER}
-
-RUN echo "source /opt/esp/idf/export.sh > /dev/null 2>&1" >> ~/.bashrc
-
-ENTRYPOINT [ "/opt/esp/entrypoint.sh" ]
-
-CMD ["/bin/bash", "-c"]
\ No newline at end of file
diff --git a/main/puzzle/vault/esp-vaultpuzzle/.devcontainer/devcontainer.json b/main/puzzle/vault/esp-vaultpuzzle/.devcontainer/devcontainer.json
deleted file mode 100644
index 1d913ec..0000000
--- a/main/puzzle/vault/esp-vaultpuzzle/.devcontainer/devcontainer.json
+++ /dev/null
@@ -1,45 +0,0 @@
-// For format details, see https://aka.ms/devcontainer.json. For config options, see the README at:
-// https://github.com/microsoft/vscode-dev-containers/tree/v0.183.0/containers/ubuntu
-{
-	"name": "ESP-IDF QEMU",
-	"build": {
-		"dockerfile": "Dockerfile"
-	},
-	// Add the IDs of extensions you want installed when the container is created
-	"workspaceMount": "source=${localWorkspaceFolder},target=${localWorkspaceFolder},type=bind",
-	/* the path of workspace folder to be opened after container is running
-	 */
-	"workspaceFolder": "${localWorkspaceFolder}",
-	"mounts": [
-		"source=extensionCache,target=/root/.vscode-server/extensions,type=volume"
-	],
-	"customizations": {
-		"vscode": {
-			"settings": {
-				"terminal.integrated.defaultProfile.linux": "bash",
-				"idf.espIdfPath": "/opt/esp/idf",
-				"idf.customExtraPaths": "",
-				"idf.pythonBinPath": "/opt/esp/python_env/idf5.3_py3.10_env/bin/python",
-				"idf.toolsPath": "/opt/esp",
-				"idf.gitPath": "/usr/bin/git"
-			},
-			"extensions": [
-				"espressif.esp-idf-extension"
-			],
-		},
-		"codespaces": {
-			"settings": {
-				"terminal.integrated.defaultProfile.linux": "bash",
-				"idf.espIdfPath": "/opt/esp/idf",
-				"idf.customExtraPaths": "",
-				"idf.pythonBinPath": "/opt/esp/python_env/idf5.3_py3.10_env/bin/python",
-				"idf.toolsPath": "/opt/esp",
-				"idf.gitPath": "/usr/bin/git"
-			},
-			"extensions": [
-				"espressif.esp-idf-extension"
-			],
-		}
-	},
-	"runArgs": ["--privileged"]
-}
\ No newline at end of file
diff --git a/main/puzzle/vault/esp-vaultpuzzle/.vscode/c_cpp_properties.json b/main/puzzle/vault/esp-vaultpuzzle/.vscode/c_cpp_properties.json
deleted file mode 100644
index ee1cac1..0000000
--- a/main/puzzle/vault/esp-vaultpuzzle/.vscode/c_cpp_properties.json
+++ /dev/null
@@ -1,27 +0,0 @@
-{
-    "configurations": [
-        {
-            "name": "ESP-IDF",
-            "compilerPath": "${config:idf.toolsPathWin}\\tools\\xtensa-esp-elf\\esp-13.2.0_20230928\\xtensa-esp-elf\\bin\\xtensa-esp32-elf-gcc.exe",
-            "compileCommands": "${workspaceFolder}/build/compile_commands.json",
-            "includePath": [
-                "${config:idf.espIdfPath}/components/**",
-                "${config:idf.espIdfPathWin}/components/**",
-                "${config:idf.espAdfPath}/components/**",
-                "${config:idf.espAdfPathWin}/components/**",
-                "${workspaceFolder}/**"
-            ],
-            "browse": {
-                "path": [
-                    "${config:idf.espIdfPath}/components",
-                    "${config:idf.espIdfPathWin}/components",
-                    "${config:idf.espAdfPath}/components/**",
-                    "${config:idf.espAdfPathWin}/components/**",
-                    "${workspaceFolder}"
-                ],
-                "limitSymbolsToIncludedHeaders": false
-            }
-        }
-    ],
-    "version": 4
-}
diff --git a/main/puzzle/vault/esp-vaultpuzzle/.vscode/launch.json b/main/puzzle/vault/esp-vaultpuzzle/.vscode/launch.json
deleted file mode 100644
index 6d2236f..0000000
--- a/main/puzzle/vault/esp-vaultpuzzle/.vscode/launch.json
+++ /dev/null
@@ -1,10 +0,0 @@
-{
-  "version": "0.2.0",
-  "configurations": [
-    {
-      "type": "espidf",
-      "name": "Launch",
-      "request": "launch"
-    }
-  ]
-}
\ No newline at end of file
diff --git a/main/puzzle/vault/esp-vaultpuzzle/.vscode/settings.json b/main/puzzle/vault/esp-vaultpuzzle/.vscode/settings.json
deleted file mode 100644
index 49f00b0..0000000
--- a/main/puzzle/vault/esp-vaultpuzzle/.vscode/settings.json
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-    "C_Cpp.intelliSenseEngine": "default",
-    "idf.adapterTargetName": "esp32",
-    "idf.customExtraPaths": "C:\\Users\\Elwin\\.espressif\\tools\\xtensa-esp-elf-gdb\\12.1_20231023\\xtensa-esp-elf-gdb\\bin;C:\\Users\\Elwin\\.espressif\\tools\\riscv32-esp-elf-gdb\\12.1_20231023\\riscv32-esp-elf-gdb\\bin;C:\\Users\\Elwin\\.espressif\\tools\\xtensa-esp-elf\\esp-13.2.0_20230928\\xtensa-esp-elf\\bin;C:\\Users\\Elwin\\.espressif\\tools\\riscv32-esp-elf\\esp-13.2.0_20230928\\riscv32-esp-elf\\bin;C:\\Users\\Elwin\\.espressif\\tools\\esp32ulp-elf\\2.35_20220830\\esp32ulp-elf\\bin;C:\\Users\\Elwin\\.espressif\\tools\\cmake\\3.24.0\\bin;C:\\Users\\Elwin\\.espressif\\tools\\openocd-esp32\\v0.12.0-esp32-20230921\\openocd-esp32\\bin;C:\\Users\\Elwin\\.espressif\\tools\\ninja\\1.11.1;C:\\Users\\Elwin\\.espressif\\tools\\idf-exe\\1.0.3;C:\\Users\\Elwin\\.espressif\\tools\\ccache\\4.8\\ccache-4.8-windows-x86_64;C:\\Users\\Elwin\\.espressif\\tools\\dfu-util\\0.11\\dfu-util-0.11-win64;C:\\Users\\Elwin\\.espressif\\tools\\esp-rom-elfs\\20230320",
-    "idf.customExtraVars": {
-        "OPENOCD_SCRIPTS": "C:\\Users\\Elwin\\.espressif\\tools\\openocd-esp32\\v0.12.0-esp32-20230921/openocd-esp32/share/openocd/scripts",
-        "IDF_CCACHE_ENABLE": "1",
-        "ESP_ROM_ELF_DIR": "C:\\Users\\Elwin\\.espressif\\tools\\esp-rom-elfs\\20230320/"
-    },
-    "idf.espIdfPathWin": "C:\\Users\\Elwin\\esp\\v5.2.1\\esp-idf",
-    "idf.openOcdConfigs": [
-        "interface/ftdi/esp32_devkitj_v1.cfg",
-        "target/esp32.cfg"
-    ],
-    "idf.pythonBinPathWin": "C:\\Users\\Elwin\\.espressif\\python_env\\idf5.2_py3.11_env\\Scripts\\python.exe",
-    "idf.toolsPathWin": "C:\\Users\\Elwin\\.espressif"
-}
diff --git a/main/puzzle/vault/esp-vaultpuzzle/.vscode/tasks.json b/main/puzzle/vault/esp-vaultpuzzle/.vscode/tasks.json
deleted file mode 100644
index 1dc7915..0000000
--- a/main/puzzle/vault/esp-vaultpuzzle/.vscode/tasks.json
+++ /dev/null
@@ -1,259 +0,0 @@
-{
-  "version": "2.0.0",
-  "tasks": [
-    {
-      "label": "Build - Build project",
-      "type": "shell",
-      "command": "${config:idf.pythonBinPath} ${config:idf.espIdfPath}/tools/idf.py build",
-      "windows": {
-        "command": "${config:idf.pythonBinPathWin} ${config:idf.espIdfPathWin}\\tools\\idf.py build",
-        "options": {
-          "env": {
-            "PATH": "${env:PATH};${config:idf.customExtraPaths}"
-          }
-        }
-      },
-      "options": {
-        "env": {
-          "PATH": "${env:PATH}:${config:idf.customExtraPaths}"
-        }
-      },
-      "problemMatcher": [
-        {
-          "owner": "cpp",
-          "fileLocation": [
-            "autoDetect",
-            "${workspaceFolder}"
-          ],
-          "pattern": {
-            "regexp": "^(.*?):(\\d+):(\\d*):?\\s+(?:fatal\\s+)?(warning|error):\\s+(.*)$",
-            "file": 1,
-            "line": 2,
-            "column": 3,
-            "severity": 4,
-            "message": 5
-          }
-        }
-      ],
-      "group": {
-        "kind": "build",
-        "isDefault": true
-      }
-    },
-    {
-      "label": "Set ESP-IDF Target",
-      "type": "shell",
-      "command": "${command:espIdf.setTarget}",
-      "problemMatcher": {
-        "owner": "cpp",
-        "fileLocation": [
-          "autoDetect",
-          "${workspaceFolder}"
-        ],
-        "pattern": {
-          "regexp": "^(.*?):(\\d+):(\\d*):?\\s+(?:fatal\\s+)?(warning|error):\\s+(.*)$",
-          "file": 1,
-          "line": 2,
-          "column": 3,
-          "severity": 4,
-          "message": 5
-        }
-      }
-    },
-    {
-      "label": "Clean - Clean the project",
-      "type": "shell",
-      "command": "${config:idf.pythonBinPath} ${config:idf.espIdfPath}/tools/idf.py fullclean",
-      "windows": {
-        "command": "${config:idf.pythonBinPathWin} ${config:idf.espIdfPathWin}\\tools\\idf.py fullclean",
-        "options": {
-          "env": {
-            "PATH": "${env:PATH};${config:idf.customExtraPaths}"
-          }
-        }
-      },
-      "options": {
-        "env": {
-          "PATH": "${env:PATH}:${config:idf.customExtraPaths}"
-        }
-      },
-      "problemMatcher": [
-        {
-          "owner": "cpp",
-          "fileLocation": [
-            "autoDetect",
-            "${workspaceFolder}"
-          ],
-          "pattern": {
-            "regexp": "^(.*?):(\\d+):(\\d*):?\\s+(?:fatal\\s+)?(warning|error):\\s+(.*)$",
-            "file": 1,
-            "line": 2,
-            "column": 3,
-            "severity": 4,
-            "message": 5
-          }
-        }
-      ]
-    },
-    {
-      "label": "Flash - Flash the device",
-      "type": "shell",
-      "command": "${config:idf.pythonBinPath} ${config:idf.espIdfPath}/tools/idf.py -p ${config:idf.port} -b ${config:idf.flashBaudRate} flash",
-      "windows": {
-        "command": "${config:idf.pythonBinPathWin} ${config:idf.espIdfPathWin}\\tools\\idf.py flash -p ${config:idf.portWin} -b ${config:idf.flashBaudRate}",
-        "options": {
-          "env": {
-            "PATH": "${env:PATH};${config:idf.customExtraPaths}"
-          }
-        }
-      },
-      "options": {
-        "env": {
-          "PATH": "${env:PATH}:${config:idf.customExtraPaths}"
-        }
-      },
-      "problemMatcher": [
-        {
-          "owner": "cpp",
-          "fileLocation": [
-            "autoDetect",
-            "${workspaceFolder}"
-          ],
-          "pattern": {
-            "regexp": "^(.*?):(\\d+):(\\d*):?\\s+(?:fatal\\s+)?(warning|error):\\s+(.*)$",
-            "file": 1,
-            "line": 2,
-            "column": 3,
-            "severity": 4,
-            "message": 5
-          }
-        }
-      ]
-    },
-    {
-      "label": "Monitor: Start the monitor",
-      "type": "shell",
-      "command": "${config:idf.pythonBinPath} ${config:idf.espIdfPath}/tools/idf.py -p ${config:idf.port} monitor",
-      "windows": {
-        "command": "${config:idf.pythonBinPathWin} ${config:idf.espIdfPathWin}\\tools\\idf.py -p ${config:idf.portWin} monitor",
-        "options": {
-          "env": {
-            "PATH": "${env:PATH};${config:idf.customExtraPaths}"
-          }
-        }
-      },
-      "options": {
-        "env": {
-          "PATH": "${env:PATH}:${config:idf.customExtraPaths}"
-        }
-      },
-      "problemMatcher": [
-        {
-          "owner": "cpp",
-          "fileLocation": [
-            "autoDetect",
-            "${workspaceFolder}"
-          ],
-          "pattern": {
-            "regexp": "^(.*?):(\\d+):(\\d*):?\\s+(?:fatal\\s+)?(warning|error):\\s+(.*)$",
-            "file": 1,
-            "line": 2,
-            "column": 3,
-            "severity": 4,
-            "message": 5
-          }
-        }
-      ],
-      "dependsOn": "Flash - Flash the device"
-    },
-    {
-      "label": "OpenOCD: Start openOCD",
-      "type": "shell",
-      "presentation": {
-        "echo": true,
-        "reveal": "never",
-        "focus": false,
-        "panel": "new"
-      },
-      "command": "openocd -s ${command:espIdf.getOpenOcdScriptValue} ${command:espIdf.getOpenOcdConfigs}",
-      "windows": {
-        "command": "openocd.exe -s ${command:espIdf.getOpenOcdScriptValue} ${command:espIdf.getOpenOcdConfigs}",
-        "options": {
-          "env": {
-            "PATH": "${env:PATH};${config:idf.customExtraPaths}"
-          }
-        }
-      },
-      "options": {
-        "env": {
-          "PATH": "${env:PATH}:${config:idf.customExtraPaths}"
-        }
-      },
-      "problemMatcher": {
-        "owner": "cpp",
-        "fileLocation": [
-          "autoDetect",
-          "${workspaceFolder}"
-        ],
-        "pattern": {
-          "regexp": "^(.*?):(\\d+):(\\d*):?\\s+(?:fatal\\s+)?(warning|error):\\s+(.*)$",
-          "file": 1,
-          "line": 2,
-          "column": 3,
-          "severity": 4,
-          "message": 5
-        }
-      }
-    },
-    {
-      "label": "adapter",
-      "type": "shell",
-      "command": "${config:idf.pythonBinPath}",
-      "isBackground": true,
-      "options": {
-        "env": {
-          "PATH": "${env:PATH}:${config:idf.customExtraPaths}",
-          "PYTHONPATH": "${command:espIdf.getExtensionPath}/esp_debug_adapter/debug_adapter"
-        }
-      },
-      "problemMatcher": {
-        "background": {
-          "beginsPattern": "\bDEBUG_ADAPTER_STARTED\b",
-          "endsPattern": "DEBUG_ADAPTER_READY2CONNECT",
-          "activeOnStart": true
-        },
-        "pattern": {
-          "regexp": "(\\d+)-(\\d+)-(\\d+)\\s(\\d+):(\\d+):(\\d+),(\\d+)\\s-(.+)\\s(ERROR)",
-          "file": 8,
-          "line": 2,
-          "column": 3,
-          "severity": 4,
-          "message": 9
-        }
-      },
-      "args": [
-        "${command:espIdf.getExtensionPath}/esp_debug_adapter/debug_adapter_main.py",
-        "-e",
-        "${workspaceFolder}/build/${command:espIdf.getProjectName}.elf",
-        "-s",
-        "$OPENOCD_SCRIPTS",
-        "-dn",
-        "esp32",
-        "-om",
-        "connect_to_instance",
-        "-t",
-        "xtensa-esp32-elf-"
-
-      ],
-      "windows": {
-        "command": "${config:idf.pythonBinPathWin}",
-        "options": {
-          "env": {
-            "PATH": "${env:PATH};${config:idf.customExtraPaths}",
-            "PYTHONPATH": "${command:espIdf.getExtensionPath}/esp_debug_adapter/debug_adapter"
-          }
-        }
-      }
-    }
-  ]
-}
\ No newline at end of file
diff --git a/main/puzzle/vault/esp-vaultpuzzle/CMakeLists.txt b/main/puzzle/vault/esp-vaultpuzzle/CMakeLists.txt
deleted file mode 100644
index 7b228e6..0000000
--- a/main/puzzle/vault/esp-vaultpuzzle/CMakeLists.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-# For more information about build system see
-# https://docs.espressif.com/projects/esp-idf/en/latest/api-guides/build-system.html
-# The following five lines of boilerplate have to be in your project's
-# CMakeLists in this exact order for cmake to work correctly
-cmake_minimum_required(VERSION 3.16)
-
-include($ENV{IDF_PATH}/tools/cmake/project.cmake)
-project(esp-vaultpuzzle)
diff --git a/main/puzzle/vault/esp-vaultpuzzle/README.md b/main/puzzle/vault/esp-vaultpuzzle/README.md
deleted file mode 100644
index 2bd3097..0000000
--- a/main/puzzle/vault/esp-vaultpuzzle/README.md
+++ /dev/null
@@ -1,35 +0,0 @@
-| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-H2 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
-| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- | -------- |
-
-# _Sample project_
-
-(See the README.md file in the upper level 'examples' directory for more information about examples.)
-
-This is the simplest buildable example. The example is used by command `idf.py create-project`
-that copies the project to user specified path and set it's name. For more information follow the [docs page](https://docs.espressif.com/projects/esp-idf/en/latest/api-guides/build-system.html#start-a-new-project)
-
-
-
-## How to use example
-We encourage the users to use the example as a template for the new projects.
-A recommended way is to follow the instructions on a [docs page](https://docs.espressif.com/projects/esp-idf/en/latest/api-guides/build-system.html#start-a-new-project).
-
-## Example folder contents
-
-The project **sample_project** contains one source file in C language [main.c](main/main.c). The file is located in folder [main](main).
-
-ESP-IDF projects are built using CMake. The project build configuration is contained in `CMakeLists.txt`
-files that provide set of directives and instructions describing the project's source files and targets
-(executable, library, or both). 
-
-Below is short explanation of remaining files in the project folder.
-
-```
-├── CMakeLists.txt
-├── main
-│   ├── CMakeLists.txt
-│   └── main.c
-└── README.md                  This is the file you are currently reading
-```
-Additionally, the sample project contains Makefile and component.mk files, used for the legacy Make based build system. 
-They are not used or needed when building with CMake and idf.py.
diff --git a/main/puzzle/vault/esp-vaultpuzzle/main/CMakeLists.txt b/main/puzzle/vault/esp-vaultpuzzle/main/CMakeLists.txt
deleted file mode 100644
index cf2c455..0000000
--- a/main/puzzle/vault/esp-vaultpuzzle/main/CMakeLists.txt
+++ /dev/null
@@ -1,2 +0,0 @@
-idf_component_register(SRCS "main.c"
-                    INCLUDE_DIRS ".")
diff --git a/main/puzzle/vault/esp-vaultpuzzle/main/main.c b/main/puzzle/vault/esp-vaultpuzzle/main/main.c
deleted file mode 100644
index a021615..0000000
--- a/main/puzzle/vault/esp-vaultpuzzle/main/main.c
+++ /dev/null
@@ -1,158 +0,0 @@
-#include <stdio.h>
-#include "driver/gpio.h"
-#include "esp_log.h"
-#include "driver/i2c.h"
-
-// Definitions for GPIO numbers, change these according to your hardware setup
-#define BUTTON_GPIO GPIO_NUM_0 // Example GPIO for button input (not used directly in final implementation)
-#define TOTAL_LEVELS 5
-#define TAG "VaultPuzzle"
-#define I2C_MASTER_NUM I2C_NUM_0
-
-// Key Matrix Pin Configuration
-#define ROWS 4
-#define COLS 3
-#define ROW_PINS {GPIO_NUM_32, GPIO_NUM_33, GPIO_NUM_25, GPIO_NUM_26}
-#define COL_PINS {GPIO_NUM_27, GPIO_NUM_14, GPIO_NUM_12}
-
-typedef enum {
-    STATE_UNINITIALIZED,
-    STATE_RESET,
-    STATE_PLAYING,
-    STATE_SOLVED,
-    STATE_ERROR
-} PuzzleState;
-
-const char* validButtons[TOTAL_LEVELS] = {"A3", "F1", "U4", "C2", "L1"};
-PuzzleState puzzleState = STATE_UNINITIALIZED;
-int currentLevel = 0;
-
-// Function prototypes
-void i2c_master_init();
-void send_i2c_update(PuzzleState state);
-void display_code(int level);
-void initialize_system();
-void check_button_press();
-
-// Initialize I2C and GPIO for keypad and display
-void i2c_master_init() {
-    i2c_config_t conf;
-    conf.mode = I2C_MODE_MASTER;
-    conf.sda_io_num = I2C_MASTER_SDA_IO;
-    conf.sda_pullup_en = GPIO_PULLUP_ENABLE;
-    conf.scl_io_num = I2C_MASTER_SCL_IO;
-    conf.scl_pullup_en = GPIO_PULLUP_ENABLE;
-    conf.master.clk_speed = I2C_MASTER_FREQ_HZ;
-    i2c_param_config(I2C_MASTER_NUM, &conf);
-    i2c_driver_install(I2C_MASTER_NUM, conf.mode, 0, 0, 0);
-}
-
-void send_i2c_update(PuzzleState state) {
-    uint8_t data;
-    switch (state) {
-        case STATE_UNINITIALIZED: data = 0x00; break;
-        case STATE_RESET: data = 0x01; break;
-        case STATE_PLAYING: data = 0x02; break;
-        case STATE_SOLVED: data = 0x03; break;
-        case STATE_ERROR: data = 0x04; break;
-        default: data = 0xFF; // Unknown state
-    }
-    ESP_LOGI(TAG, "Sending state %d to main controller via I2C.", state);
-    
-    i2c_cmd_handle_t cmd = i2c_cmd_link_create();
-    i2c_master_start(cmd);
-    i2c_master_write_byte(cmd, (I2C_SLAVE_ADDR << 1) | I2C_MASTER_WRITE, true);
-    i2c_master_write_byte(cmd, data, true);
-    i2c_master_stop(cmd);
-    esp_err_t ret = i2c_master_cmd_begin(I2C_MASTER_NUM, cmd, 1000 / portTICK_RATE_MS);
-    i2c_cmd_link_delete(cmd);
-    
-    if (ret == ESP_OK) {
-        ESP_LOGI(TAG, "State update sent successfully.");
-    } else {
-        ESP_LOGE(TAG, "Failed to send state update via I2C.");
-    }
-}
-
-void display_code(int level) {
-    ESP_LOGI(TAG, "Displaying code for level %d on the 7-segment display.", level);
-    
-    i2c_cmd_handle_t cmd = i2c_cmd_link_create();
-    i2c_master_start(cmd);
-    i2c_master_write_byte(cmd, (I2C_SLAVE_ADDR << 1) | I2C_MASTER_WRITE, true);
-    i2c_master_write_byte(cmd, level, true);
-    i2c_master_stop(cmd);
-    esp_err_t ret = i2c_master_cmd_begin(I2C_MASTER_NUM, cmd, 1000 / portTICK_RATE_MS);
-    i2c_cmd_link_delete(cmd);
-    
-    if (ret == ESP_OK) {
-        ESP_LOGI(TAG, "Code for level %d displayed successfully.", level);
-    } else {
-        ESP_LOGE(TAG, "Failed to display code for level %d via I2C.", level);
-    }
-}
-
-void initialize_system() {
-    gpio_config_t io_conf;
-    // Configure the rows as input with pull-up
-    io_conf.intr_type = GPIO_INTR_DISABLE;
-    io_conf.mode = GPIO_MODE_INPUT;
-    io_conf.pin_bit_mask = (1ULL << ROW_PINS[0]) | (1ULL << ROW_PINS[1]) | (1ULL << ROW_PINS[2]) | (1ULL << ROW_PINS[3]);
-    io_conf.pull_down_en = 0;
-    io_conf.pull_up_en = 1;
-    gpio_config(&io_conf);
-    
-    // Configure the columns as output
-    io_conf.mode = GPIO_MODE_OUTPUT;
-    io_conf.pin_bit_mask = (1ULL << COL_PINS[0]) | (1ULL << COL_PINS[1]) | (1ULL << COL_PINS[2]);
-    io_conf.pull_down_en = 0;
-    io_conf.pull_up_en = 0;
-    gpio_config(&io_conf);
-}
-
-void check_button_press() {
-    char keyPress[3] = {0};
-    for (int col = 0; col < COLS; col++) {
-        gpio_set_level(COL_PINS[col], 0); // Activate column
-        for (int row = 0; row < ROWS; row++) {
-            if (gpio_get_level(ROW_PINS[row]) == 0) { // Detect if any row is activated
-                keyPress[0] = 'A' + row;
-                keyPress[1] = '1' + col;
-                keyPress[2] = '\0';
-                ESP_LOGI(TAG, "Keypress detected: %s", keyPress);
-                update_state_after_button_press(strcmp(keyPress, validButtons[currentLevel]) == 0);
-                while (gpio_get_level(ROW_PINS[row]) == 0) {} // Wait for release
-            }
-        }
-        gpio_set_level(COL_PINS[col], 1); // Deactivate column
-    }
-}
-
-void update_state_after_button_press(bool validPress) {
-    if (validPress) {
-        if (currentLevel >= TOTAL_LEVELS) {
-            puzzleState = STATE_SOLVED;
-            ESP_LOGI(TAG, "Puzzle solved!");
-            send_i2c_update(puzzleState);
-        } else {
-            puzzleState = STATE_PLAYING;
-            currentLevel++;
-            display_code(currentLevel);
-        }
-    } else {
-        puzzleState = STATE_ERROR;
-        ESP_LOGE(TAG, "Error in input");
-    }
-    send_i2c_update(puzzleState);
-}
-
-void app_main() {
-    i2c_master_init();
-    initialize_system();
-    ESP_LOGI("App", "GPIO and I2C initialized.");
-    
-    while (puzzleState != STATE_SOLVED) {
-        check_button_press();
-        vTaskDelay(pdMS_TO_TICKS(100)); // Non-blocking delay
-    }
-}
diff --git a/main/puzzle/vault/esp-vaultpuzzle/sdkconfig b/main/puzzle/vault/esp-vaultpuzzle/sdkconfig
deleted file mode 100644
index e241c6c..0000000
--- a/main/puzzle/vault/esp-vaultpuzzle/sdkconfig
+++ /dev/null
@@ -1,1903 +0,0 @@
-#
-# Automatically generated file. DO NOT EDIT.
-# Espressif IoT Development Framework (ESP-IDF) 5.2.1 Project Configuration
-#
-CONFIG_SOC_BROWNOUT_RESET_SUPPORTED="Not determined"
-CONFIG_SOC_TWAI_BRP_DIV_SUPPORTED="Not determined"
-CONFIG_SOC_DPORT_WORKAROUND="Not determined"
-CONFIG_SOC_CAPS_ECO_VER_MAX=301
-CONFIG_SOC_ADC_SUPPORTED=y
-CONFIG_SOC_DAC_SUPPORTED=y
-CONFIG_SOC_UART_SUPPORTED=y
-CONFIG_SOC_MCPWM_SUPPORTED=y
-CONFIG_SOC_GPTIMER_SUPPORTED=y
-CONFIG_SOC_SDMMC_HOST_SUPPORTED=y
-CONFIG_SOC_BT_SUPPORTED=y
-CONFIG_SOC_PCNT_SUPPORTED=y
-CONFIG_SOC_WIFI_SUPPORTED=y
-CONFIG_SOC_SDIO_SLAVE_SUPPORTED=y
-CONFIG_SOC_TWAI_SUPPORTED=y
-CONFIG_SOC_EFUSE_SUPPORTED=y
-CONFIG_SOC_EMAC_SUPPORTED=y
-CONFIG_SOC_ULP_SUPPORTED=y
-CONFIG_SOC_CCOMP_TIMER_SUPPORTED=y
-CONFIG_SOC_RTC_FAST_MEM_SUPPORTED=y
-CONFIG_SOC_RTC_SLOW_MEM_SUPPORTED=y
-CONFIG_SOC_RTC_MEM_SUPPORTED=y
-CONFIG_SOC_I2S_SUPPORTED=y
-CONFIG_SOC_RMT_SUPPORTED=y
-CONFIG_SOC_SDM_SUPPORTED=y
-CONFIG_SOC_GPSPI_SUPPORTED=y
-CONFIG_SOC_LEDC_SUPPORTED=y
-CONFIG_SOC_I2C_SUPPORTED=y
-CONFIG_SOC_SUPPORT_COEXISTENCE=y
-CONFIG_SOC_AES_SUPPORTED=y
-CONFIG_SOC_MPI_SUPPORTED=y
-CONFIG_SOC_SHA_SUPPORTED=y
-CONFIG_SOC_FLASH_ENC_SUPPORTED=y
-CONFIG_SOC_SECURE_BOOT_SUPPORTED=y
-CONFIG_SOC_TOUCH_SENSOR_SUPPORTED=y
-CONFIG_SOC_BOD_SUPPORTED=y
-CONFIG_SOC_ULP_FSM_SUPPORTED=y
-CONFIG_SOC_CLK_TREE_SUPPORTED=y
-CONFIG_SOC_MPU_SUPPORTED=y
-CONFIG_SOC_WDT_SUPPORTED=y
-CONFIG_SOC_SPI_FLASH_SUPPORTED=y
-CONFIG_SOC_DPORT_WORKAROUND_DIS_INTERRUPT_LVL=5
-CONFIG_SOC_XTAL_SUPPORT_26M=y
-CONFIG_SOC_XTAL_SUPPORT_40M=y
-CONFIG_SOC_XTAL_SUPPORT_AUTO_DETECT=y
-CONFIG_SOC_ADC_RTC_CTRL_SUPPORTED=y
-CONFIG_SOC_ADC_DIG_CTRL_SUPPORTED=y
-CONFIG_SOC_ADC_DMA_SUPPORTED=y
-CONFIG_SOC_ADC_PERIPH_NUM=2
-CONFIG_SOC_ADC_MAX_CHANNEL_NUM=10
-CONFIG_SOC_ADC_ATTEN_NUM=4
-CONFIG_SOC_ADC_DIGI_CONTROLLER_NUM=2
-CONFIG_SOC_ADC_PATT_LEN_MAX=16
-CONFIG_SOC_ADC_DIGI_MIN_BITWIDTH=9
-CONFIG_SOC_ADC_DIGI_MAX_BITWIDTH=12
-CONFIG_SOC_ADC_DIGI_RESULT_BYTES=2
-CONFIG_SOC_ADC_DIGI_DATA_BYTES_PER_CONV=4
-CONFIG_SOC_ADC_DIGI_MONITOR_NUM=0
-CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_HIGH=2
-CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_LOW=20
-CONFIG_SOC_ADC_RTC_MIN_BITWIDTH=9
-CONFIG_SOC_ADC_RTC_MAX_BITWIDTH=12
-CONFIG_SOC_ADC_SHARED_POWER=y
-CONFIG_SOC_SHARED_IDCACHE_SUPPORTED=y
-CONFIG_SOC_IDCACHE_PER_CORE=y
-CONFIG_SOC_CPU_CORES_NUM=2
-CONFIG_SOC_CPU_INTR_NUM=32
-CONFIG_SOC_CPU_HAS_FPU=y
-CONFIG_SOC_HP_CPU_HAS_MULTIPLE_CORES=y
-CONFIG_SOC_CPU_BREAKPOINTS_NUM=2
-CONFIG_SOC_CPU_WATCHPOINTS_NUM=2
-CONFIG_SOC_CPU_WATCHPOINT_MAX_REGION_SIZE=64
-CONFIG_SOC_DAC_CHAN_NUM=2
-CONFIG_SOC_DAC_RESOLUTION=8
-CONFIG_SOC_DAC_DMA_16BIT_ALIGN=y
-CONFIG_SOC_GPIO_PORT=1
-CONFIG_SOC_GPIO_PIN_COUNT=40
-CONFIG_SOC_GPIO_VALID_GPIO_MASK=0xFFFFFFFFFF
-CONFIG_SOC_GPIO_IN_RANGE_MAX=39
-CONFIG_SOC_GPIO_OUT_RANGE_MAX=33
-CONFIG_SOC_GPIO_VALID_DIGITAL_IO_PAD_MASK=0xEF0FEA
-CONFIG_SOC_GPIO_CLOCKOUT_BY_IO_MUX=y
-CONFIG_SOC_I2C_NUM=2
-CONFIG_SOC_I2C_FIFO_LEN=32
-CONFIG_SOC_I2C_CMD_REG_NUM=16
-CONFIG_SOC_I2C_SUPPORT_SLAVE=y
-CONFIG_SOC_I2C_SUPPORT_APB=y
-CONFIG_SOC_I2C_STOP_INDEPENDENT=y
-CONFIG_SOC_I2S_NUM=2
-CONFIG_SOC_I2S_HW_VERSION_1=y
-CONFIG_SOC_I2S_SUPPORTS_APLL=y
-CONFIG_SOC_I2S_SUPPORTS_PLL_F160M=y
-CONFIG_SOC_I2S_SUPPORTS_PDM=y
-CONFIG_SOC_I2S_SUPPORTS_PDM_TX=y
-CONFIG_SOC_I2S_PDM_MAX_TX_LINES=1
-CONFIG_SOC_I2S_SUPPORTS_PDM_RX=y
-CONFIG_SOC_I2S_PDM_MAX_RX_LINES=1
-CONFIG_SOC_I2S_SUPPORTS_ADC_DAC=y
-CONFIG_SOC_I2S_SUPPORTS_ADC=y
-CONFIG_SOC_I2S_SUPPORTS_DAC=y
-CONFIG_SOC_I2S_SUPPORTS_LCD_CAMERA=y
-CONFIG_SOC_I2S_TRANS_SIZE_ALIGN_WORD=y
-CONFIG_SOC_I2S_LCD_I80_VARIANT=y
-CONFIG_SOC_LCD_I80_SUPPORTED=y
-CONFIG_SOC_LCD_I80_BUSES=2
-CONFIG_SOC_LCD_I80_BUS_WIDTH=24
-CONFIG_SOC_LEDC_HAS_TIMER_SPECIFIC_MUX=y
-CONFIG_SOC_LEDC_SUPPORT_APB_CLOCK=y
-CONFIG_SOC_LEDC_SUPPORT_REF_TICK=y
-CONFIG_SOC_LEDC_SUPPORT_HS_MODE=y
-CONFIG_SOC_LEDC_CHANNEL_NUM=8
-CONFIG_SOC_LEDC_TIMER_BIT_WIDTH=20
-CONFIG_SOC_MCPWM_GROUPS=2
-CONFIG_SOC_MCPWM_TIMERS_PER_GROUP=3
-CONFIG_SOC_MCPWM_OPERATORS_PER_GROUP=3
-CONFIG_SOC_MCPWM_COMPARATORS_PER_OPERATOR=2
-CONFIG_SOC_MCPWM_GENERATORS_PER_OPERATOR=2
-CONFIG_SOC_MCPWM_TRIGGERS_PER_OPERATOR=2
-CONFIG_SOC_MCPWM_GPIO_FAULTS_PER_GROUP=3
-CONFIG_SOC_MCPWM_CAPTURE_TIMERS_PER_GROUP=y
-CONFIG_SOC_MCPWM_CAPTURE_CHANNELS_PER_TIMER=3
-CONFIG_SOC_MCPWM_GPIO_SYNCHROS_PER_GROUP=3
-CONFIG_SOC_MMU_PERIPH_NUM=2
-CONFIG_SOC_MMU_LINEAR_ADDRESS_REGION_NUM=3
-CONFIG_SOC_MPU_MIN_REGION_SIZE=0x20000000
-CONFIG_SOC_MPU_REGIONS_MAX_NUM=8
-CONFIG_SOC_PCNT_GROUPS=1
-CONFIG_SOC_PCNT_UNITS_PER_GROUP=8
-CONFIG_SOC_PCNT_CHANNELS_PER_UNIT=2
-CONFIG_SOC_PCNT_THRES_POINT_PER_UNIT=2
-CONFIG_SOC_RMT_GROUPS=1
-CONFIG_SOC_RMT_TX_CANDIDATES_PER_GROUP=8
-CONFIG_SOC_RMT_RX_CANDIDATES_PER_GROUP=8
-CONFIG_SOC_RMT_CHANNELS_PER_GROUP=8
-CONFIG_SOC_RMT_MEM_WORDS_PER_CHANNEL=64
-CONFIG_SOC_RMT_SUPPORT_REF_TICK=y
-CONFIG_SOC_RMT_SUPPORT_APB=y
-CONFIG_SOC_RMT_CHANNEL_CLK_INDEPENDENT=y
-CONFIG_SOC_RTCIO_PIN_COUNT=18
-CONFIG_SOC_RTCIO_INPUT_OUTPUT_SUPPORTED=y
-CONFIG_SOC_RTCIO_HOLD_SUPPORTED=y
-CONFIG_SOC_RTCIO_WAKE_SUPPORTED=y
-CONFIG_SOC_SDM_GROUPS=1
-CONFIG_SOC_SDM_CHANNELS_PER_GROUP=8
-CONFIG_SOC_SDM_CLK_SUPPORT_APB=y
-CONFIG_SOC_SPI_HD_BOTH_INOUT_SUPPORTED=y
-CONFIG_SOC_SPI_AS_CS_SUPPORTED=y
-CONFIG_SOC_SPI_PERIPH_NUM=3
-CONFIG_SOC_SPI_DMA_CHAN_NUM=2
-CONFIG_SOC_SPI_MAX_CS_NUM=3
-CONFIG_SOC_SPI_SUPPORT_CLK_APB=y
-CONFIG_SOC_SPI_MAXIMUM_BUFFER_SIZE=64
-CONFIG_SOC_SPI_MAX_PRE_DIVIDER=8192
-CONFIG_SOC_MEMSPI_SRC_FREQ_80M_SUPPORTED=y
-CONFIG_SOC_MEMSPI_SRC_FREQ_40M_SUPPORTED=y
-CONFIG_SOC_MEMSPI_SRC_FREQ_26M_SUPPORTED=y
-CONFIG_SOC_MEMSPI_SRC_FREQ_20M_SUPPORTED=y
-CONFIG_SOC_TIMER_GROUPS=2
-CONFIG_SOC_TIMER_GROUP_TIMERS_PER_GROUP=2
-CONFIG_SOC_TIMER_GROUP_COUNTER_BIT_WIDTH=64
-CONFIG_SOC_TIMER_GROUP_TOTAL_TIMERS=4
-CONFIG_SOC_TIMER_GROUP_SUPPORT_APB=y
-CONFIG_SOC_TOUCH_VERSION_1=y
-CONFIG_SOC_TOUCH_SENSOR_NUM=10
-CONFIG_SOC_TOUCH_PAD_MEASURE_WAIT_MAX=0xFF
-CONFIG_SOC_TWAI_CONTROLLER_NUM=1
-CONFIG_SOC_TWAI_BRP_MIN=2
-CONFIG_SOC_TWAI_CLK_SUPPORT_APB=y
-CONFIG_SOC_TWAI_SUPPORT_MULTI_ADDRESS_LAYOUT=y
-CONFIG_SOC_UART_NUM=3
-CONFIG_SOC_UART_HP_NUM=3
-CONFIG_SOC_UART_SUPPORT_APB_CLK=y
-CONFIG_SOC_UART_SUPPORT_REF_TICK=y
-CONFIG_SOC_UART_FIFO_LEN=128
-CONFIG_SOC_UART_BITRATE_MAX=5000000
-CONFIG_SOC_SPIRAM_SUPPORTED=y
-CONFIG_SOC_SPI_MEM_SUPPORT_CONFIG_GPIO_BY_EFUSE=y
-CONFIG_SOC_SHA_SUPPORT_PARALLEL_ENG=y
-CONFIG_SOC_SHA_ENDIANNESS_BE=y
-CONFIG_SOC_SHA_SUPPORT_SHA1=y
-CONFIG_SOC_SHA_SUPPORT_SHA256=y
-CONFIG_SOC_SHA_SUPPORT_SHA384=y
-CONFIG_SOC_SHA_SUPPORT_SHA512=y
-CONFIG_SOC_MPI_MEM_BLOCKS_NUM=4
-CONFIG_SOC_MPI_OPERATIONS_NUM=y
-CONFIG_SOC_RSA_MAX_BIT_LEN=4096
-CONFIG_SOC_AES_SUPPORT_AES_128=y
-CONFIG_SOC_AES_SUPPORT_AES_192=y
-CONFIG_SOC_AES_SUPPORT_AES_256=y
-CONFIG_SOC_SECURE_BOOT_V1=y
-CONFIG_SOC_EFUSE_SECURE_BOOT_KEY_DIGESTS=y
-CONFIG_SOC_FLASH_ENCRYPTED_XTS_AES_BLOCK_MAX=32
-CONFIG_SOC_PHY_DIG_REGS_MEM_SIZE=21
-CONFIG_SOC_PM_SUPPORT_EXT0_WAKEUP=y
-CONFIG_SOC_PM_SUPPORT_EXT1_WAKEUP=y
-CONFIG_SOC_PM_SUPPORT_EXT_WAKEUP=y
-CONFIG_SOC_PM_SUPPORT_TOUCH_SENSOR_WAKEUP=y
-CONFIG_SOC_PM_SUPPORT_RTC_PERIPH_PD=y
-CONFIG_SOC_PM_SUPPORT_RTC_FAST_MEM_PD=y
-CONFIG_SOC_PM_SUPPORT_RTC_SLOW_MEM_PD=y
-CONFIG_SOC_PM_SUPPORT_RC_FAST_PD=y
-CONFIG_SOC_PM_SUPPORT_VDDSDIO_PD=y
-CONFIG_SOC_PM_SUPPORT_MODEM_PD=y
-CONFIG_SOC_CONFIGURABLE_VDDSDIO_SUPPORTED=y
-CONFIG_SOC_CLK_APLL_SUPPORTED=y
-CONFIG_SOC_CLK_RC_FAST_D256_SUPPORTED=y
-CONFIG_SOC_RTC_SLOW_CLK_SUPPORT_RC_FAST_D256=y
-CONFIG_SOC_CLK_RC_FAST_SUPPORT_CALIBRATION=y
-CONFIG_SOC_CLK_XTAL32K_SUPPORTED=y
-CONFIG_SOC_SDMMC_USE_IOMUX=y
-CONFIG_SOC_SDMMC_NUM_SLOTS=2
-CONFIG_SOC_WIFI_WAPI_SUPPORT=y
-CONFIG_SOC_WIFI_CSI_SUPPORT=y
-CONFIG_SOC_WIFI_MESH_SUPPORT=y
-CONFIG_SOC_WIFI_SUPPORT_VARIABLE_BEACON_WINDOW=y
-CONFIG_SOC_WIFI_NAN_SUPPORT=y
-CONFIG_SOC_BLE_SUPPORTED=y
-CONFIG_SOC_BLE_MESH_SUPPORTED=y
-CONFIG_SOC_BT_CLASSIC_SUPPORTED=y
-CONFIG_SOC_BLUFI_SUPPORTED=y
-CONFIG_SOC_ULP_HAS_ADC=y
-CONFIG_SOC_PHY_COMBO_MODULE=y
-CONFIG_IDF_CMAKE=y
-CONFIG_IDF_TOOLCHAIN="gcc"
-CONFIG_IDF_TARGET_ARCH_XTENSA=y
-CONFIG_IDF_TARGET_ARCH="xtensa"
-CONFIG_IDF_TARGET="esp32"
-CONFIG_IDF_INIT_VERSION="5.2.1"
-CONFIG_IDF_TARGET_ESP32=y
-CONFIG_IDF_FIRMWARE_CHIP_ID=0x0000
-
-#
-# Build type
-#
-CONFIG_APP_BUILD_TYPE_APP_2NDBOOT=y
-# CONFIG_APP_BUILD_TYPE_RAM is not set
-CONFIG_APP_BUILD_GENERATE_BINARIES=y
-CONFIG_APP_BUILD_BOOTLOADER=y
-CONFIG_APP_BUILD_USE_FLASH_SECTIONS=y
-# CONFIG_APP_REPRODUCIBLE_BUILD is not set
-# CONFIG_APP_NO_BLOBS is not set
-# CONFIG_APP_COMPATIBLE_PRE_V2_1_BOOTLOADERS is not set
-# CONFIG_APP_COMPATIBLE_PRE_V3_1_BOOTLOADERS is not set
-# end of Build type
-
-#
-# Bootloader config
-#
-
-#
-# Bootloader manager
-#
-CONFIG_BOOTLOADER_COMPILE_TIME_DATE=y
-CONFIG_BOOTLOADER_PROJECT_VER=1
-# end of Bootloader manager
-
-CONFIG_BOOTLOADER_OFFSET_IN_FLASH=0x1000
-CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y
-# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_DEBUG is not set
-# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_PERF is not set
-# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_NONE is not set
-# CONFIG_BOOTLOADER_LOG_LEVEL_NONE is not set
-# CONFIG_BOOTLOADER_LOG_LEVEL_ERROR is not set
-# CONFIG_BOOTLOADER_LOG_LEVEL_WARN is not set
-CONFIG_BOOTLOADER_LOG_LEVEL_INFO=y
-# CONFIG_BOOTLOADER_LOG_LEVEL_DEBUG is not set
-# CONFIG_BOOTLOADER_LOG_LEVEL_VERBOSE is not set
-CONFIG_BOOTLOADER_LOG_LEVEL=3
-
-#
-# Serial Flash Configurations
-#
-# CONFIG_BOOTLOADER_FLASH_DC_AWARE is not set
-CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT=y
-# end of Serial Flash Configurations
-
-# CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_8V is not set
-CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V=y
-# CONFIG_BOOTLOADER_FACTORY_RESET is not set
-# CONFIG_BOOTLOADER_APP_TEST is not set
-CONFIG_BOOTLOADER_REGION_PROTECTION_ENABLE=y
-CONFIG_BOOTLOADER_WDT_ENABLE=y
-# CONFIG_BOOTLOADER_WDT_DISABLE_IN_USER_CODE is not set
-CONFIG_BOOTLOADER_WDT_TIME_MS=9000
-# CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE is not set
-# CONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP is not set
-# CONFIG_BOOTLOADER_SKIP_VALIDATE_ON_POWER_ON is not set
-# CONFIG_BOOTLOADER_SKIP_VALIDATE_ALWAYS is not set
-CONFIG_BOOTLOADER_RESERVE_RTC_SIZE=0
-# CONFIG_BOOTLOADER_CUSTOM_RESERVE_RTC is not set
-# end of Bootloader config
-
-#
-# Security features
-#
-CONFIG_SECURE_BOOT_V1_SUPPORTED=y
-# CONFIG_SECURE_SIGNED_APPS_NO_SECURE_BOOT is not set
-# CONFIG_SECURE_BOOT is not set
-# CONFIG_SECURE_FLASH_ENC_ENABLED is not set
-# end of Security features
-
-#
-# Application manager
-#
-CONFIG_APP_COMPILE_TIME_DATE=y
-# CONFIG_APP_EXCLUDE_PROJECT_VER_VAR is not set
-# CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR is not set
-# CONFIG_APP_PROJECT_VER_FROM_CONFIG is not set
-CONFIG_APP_RETRIEVE_LEN_ELF_SHA=9
-# end of Application manager
-
-CONFIG_ESP_ROM_HAS_CRC_LE=y
-CONFIG_ESP_ROM_HAS_CRC_BE=y
-CONFIG_ESP_ROM_HAS_MZ_CRC32=y
-CONFIG_ESP_ROM_HAS_JPEG_DECODE=y
-CONFIG_ESP_ROM_HAS_UART_BUF_SWITCH=y
-CONFIG_ESP_ROM_NEEDS_SWSETUP_WORKAROUND=y
-CONFIG_ESP_ROM_HAS_NEWLIB_NANO_FORMAT=y
-CONFIG_ESP_ROM_HAS_SW_FLOAT=y
-CONFIG_ESP_ROM_USB_SERIAL_DEVICE_NUM=-1
-
-#
-# Serial flasher config
-#
-# CONFIG_ESPTOOLPY_NO_STUB is not set
-# CONFIG_ESPTOOLPY_FLASHMODE_QIO is not set
-# CONFIG_ESPTOOLPY_FLASHMODE_QOUT is not set
-CONFIG_ESPTOOLPY_FLASHMODE_DIO=y
-# CONFIG_ESPTOOLPY_FLASHMODE_DOUT is not set
-CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_STR=y
-CONFIG_ESPTOOLPY_FLASHMODE="dio"
-# CONFIG_ESPTOOLPY_FLASHFREQ_80M is not set
-CONFIG_ESPTOOLPY_FLASHFREQ_40M=y
-# CONFIG_ESPTOOLPY_FLASHFREQ_26M is not set
-# CONFIG_ESPTOOLPY_FLASHFREQ_20M is not set
-CONFIG_ESPTOOLPY_FLASHFREQ="40m"
-# CONFIG_ESPTOOLPY_FLASHSIZE_1MB is not set
-CONFIG_ESPTOOLPY_FLASHSIZE_2MB=y
-# CONFIG_ESPTOOLPY_FLASHSIZE_4MB is not set
-# CONFIG_ESPTOOLPY_FLASHSIZE_8MB is not set
-# CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set
-# CONFIG_ESPTOOLPY_FLASHSIZE_32MB is not set
-# CONFIG_ESPTOOLPY_FLASHSIZE_64MB is not set
-# CONFIG_ESPTOOLPY_FLASHSIZE_128MB is not set
-CONFIG_ESPTOOLPY_FLASHSIZE="2MB"
-# CONFIG_ESPTOOLPY_HEADER_FLASHSIZE_UPDATE is not set
-CONFIG_ESPTOOLPY_BEFORE_RESET=y
-# CONFIG_ESPTOOLPY_BEFORE_NORESET is not set
-CONFIG_ESPTOOLPY_BEFORE="default_reset"
-CONFIG_ESPTOOLPY_AFTER_RESET=y
-# CONFIG_ESPTOOLPY_AFTER_NORESET is not set
-CONFIG_ESPTOOLPY_AFTER="hard_reset"
-CONFIG_ESPTOOLPY_MONITOR_BAUD=115200
-# end of Serial flasher config
-
-#
-# Partition Table
-#
-CONFIG_PARTITION_TABLE_SINGLE_APP=y
-# CONFIG_PARTITION_TABLE_SINGLE_APP_LARGE is not set
-# CONFIG_PARTITION_TABLE_TWO_OTA is not set
-# CONFIG_PARTITION_TABLE_CUSTOM is not set
-CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
-CONFIG_PARTITION_TABLE_FILENAME="partitions_singleapp.csv"
-CONFIG_PARTITION_TABLE_OFFSET=0x8000
-CONFIG_PARTITION_TABLE_MD5=y
-# end of Partition Table
-
-#
-# Compiler options
-#
-CONFIG_COMPILER_OPTIMIZATION_DEBUG=y
-# CONFIG_COMPILER_OPTIMIZATION_SIZE is not set
-# CONFIG_COMPILER_OPTIMIZATION_PERF is not set
-# CONFIG_COMPILER_OPTIMIZATION_NONE is not set
-CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y
-# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT is not set
-# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE is not set
-CONFIG_COMPILER_FLOAT_LIB_FROM_GCCLIB=y
-CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL=2
-# CONFIG_COMPILER_OPTIMIZATION_CHECKS_SILENT is not set
-CONFIG_COMPILER_HIDE_PATHS_MACROS=y
-# CONFIG_COMPILER_CXX_EXCEPTIONS is not set
-# CONFIG_COMPILER_CXX_RTTI is not set
-CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y
-# CONFIG_COMPILER_STACK_CHECK_MODE_NORM is not set
-# CONFIG_COMPILER_STACK_CHECK_MODE_STRONG is not set
-# CONFIG_COMPILER_STACK_CHECK_MODE_ALL is not set
-# CONFIG_COMPILER_WARN_WRITE_STRINGS is not set
-# CONFIG_COMPILER_DISABLE_GCC12_WARNINGS is not set
-# CONFIG_COMPILER_DISABLE_GCC13_WARNINGS is not set
-# CONFIG_COMPILER_DUMP_RTL_FILES is not set
-CONFIG_COMPILER_RT_LIB_GCCLIB=y
-CONFIG_COMPILER_RT_LIB_NAME="gcc"
-# end of Compiler options
-
-#
-# Component config
-#
-
-#
-# Application Level Tracing
-#
-# CONFIG_APPTRACE_DEST_JTAG is not set
-CONFIG_APPTRACE_DEST_NONE=y
-# CONFIG_APPTRACE_DEST_UART1 is not set
-# CONFIG_APPTRACE_DEST_UART2 is not set
-CONFIG_APPTRACE_DEST_UART_NONE=y
-CONFIG_APPTRACE_UART_TASK_PRIO=1
-CONFIG_APPTRACE_LOCK_ENABLE=y
-# end of Application Level Tracing
-
-#
-# Bluetooth
-#
-# CONFIG_BT_ENABLED is not set
-# end of Bluetooth
-
-#
-# Driver Configurations
-#
-
-#
-# Legacy ADC Configuration
-#
-CONFIG_ADC_DISABLE_DAC=y
-# CONFIG_ADC_SUPPRESS_DEPRECATE_WARN is not set
-
-#
-# Legacy ADC Calibration Configuration
-#
-CONFIG_ADC_CAL_EFUSE_TP_ENABLE=y
-CONFIG_ADC_CAL_EFUSE_VREF_ENABLE=y
-CONFIG_ADC_CAL_LUT_ENABLE=y
-# CONFIG_ADC_CALI_SUPPRESS_DEPRECATE_WARN is not set
-# end of Legacy ADC Calibration Configuration
-# end of Legacy ADC Configuration
-
-#
-# SPI Configuration
-#
-# CONFIG_SPI_MASTER_IN_IRAM is not set
-CONFIG_SPI_MASTER_ISR_IN_IRAM=y
-# CONFIG_SPI_SLAVE_IN_IRAM is not set
-CONFIG_SPI_SLAVE_ISR_IN_IRAM=y
-# end of SPI Configuration
-
-#
-# TWAI Configuration
-#
-# CONFIG_TWAI_ISR_IN_IRAM is not set
-CONFIG_TWAI_ERRATA_FIX_BUS_OFF_REC=y
-CONFIG_TWAI_ERRATA_FIX_TX_INTR_LOST=y
-CONFIG_TWAI_ERRATA_FIX_RX_FRAME_INVALID=y
-CONFIG_TWAI_ERRATA_FIX_RX_FIFO_CORRUPT=y
-CONFIG_TWAI_ERRATA_FIX_LISTEN_ONLY_DOM=y
-# end of TWAI Configuration
-
-#
-# UART Configuration
-#
-# CONFIG_UART_ISR_IN_IRAM is not set
-# end of UART Configuration
-
-#
-# GPIO Configuration
-#
-# CONFIG_GPIO_ESP32_SUPPORT_SWITCH_SLP_PULL is not set
-# CONFIG_GPIO_CTRL_FUNC_IN_IRAM is not set
-# end of GPIO Configuration
-
-#
-# Sigma Delta Modulator Configuration
-#
-# CONFIG_SDM_CTRL_FUNC_IN_IRAM is not set
-# CONFIG_SDM_SUPPRESS_DEPRECATE_WARN is not set
-# CONFIG_SDM_ENABLE_DEBUG_LOG is not set
-# end of Sigma Delta Modulator Configuration
-
-#
-# GPTimer Configuration
-#
-CONFIG_GPTIMER_ISR_HANDLER_IN_IRAM=y
-# CONFIG_GPTIMER_CTRL_FUNC_IN_IRAM is not set
-# CONFIG_GPTIMER_ISR_IRAM_SAFE is not set
-# CONFIG_GPTIMER_SUPPRESS_DEPRECATE_WARN is not set
-# CONFIG_GPTIMER_ENABLE_DEBUG_LOG is not set
-# end of GPTimer Configuration
-
-#
-# PCNT Configuration
-#
-# CONFIG_PCNT_CTRL_FUNC_IN_IRAM is not set
-# CONFIG_PCNT_ISR_IRAM_SAFE is not set
-# CONFIG_PCNT_SUPPRESS_DEPRECATE_WARN is not set
-# CONFIG_PCNT_ENABLE_DEBUG_LOG is not set
-# end of PCNT Configuration
-
-#
-# RMT Configuration
-#
-# CONFIG_RMT_ISR_IRAM_SAFE is not set
-# CONFIG_RMT_RECV_FUNC_IN_IRAM is not set
-# CONFIG_RMT_SUPPRESS_DEPRECATE_WARN is not set
-# CONFIG_RMT_ENABLE_DEBUG_LOG is not set
-# end of RMT Configuration
-
-#
-# MCPWM Configuration
-#
-# CONFIG_MCPWM_ISR_IRAM_SAFE is not set
-# CONFIG_MCPWM_CTRL_FUNC_IN_IRAM is not set
-# CONFIG_MCPWM_SUPPRESS_DEPRECATE_WARN is not set
-# CONFIG_MCPWM_ENABLE_DEBUG_LOG is not set
-# end of MCPWM Configuration
-
-#
-# I2S Configuration
-#
-# CONFIG_I2S_ISR_IRAM_SAFE is not set
-# CONFIG_I2S_SUPPRESS_DEPRECATE_WARN is not set
-# CONFIG_I2S_ENABLE_DEBUG_LOG is not set
-# end of I2S Configuration
-
-#
-# DAC Configuration
-#
-# CONFIG_DAC_CTRL_FUNC_IN_IRAM is not set
-# CONFIG_DAC_ISR_IRAM_SAFE is not set
-# CONFIG_DAC_SUPPRESS_DEPRECATE_WARN is not set
-# CONFIG_DAC_ENABLE_DEBUG_LOG is not set
-CONFIG_DAC_DMA_AUTO_16BIT_ALIGN=y
-# end of DAC Configuration
-
-#
-# LEDC Configuration
-#
-# CONFIG_LEDC_CTRL_FUNC_IN_IRAM is not set
-# end of LEDC Configuration
-
-#
-# I2C Configuration
-#
-# CONFIG_I2C_ISR_IRAM_SAFE is not set
-# CONFIG_I2C_ENABLE_DEBUG_LOG is not set
-# end of I2C Configuration
-# end of Driver Configurations
-
-#
-# eFuse Bit Manager
-#
-# CONFIG_EFUSE_CUSTOM_TABLE is not set
-# CONFIG_EFUSE_VIRTUAL is not set
-# CONFIG_EFUSE_CODE_SCHEME_COMPAT_NONE is not set
-CONFIG_EFUSE_CODE_SCHEME_COMPAT_3_4=y
-# CONFIG_EFUSE_CODE_SCHEME_COMPAT_REPEAT is not set
-CONFIG_EFUSE_MAX_BLK_LEN=192
-# end of eFuse Bit Manager
-
-#
-# ESP-TLS
-#
-CONFIG_ESP_TLS_USING_MBEDTLS=y
-# CONFIG_ESP_TLS_USE_SECURE_ELEMENT is not set
-# CONFIG_ESP_TLS_CLIENT_SESSION_TICKETS is not set
-# CONFIG_ESP_TLS_SERVER is not set
-# CONFIG_ESP_TLS_PSK_VERIFICATION is not set
-# CONFIG_ESP_TLS_INSECURE is not set
-# end of ESP-TLS
-
-#
-# ADC and ADC Calibration
-#
-# CONFIG_ADC_ONESHOT_CTRL_FUNC_IN_IRAM is not set
-# CONFIG_ADC_CONTINUOUS_ISR_IRAM_SAFE is not set
-
-#
-# ADC Calibration Configurations
-#
-CONFIG_ADC_CALI_EFUSE_TP_ENABLE=y
-CONFIG_ADC_CALI_EFUSE_VREF_ENABLE=y
-CONFIG_ADC_CALI_LUT_ENABLE=y
-# end of ADC Calibration Configurations
-
-CONFIG_ADC_DISABLE_DAC_OUTPUT=y
-# end of ADC and ADC Calibration
-
-#
-# Wireless Coexistence
-#
-# end of Wireless Coexistence
-
-#
-# Common ESP-related
-#
-CONFIG_ESP_ERR_TO_NAME_LOOKUP=y
-# end of Common ESP-related
-
-#
-# Ethernet
-#
-CONFIG_ETH_ENABLED=y
-CONFIG_ETH_USE_ESP32_EMAC=y
-CONFIG_ETH_PHY_INTERFACE_RMII=y
-CONFIG_ETH_RMII_CLK_INPUT=y
-# CONFIG_ETH_RMII_CLK_OUTPUT is not set
-CONFIG_ETH_RMII_CLK_IN_GPIO=0
-CONFIG_ETH_DMA_BUFFER_SIZE=512
-CONFIG_ETH_DMA_RX_BUFFER_NUM=10
-CONFIG_ETH_DMA_TX_BUFFER_NUM=10
-# CONFIG_ETH_IRAM_OPTIMIZATION is not set
-CONFIG_ETH_USE_SPI_ETHERNET=y
-# CONFIG_ETH_SPI_ETHERNET_DM9051 is not set
-# CONFIG_ETH_SPI_ETHERNET_W5500 is not set
-# CONFIG_ETH_SPI_ETHERNET_KSZ8851SNL is not set
-# CONFIG_ETH_USE_OPENETH is not set
-# CONFIG_ETH_TRANSMIT_MUTEX is not set
-# end of Ethernet
-
-#
-# Event Loop Library
-#
-# CONFIG_ESP_EVENT_LOOP_PROFILING is not set
-CONFIG_ESP_EVENT_POST_FROM_ISR=y
-CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR=y
-# end of Event Loop Library
-
-#
-# GDB Stub
-#
-# CONFIG_ESP_SYSTEM_GDBSTUB_RUNTIME is not set
-# end of GDB Stub
-
-#
-# ESP HTTP client
-#
-CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=y
-# CONFIG_ESP_HTTP_CLIENT_ENABLE_BASIC_AUTH is not set
-# CONFIG_ESP_HTTP_CLIENT_ENABLE_DIGEST_AUTH is not set
-# end of ESP HTTP client
-
-#
-# HTTP Server
-#
-CONFIG_HTTPD_MAX_REQ_HDR_LEN=512
-CONFIG_HTTPD_MAX_URI_LEN=512
-CONFIG_HTTPD_ERR_RESP_NO_DELAY=y
-CONFIG_HTTPD_PURGE_BUF_LEN=32
-# CONFIG_HTTPD_LOG_PURGE_DATA is not set
-# CONFIG_HTTPD_WS_SUPPORT is not set
-# CONFIG_HTTPD_QUEUE_WORK_BLOCKING is not set
-# end of HTTP Server
-
-#
-# ESP HTTPS OTA
-#
-# CONFIG_ESP_HTTPS_OTA_DECRYPT_CB is not set
-# CONFIG_ESP_HTTPS_OTA_ALLOW_HTTP is not set
-# end of ESP HTTPS OTA
-
-#
-# ESP HTTPS server
-#
-# CONFIG_ESP_HTTPS_SERVER_ENABLE is not set
-# end of ESP HTTPS server
-
-#
-# Hardware Settings
-#
-
-#
-# Chip revision
-#
-CONFIG_ESP32_REV_MIN_0=y
-# CONFIG_ESP32_REV_MIN_1 is not set
-# CONFIG_ESP32_REV_MIN_1_1 is not set
-# CONFIG_ESP32_REV_MIN_2 is not set
-# CONFIG_ESP32_REV_MIN_3 is not set
-# CONFIG_ESP32_REV_MIN_3_1 is not set
-CONFIG_ESP32_REV_MIN=0
-CONFIG_ESP32_REV_MIN_FULL=0
-CONFIG_ESP_REV_MIN_FULL=0
-
-#
-# Maximum Supported ESP32 Revision (Rev v3.99)
-#
-CONFIG_ESP32_REV_MAX_FULL=399
-CONFIG_ESP_REV_MAX_FULL=399
-# end of Chip revision
-
-#
-# MAC Config
-#
-CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA=y
-CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP=y
-CONFIG_ESP_MAC_ADDR_UNIVERSE_BT=y
-CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH=y
-CONFIG_ESP_MAC_UNIVERSAL_MAC_ADDRESSES_FOUR=y
-# CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_TWO is not set
-CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_FOUR=y
-CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES=4
-# CONFIG_ESP_MAC_IGNORE_MAC_CRC_ERROR is not set
-# CONFIG_ESP_MAC_USE_CUSTOM_MAC_AS_BASE_MAC is not set
-# end of MAC Config
-
-#
-# Sleep Config
-#
-# CONFIG_ESP_SLEEP_POWER_DOWN_FLASH is not set
-CONFIG_ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND=y
-# CONFIG_ESP_SLEEP_MSPI_NEED_ALL_IO_PU is not set
-CONFIG_ESP_SLEEP_RTC_BUS_ISO_WORKAROUND=y
-# CONFIG_ESP_SLEEP_GPIO_RESET_WORKAROUND is not set
-CONFIG_ESP_SLEEP_WAIT_FLASH_READY_EXTRA_DELAY=2000
-# CONFIG_ESP_SLEEP_CACHE_SAFE_ASSERTION is not set
-# CONFIG_ESP_SLEEP_DEBUG is not set
-CONFIG_ESP_SLEEP_GPIO_ENABLE_INTERNAL_RESISTORS=y
-# end of Sleep Config
-
-#
-# RTC Clock Config
-#
-CONFIG_RTC_CLK_SRC_INT_RC=y
-# CONFIG_RTC_CLK_SRC_EXT_CRYS is not set
-# CONFIG_RTC_CLK_SRC_EXT_OSC is not set
-# CONFIG_RTC_CLK_SRC_INT_8MD256 is not set
-CONFIG_RTC_CLK_CAL_CYCLES=1024
-# end of RTC Clock Config
-
-#
-# Peripheral Control
-#
-CONFIG_PERIPH_CTRL_FUNC_IN_IRAM=y
-# end of Peripheral Control
-
-#
-# Main XTAL Config
-#
-# CONFIG_XTAL_FREQ_26 is not set
-CONFIG_XTAL_FREQ_40=y
-# CONFIG_XTAL_FREQ_AUTO is not set
-CONFIG_XTAL_FREQ=40
-# end of Main XTAL Config
-# end of Hardware Settings
-
-#
-# LCD and Touch Panel
-#
-
-#
-# LCD Touch Drivers are maintained in the IDF Component Registry
-#
-
-#
-# LCD Peripheral Configuration
-#
-CONFIG_LCD_PANEL_IO_FORMAT_BUF_SIZE=32
-# CONFIG_LCD_ENABLE_DEBUG_LOG is not set
-# end of LCD Peripheral Configuration
-# end of LCD and Touch Panel
-
-#
-# ESP NETIF Adapter
-#
-CONFIG_ESP_NETIF_IP_LOST_TIMER_INTERVAL=120
-CONFIG_ESP_NETIF_TCPIP_LWIP=y
-# CONFIG_ESP_NETIF_LOOPBACK is not set
-CONFIG_ESP_NETIF_USES_TCPIP_WITH_BSD_API=y
-# CONFIG_ESP_NETIF_RECEIVE_REPORT_ERRORS is not set
-# CONFIG_ESP_NETIF_L2_TAP is not set
-# CONFIG_ESP_NETIF_BRIDGE_EN is not set
-# end of ESP NETIF Adapter
-
-#
-# Partition API Configuration
-#
-# end of Partition API Configuration
-
-#
-# PHY
-#
-CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE=y
-# CONFIG_ESP_PHY_INIT_DATA_IN_PARTITION is not set
-CONFIG_ESP_PHY_MAX_WIFI_TX_POWER=20
-CONFIG_ESP_PHY_MAX_TX_POWER=20
-# CONFIG_ESP_PHY_REDUCE_TX_POWER is not set
-CONFIG_ESP_PHY_RF_CAL_PARTIAL=y
-# CONFIG_ESP_PHY_RF_CAL_NONE is not set
-# CONFIG_ESP_PHY_RF_CAL_FULL is not set
-CONFIG_ESP_PHY_CALIBRATION_MODE=0
-# end of PHY
-
-#
-# Power Management
-#
-# CONFIG_PM_ENABLE is not set
-# end of Power Management
-
-#
-# ESP PSRAM
-#
-# CONFIG_SPIRAM is not set
-# end of ESP PSRAM
-
-#
-# ESP Ringbuf
-#
-# CONFIG_RINGBUF_PLACE_FUNCTIONS_INTO_FLASH is not set
-# end of ESP Ringbuf
-
-#
-# ESP System Settings
-#
-# CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_80 is not set
-CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_160=y
-# CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_240 is not set
-CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ=160
-
-#
-# Memory
-#
-# CONFIG_ESP32_USE_FIXED_STATIC_RAM_SIZE is not set
-
-#
-# Non-backward compatible options
-#
-# CONFIG_ESP_SYSTEM_ESP32_SRAM1_REGION_AS_IRAM is not set
-# end of Non-backward compatible options
-# end of Memory
-
-#
-# Trace memory
-#
-# CONFIG_ESP32_TRAX is not set
-CONFIG_ESP32_TRACEMEM_RESERVE_DRAM=0x0
-# end of Trace memory
-
-# CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT is not set
-CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT=y
-# CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set
-# CONFIG_ESP_SYSTEM_PANIC_GDBSTUB is not set
-CONFIG_ESP_SYSTEM_PANIC_REBOOT_DELAY_SECONDS=0
-
-#
-# Memory protection
-#
-# end of Memory protection
-
-CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32
-CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=2304
-CONFIG_ESP_MAIN_TASK_STACK_SIZE=3584
-CONFIG_ESP_MAIN_TASK_AFFINITY_CPU0=y
-# CONFIG_ESP_MAIN_TASK_AFFINITY_CPU1 is not set
-# CONFIG_ESP_MAIN_TASK_AFFINITY_NO_AFFINITY is not set
-CONFIG_ESP_MAIN_TASK_AFFINITY=0x0
-CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE=2048
-CONFIG_ESP_CONSOLE_UART_DEFAULT=y
-# CONFIG_ESP_CONSOLE_UART_CUSTOM is not set
-# CONFIG_ESP_CONSOLE_NONE is not set
-CONFIG_ESP_CONSOLE_UART=y
-CONFIG_ESP_CONSOLE_UART_NUM=0
-CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200
-CONFIG_ESP_INT_WDT=y
-CONFIG_ESP_INT_WDT_TIMEOUT_MS=300
-CONFIG_ESP_INT_WDT_CHECK_CPU1=y
-CONFIG_ESP_TASK_WDT_EN=y
-CONFIG_ESP_TASK_WDT_INIT=y
-# CONFIG_ESP_TASK_WDT_PANIC is not set
-CONFIG_ESP_TASK_WDT_TIMEOUT_S=5
-CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
-CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
-# CONFIG_ESP_PANIC_HANDLER_IRAM is not set
-# CONFIG_ESP_DEBUG_STUBS_ENABLE is not set
-CONFIG_ESP_DEBUG_OCDAWARE=y
-# CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_5 is not set
-CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_4=y
-
-#
-# Brownout Detector
-#
-CONFIG_ESP_BROWNOUT_DET=y
-CONFIG_ESP_BROWNOUT_DET_LVL_SEL_0=y
-# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_1 is not set
-# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_2 is not set
-# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_3 is not set
-# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_4 is not set
-# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_5 is not set
-# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_6 is not set
-# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_7 is not set
-CONFIG_ESP_BROWNOUT_DET_LVL=0
-# end of Brownout Detector
-
-# CONFIG_ESP32_DISABLE_BASIC_ROM_CONSOLE is not set
-CONFIG_ESP_SYSTEM_BROWNOUT_INTR=y
-# end of ESP System Settings
-
-#
-# IPC (Inter-Processor Call)
-#
-CONFIG_ESP_IPC_TASK_STACK_SIZE=1024
-CONFIG_ESP_IPC_USES_CALLERS_PRIORITY=y
-CONFIG_ESP_IPC_ISR_ENABLE=y
-# end of IPC (Inter-Processor Call)
-
-#
-# High resolution timer (esp_timer)
-#
-# CONFIG_ESP_TIMER_PROFILING is not set
-CONFIG_ESP_TIME_FUNCS_USE_RTC_TIMER=y
-CONFIG_ESP_TIME_FUNCS_USE_ESP_TIMER=y
-CONFIG_ESP_TIMER_TASK_STACK_SIZE=3584
-CONFIG_ESP_TIMER_INTERRUPT_LEVEL=1
-# CONFIG_ESP_TIMER_SHOW_EXPERIMENTAL is not set
-CONFIG_ESP_TIMER_TASK_AFFINITY=0x0
-CONFIG_ESP_TIMER_TASK_AFFINITY_CPU0=y
-CONFIG_ESP_TIMER_ISR_AFFINITY=0x1
-CONFIG_ESP_TIMER_ISR_AFFINITY_CPU0=y
-# CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD is not set
-CONFIG_ESP_TIMER_IMPL_TG0_LAC=y
-# end of High resolution timer (esp_timer)
-
-#
-# Wi-Fi
-#
-CONFIG_ESP_WIFI_ENABLED=y
-CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM=10
-CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM=32
-# CONFIG_ESP_WIFI_STATIC_TX_BUFFER is not set
-CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER=y
-CONFIG_ESP_WIFI_TX_BUFFER_TYPE=1
-CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER_NUM=32
-CONFIG_ESP_WIFI_STATIC_RX_MGMT_BUFFER=y
-# CONFIG_ESP_WIFI_DYNAMIC_RX_MGMT_BUFFER is not set
-CONFIG_ESP_WIFI_DYNAMIC_RX_MGMT_BUF=0
-CONFIG_ESP_WIFI_RX_MGMT_BUF_NUM_DEF=5
-# CONFIG_ESP_WIFI_CSI_ENABLED is not set
-CONFIG_ESP_WIFI_AMPDU_TX_ENABLED=y
-CONFIG_ESP_WIFI_TX_BA_WIN=6
-CONFIG_ESP_WIFI_AMPDU_RX_ENABLED=y
-CONFIG_ESP_WIFI_RX_BA_WIN=6
-CONFIG_ESP_WIFI_NVS_ENABLED=y
-CONFIG_ESP_WIFI_TASK_PINNED_TO_CORE_0=y
-# CONFIG_ESP_WIFI_TASK_PINNED_TO_CORE_1 is not set
-CONFIG_ESP_WIFI_SOFTAP_BEACON_MAX_LEN=752
-CONFIG_ESP_WIFI_MGMT_SBUF_NUM=32
-CONFIG_ESP_WIFI_IRAM_OPT=y
-# CONFIG_ESP_WIFI_EXTRA_IRAM_OPT is not set
-CONFIG_ESP_WIFI_RX_IRAM_OPT=y
-CONFIG_ESP_WIFI_ENABLE_WPA3_SAE=y
-CONFIG_ESP_WIFI_ENABLE_SAE_PK=y
-CONFIG_ESP_WIFI_SOFTAP_SAE_SUPPORT=y
-CONFIG_ESP_WIFI_ENABLE_WPA3_OWE_STA=y
-# CONFIG_ESP_WIFI_SLP_IRAM_OPT is not set
-CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE=y
-# CONFIG_ESP_WIFI_GMAC_SUPPORT is not set
-CONFIG_ESP_WIFI_SOFTAP_SUPPORT=y
-# CONFIG_ESP_WIFI_SLP_BEACON_LOST_OPT is not set
-CONFIG_ESP_WIFI_ESPNOW_MAX_ENCRYPT_NUM=7
-# CONFIG_ESP_WIFI_NAN_ENABLE is not set
-CONFIG_ESP_WIFI_MBEDTLS_CRYPTO=y
-CONFIG_ESP_WIFI_MBEDTLS_TLS_CLIENT=y
-# CONFIG_ESP_WIFI_WAPI_PSK is not set
-# CONFIG_ESP_WIFI_11KV_SUPPORT is not set
-# CONFIG_ESP_WIFI_MBO_SUPPORT is not set
-# CONFIG_ESP_WIFI_DPP_SUPPORT is not set
-# CONFIG_ESP_WIFI_11R_SUPPORT is not set
-# CONFIG_ESP_WIFI_WPS_SOFTAP_REGISTRAR is not set
-
-#
-# WPS Configuration Options
-#
-# CONFIG_ESP_WIFI_WPS_STRICT is not set
-# CONFIG_ESP_WIFI_WPS_PASSPHRASE is not set
-# end of WPS Configuration Options
-
-# CONFIG_ESP_WIFI_DEBUG_PRINT is not set
-# CONFIG_ESP_WIFI_TESTING_OPTIONS is not set
-CONFIG_ESP_WIFI_ENTERPRISE_SUPPORT=y
-# CONFIG_ESP_WIFI_ENT_FREE_DYNAMIC_BUFFER is not set
-# end of Wi-Fi
-
-#
-# Core dump
-#
-# CONFIG_ESP_COREDUMP_ENABLE_TO_FLASH is not set
-# CONFIG_ESP_COREDUMP_ENABLE_TO_UART is not set
-CONFIG_ESP_COREDUMP_ENABLE_TO_NONE=y
-# end of Core dump
-
-#
-# FAT Filesystem support
-#
-CONFIG_FATFS_VOLUME_COUNT=2
-CONFIG_FATFS_LFN_NONE=y
-# CONFIG_FATFS_LFN_HEAP is not set
-# CONFIG_FATFS_LFN_STACK is not set
-# CONFIG_FATFS_SECTOR_512 is not set
-CONFIG_FATFS_SECTOR_4096=y
-# CONFIG_FATFS_CODEPAGE_DYNAMIC is not set
-CONFIG_FATFS_CODEPAGE_437=y
-# CONFIG_FATFS_CODEPAGE_720 is not set
-# CONFIG_FATFS_CODEPAGE_737 is not set
-# CONFIG_FATFS_CODEPAGE_771 is not set
-# CONFIG_FATFS_CODEPAGE_775 is not set
-# CONFIG_FATFS_CODEPAGE_850 is not set
-# CONFIG_FATFS_CODEPAGE_852 is not set
-# CONFIG_FATFS_CODEPAGE_855 is not set
-# CONFIG_FATFS_CODEPAGE_857 is not set
-# CONFIG_FATFS_CODEPAGE_860 is not set
-# CONFIG_FATFS_CODEPAGE_861 is not set
-# CONFIG_FATFS_CODEPAGE_862 is not set
-# CONFIG_FATFS_CODEPAGE_863 is not set
-# CONFIG_FATFS_CODEPAGE_864 is not set
-# CONFIG_FATFS_CODEPAGE_865 is not set
-# CONFIG_FATFS_CODEPAGE_866 is not set
-# CONFIG_FATFS_CODEPAGE_869 is not set
-# CONFIG_FATFS_CODEPAGE_932 is not set
-# CONFIG_FATFS_CODEPAGE_936 is not set
-# CONFIG_FATFS_CODEPAGE_949 is not set
-# CONFIG_FATFS_CODEPAGE_950 is not set
-CONFIG_FATFS_CODEPAGE=437
-CONFIG_FATFS_FS_LOCK=0
-CONFIG_FATFS_TIMEOUT_MS=10000
-CONFIG_FATFS_PER_FILE_CACHE=y
-# CONFIG_FATFS_USE_FASTSEEK is not set
-CONFIG_FATFS_VFS_FSTAT_BLKSIZE=0
-# CONFIG_FATFS_IMMEDIATE_FSYNC is not set
-# end of FAT Filesystem support
-
-#
-# FreeRTOS
-#
-
-#
-# Kernel
-#
-# CONFIG_FREERTOS_SMP is not set
-# CONFIG_FREERTOS_UNICORE is not set
-CONFIG_FREERTOS_HZ=100
-# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE is not set
-# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_PTRVAL is not set
-CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY=y
-CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=1
-CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=1536
-# CONFIG_FREERTOS_USE_IDLE_HOOK is not set
-# CONFIG_FREERTOS_USE_TICK_HOOK is not set
-CONFIG_FREERTOS_MAX_TASK_NAME_LEN=16
-# CONFIG_FREERTOS_ENABLE_BACKWARD_COMPATIBILITY is not set
-CONFIG_FREERTOS_TIMER_SERVICE_TASK_NAME="Tmr Svc"
-CONFIG_FREERTOS_TIMER_TASK_PRIORITY=1
-CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH=2048
-CONFIG_FREERTOS_TIMER_QUEUE_LENGTH=10
-CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE=0
-CONFIG_FREERTOS_TASK_NOTIFICATION_ARRAY_ENTRIES=1
-# CONFIG_FREERTOS_USE_TRACE_FACILITY is not set
-# CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS is not set
-# end of Kernel
-
-#
-# Port
-#
-CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=y
-# CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK is not set
-CONFIG_FREERTOS_TLSP_DELETION_CALLBACKS=y
-# CONFIG_FREERTOS_TASK_PRE_DELETION_HOOK is not set
-# CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP is not set
-CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER=y
-CONFIG_FREERTOS_ISR_STACKSIZE=1536
-CONFIG_FREERTOS_INTERRUPT_BACKTRACE=y
-# CONFIG_FREERTOS_FPU_IN_ISR is not set
-CONFIG_FREERTOS_TICK_SUPPORT_CORETIMER=y
-CONFIG_FREERTOS_CORETIMER_0=y
-# CONFIG_FREERTOS_CORETIMER_1 is not set
-CONFIG_FREERTOS_SYSTICK_USES_CCOUNT=y
-# CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH is not set
-# CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE is not set
-# end of Port
-
-CONFIG_FREERTOS_PORT=y
-CONFIG_FREERTOS_NO_AFFINITY=0x7FFFFFFF
-CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y
-CONFIG_FREERTOS_DEBUG_OCDAWARE=y
-CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT=y
-CONFIG_FREERTOS_PLACE_SNAPSHOT_FUNS_INTO_FLASH=y
-# end of FreeRTOS
-
-#
-# Hardware Abstraction Layer (HAL) and Low Level (LL)
-#
-CONFIG_HAL_ASSERTION_EQUALS_SYSTEM=y
-# CONFIG_HAL_ASSERTION_DISABLE is not set
-# CONFIG_HAL_ASSERTION_SILENT is not set
-# CONFIG_HAL_ASSERTION_ENABLE is not set
-CONFIG_HAL_DEFAULT_ASSERTION_LEVEL=2
-CONFIG_HAL_SPI_MASTER_FUNC_IN_IRAM=y
-CONFIG_HAL_SPI_SLAVE_FUNC_IN_IRAM=y
-# end of Hardware Abstraction Layer (HAL) and Low Level (LL)
-
-#
-# Heap memory debugging
-#
-CONFIG_HEAP_POISONING_DISABLED=y
-# CONFIG_HEAP_POISONING_LIGHT is not set
-# CONFIG_HEAP_POISONING_COMPREHENSIVE is not set
-CONFIG_HEAP_TRACING_OFF=y
-# CONFIG_HEAP_TRACING_STANDALONE is not set
-# CONFIG_HEAP_TRACING_TOHOST is not set
-# CONFIG_HEAP_USE_HOOKS is not set
-# CONFIG_HEAP_TASK_TRACKING is not set
-# CONFIG_HEAP_ABORT_WHEN_ALLOCATION_FAILS is not set
-# CONFIG_HEAP_PLACE_FUNCTION_INTO_FLASH is not set
-# end of Heap memory debugging
-
-#
-# Log output
-#
-# CONFIG_LOG_DEFAULT_LEVEL_NONE is not set
-# CONFIG_LOG_DEFAULT_LEVEL_ERROR is not set
-# CONFIG_LOG_DEFAULT_LEVEL_WARN is not set
-CONFIG_LOG_DEFAULT_LEVEL_INFO=y
-# CONFIG_LOG_DEFAULT_LEVEL_DEBUG is not set
-# CONFIG_LOG_DEFAULT_LEVEL_VERBOSE is not set
-CONFIG_LOG_DEFAULT_LEVEL=3
-CONFIG_LOG_MAXIMUM_EQUALS_DEFAULT=y
-# CONFIG_LOG_MAXIMUM_LEVEL_DEBUG is not set
-# CONFIG_LOG_MAXIMUM_LEVEL_VERBOSE is not set
-CONFIG_LOG_MAXIMUM_LEVEL=3
-# CONFIG_LOG_MASTER_LEVEL is not set
-CONFIG_LOG_COLORS=y
-CONFIG_LOG_TIMESTAMP_SOURCE_RTOS=y
-# CONFIG_LOG_TIMESTAMP_SOURCE_SYSTEM is not set
-# end of Log output
-
-#
-# LWIP
-#
-CONFIG_LWIP_ENABLE=y
-CONFIG_LWIP_LOCAL_HOSTNAME="espressif"
-# CONFIG_LWIP_NETIF_API is not set
-CONFIG_LWIP_TCPIP_TASK_PRIO=18
-# CONFIG_LWIP_TCPIP_CORE_LOCKING is not set
-# CONFIG_LWIP_CHECK_THREAD_SAFETY is not set
-CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES=y
-# CONFIG_LWIP_L2_TO_L3_COPY is not set
-# CONFIG_LWIP_IRAM_OPTIMIZATION is not set
-# CONFIG_LWIP_EXTRA_IRAM_OPTIMIZATION is not set
-CONFIG_LWIP_TIMERS_ONDEMAND=y
-CONFIG_LWIP_ND6=y
-# CONFIG_LWIP_FORCE_ROUTER_FORWARDING is not set
-CONFIG_LWIP_MAX_SOCKETS=10
-# CONFIG_LWIP_USE_ONLY_LWIP_SELECT is not set
-# CONFIG_LWIP_SO_LINGER is not set
-CONFIG_LWIP_SO_REUSE=y
-CONFIG_LWIP_SO_REUSE_RXTOALL=y
-# CONFIG_LWIP_SO_RCVBUF is not set
-# CONFIG_LWIP_NETBUF_RECVINFO is not set
-CONFIG_LWIP_IP_DEFAULT_TTL=64
-CONFIG_LWIP_IP4_FRAG=y
-CONFIG_LWIP_IP6_FRAG=y
-# CONFIG_LWIP_IP4_REASSEMBLY is not set
-# CONFIG_LWIP_IP6_REASSEMBLY is not set
-CONFIG_LWIP_IP_REASS_MAX_PBUFS=10
-# CONFIG_LWIP_IP_FORWARD is not set
-# CONFIG_LWIP_STATS is not set
-CONFIG_LWIP_ESP_GRATUITOUS_ARP=y
-CONFIG_LWIP_GARP_TMR_INTERVAL=60
-CONFIG_LWIP_ESP_MLDV6_REPORT=y
-CONFIG_LWIP_MLDV6_TMR_INTERVAL=40
-CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=32
-CONFIG_LWIP_DHCP_DOES_ARP_CHECK=y
-# CONFIG_LWIP_DHCP_DISABLE_CLIENT_ID is not set
-CONFIG_LWIP_DHCP_DISABLE_VENDOR_CLASS_ID=y
-# CONFIG_LWIP_DHCP_RESTORE_LAST_IP is not set
-CONFIG_LWIP_DHCP_OPTIONS_LEN=68
-CONFIG_LWIP_NUM_NETIF_CLIENT_DATA=0
-CONFIG_LWIP_DHCP_COARSE_TIMER_SECS=1
-
-#
-# DHCP server
-#
-CONFIG_LWIP_DHCPS=y
-CONFIG_LWIP_DHCPS_LEASE_UNIT=60
-CONFIG_LWIP_DHCPS_MAX_STATION_NUM=8
-CONFIG_LWIP_DHCPS_STATIC_ENTRIES=y
-# end of DHCP server
-
-# CONFIG_LWIP_AUTOIP is not set
-CONFIG_LWIP_IPV4=y
-CONFIG_LWIP_IPV6=y
-# CONFIG_LWIP_IPV6_AUTOCONFIG is not set
-CONFIG_LWIP_IPV6_NUM_ADDRESSES=3
-# CONFIG_LWIP_IPV6_FORWARD is not set
-# CONFIG_LWIP_NETIF_STATUS_CALLBACK is not set
-CONFIG_LWIP_NETIF_LOOPBACK=y
-CONFIG_LWIP_LOOPBACK_MAX_PBUFS=8
-
-#
-# TCP
-#
-CONFIG_LWIP_MAX_ACTIVE_TCP=16
-CONFIG_LWIP_MAX_LISTENING_TCP=16
-CONFIG_LWIP_TCP_HIGH_SPEED_RETRANSMISSION=y
-CONFIG_LWIP_TCP_MAXRTX=12
-CONFIG_LWIP_TCP_SYNMAXRTX=12
-CONFIG_LWIP_TCP_MSS=1440
-CONFIG_LWIP_TCP_TMR_INTERVAL=250
-CONFIG_LWIP_TCP_MSL=60000
-CONFIG_LWIP_TCP_FIN_WAIT_TIMEOUT=20000
-CONFIG_LWIP_TCP_SND_BUF_DEFAULT=5760
-CONFIG_LWIP_TCP_WND_DEFAULT=5760
-CONFIG_LWIP_TCP_RECVMBOX_SIZE=6
-CONFIG_LWIP_TCP_QUEUE_OOSEQ=y
-CONFIG_LWIP_TCP_OOSEQ_TIMEOUT=6
-CONFIG_LWIP_TCP_OOSEQ_MAX_PBUFS=4
-# CONFIG_LWIP_TCP_SACK_OUT is not set
-CONFIG_LWIP_TCP_OVERSIZE_MSS=y
-# CONFIG_LWIP_TCP_OVERSIZE_QUARTER_MSS is not set
-# CONFIG_LWIP_TCP_OVERSIZE_DISABLE is not set
-CONFIG_LWIP_TCP_RTO_TIME=1500
-# end of TCP
-
-#
-# UDP
-#
-CONFIG_LWIP_MAX_UDP_PCBS=16
-CONFIG_LWIP_UDP_RECVMBOX_SIZE=6
-# end of UDP
-
-#
-# Checksums
-#
-# CONFIG_LWIP_CHECKSUM_CHECK_IP is not set
-# CONFIG_LWIP_CHECKSUM_CHECK_UDP is not set
-CONFIG_LWIP_CHECKSUM_CHECK_ICMP=y
-# end of Checksums
-
-CONFIG_LWIP_TCPIP_TASK_STACK_SIZE=3072
-CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
-# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU0 is not set
-# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU1 is not set
-CONFIG_LWIP_TCPIP_TASK_AFFINITY=0x7FFFFFFF
-# CONFIG_LWIP_PPP_SUPPORT is not set
-CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE=3
-CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS=5
-# CONFIG_LWIP_SLIP_SUPPORT is not set
-
-#
-# ICMP
-#
-CONFIG_LWIP_ICMP=y
-# CONFIG_LWIP_MULTICAST_PING is not set
-# CONFIG_LWIP_BROADCAST_PING is not set
-# end of ICMP
-
-#
-# LWIP RAW API
-#
-CONFIG_LWIP_MAX_RAW_PCBS=16
-# end of LWIP RAW API
-
-#
-# SNTP
-#
-CONFIG_LWIP_SNTP_MAX_SERVERS=1
-# CONFIG_LWIP_DHCP_GET_NTP_SRV is not set
-CONFIG_LWIP_SNTP_UPDATE_DELAY=3600000
-# end of SNTP
-
-#
-# DNS
-#
-CONFIG_LWIP_DNS_MAX_SERVERS=3
-# CONFIG_LWIP_FALLBACK_DNS_SERVER_SUPPORT is not set
-# end of DNS
-
-CONFIG_LWIP_BRIDGEIF_MAX_PORTS=7
-CONFIG_LWIP_ESP_LWIP_ASSERT=y
-
-#
-# Hooks
-#
-# CONFIG_LWIP_HOOK_TCP_ISN_NONE is not set
-CONFIG_LWIP_HOOK_TCP_ISN_DEFAULT=y
-# CONFIG_LWIP_HOOK_TCP_ISN_CUSTOM is not set
-CONFIG_LWIP_HOOK_IP6_ROUTE_NONE=y
-# CONFIG_LWIP_HOOK_IP6_ROUTE_DEFAULT is not set
-# CONFIG_LWIP_HOOK_IP6_ROUTE_CUSTOM is not set
-CONFIG_LWIP_HOOK_ND6_GET_GW_NONE=y
-# CONFIG_LWIP_HOOK_ND6_GET_GW_DEFAULT is not set
-# CONFIG_LWIP_HOOK_ND6_GET_GW_CUSTOM is not set
-CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_NONE=y
-# CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_DEFAULT is not set
-# CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_CUSTOM is not set
-CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE=y
-# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_DEFAULT is not set
-# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_CUSTOM is not set
-CONFIG_LWIP_HOOK_IP6_INPUT_NONE=y
-# CONFIG_LWIP_HOOK_IP6_INPUT_DEFAULT is not set
-# CONFIG_LWIP_HOOK_IP6_INPUT_CUSTOM is not set
-# end of Hooks
-
-# CONFIG_LWIP_DEBUG is not set
-# end of LWIP
-
-#
-# mbedTLS
-#
-CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
-# CONFIG_MBEDTLS_DEFAULT_MEM_ALLOC is not set
-# CONFIG_MBEDTLS_CUSTOM_MEM_ALLOC is not set
-CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=y
-CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
-CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
-# CONFIG_MBEDTLS_DYNAMIC_BUFFER is not set
-# CONFIG_MBEDTLS_DEBUG is not set
-
-#
-# mbedTLS v3.x related
-#
-# CONFIG_MBEDTLS_SSL_PROTO_TLS1_3 is not set
-# CONFIG_MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH is not set
-# CONFIG_MBEDTLS_X509_TRUSTED_CERT_CALLBACK is not set
-# CONFIG_MBEDTLS_SSL_CONTEXT_SERIALIZATION is not set
-CONFIG_MBEDTLS_SSL_KEEP_PEER_CERTIFICATE=y
-CONFIG_MBEDTLS_PKCS7_C=y
-# end of mbedTLS v3.x related
-
-#
-# Certificate Bundle
-#
-CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y
-CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL=y
-# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_CMN is not set
-# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_NONE is not set
-# CONFIG_MBEDTLS_CUSTOM_CERTIFICATE_BUNDLE is not set
-CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_MAX_CERTS=200
-# end of Certificate Bundle
-
-# CONFIG_MBEDTLS_ECP_RESTARTABLE is not set
-CONFIG_MBEDTLS_CMAC_C=y
-CONFIG_MBEDTLS_HARDWARE_AES=y
-CONFIG_MBEDTLS_HARDWARE_MPI=y
-CONFIG_MBEDTLS_HARDWARE_SHA=y
-CONFIG_MBEDTLS_ROM_MD5=y
-# CONFIG_MBEDTLS_ATCA_HW_ECDSA_SIGN is not set
-# CONFIG_MBEDTLS_ATCA_HW_ECDSA_VERIFY is not set
-CONFIG_MBEDTLS_HAVE_TIME=y
-# CONFIG_MBEDTLS_PLATFORM_TIME_ALT is not set
-# CONFIG_MBEDTLS_HAVE_TIME_DATE is not set
-CONFIG_MBEDTLS_ECDSA_DETERMINISTIC=y
-CONFIG_MBEDTLS_SHA512_C=y
-CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=y
-# CONFIG_MBEDTLS_TLS_SERVER_ONLY is not set
-# CONFIG_MBEDTLS_TLS_CLIENT_ONLY is not set
-# CONFIG_MBEDTLS_TLS_DISABLED is not set
-CONFIG_MBEDTLS_TLS_SERVER=y
-CONFIG_MBEDTLS_TLS_CLIENT=y
-CONFIG_MBEDTLS_TLS_ENABLED=y
-
-#
-# TLS Key Exchange Methods
-#
-# CONFIG_MBEDTLS_PSK_MODES is not set
-CONFIG_MBEDTLS_KEY_EXCHANGE_RSA=y
-CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE=y
-CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA=y
-CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA=y
-CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA=y
-CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA=y
-# end of TLS Key Exchange Methods
-
-CONFIG_MBEDTLS_SSL_RENEGOTIATION=y
-CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=y
-# CONFIG_MBEDTLS_SSL_PROTO_GMTSSL1_1 is not set
-# CONFIG_MBEDTLS_SSL_PROTO_DTLS is not set
-CONFIG_MBEDTLS_SSL_ALPN=y
-CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS=y
-CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS=y
-
-#
-# Symmetric Ciphers
-#
-CONFIG_MBEDTLS_AES_C=y
-# CONFIG_MBEDTLS_CAMELLIA_C is not set
-# CONFIG_MBEDTLS_DES_C is not set
-# CONFIG_MBEDTLS_BLOWFISH_C is not set
-# CONFIG_MBEDTLS_XTEA_C is not set
-CONFIG_MBEDTLS_CCM_C=y
-CONFIG_MBEDTLS_GCM_C=y
-# CONFIG_MBEDTLS_NIST_KW_C is not set
-# end of Symmetric Ciphers
-
-# CONFIG_MBEDTLS_RIPEMD160_C is not set
-
-#
-# Certificates
-#
-CONFIG_MBEDTLS_PEM_PARSE_C=y
-CONFIG_MBEDTLS_PEM_WRITE_C=y
-CONFIG_MBEDTLS_X509_CRL_PARSE_C=y
-CONFIG_MBEDTLS_X509_CSR_PARSE_C=y
-# end of Certificates
-
-CONFIG_MBEDTLS_ECP_C=y
-# CONFIG_MBEDTLS_DHM_C is not set
-CONFIG_MBEDTLS_ECDH_C=y
-CONFIG_MBEDTLS_ECDSA_C=y
-# CONFIG_MBEDTLS_ECJPAKE_C is not set
-CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED=y
-CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED=y
-CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED=y
-CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED=y
-CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED=y
-CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED=y
-CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED=y
-CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED=y
-CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED=y
-CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED=y
-CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED=y
-CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED=y
-CONFIG_MBEDTLS_ECP_NIST_OPTIM=y
-CONFIG_MBEDTLS_ECP_FIXED_POINT_OPTIM=y
-# CONFIG_MBEDTLS_POLY1305_C is not set
-# CONFIG_MBEDTLS_CHACHA20_C is not set
-# CONFIG_MBEDTLS_HKDF_C is not set
-# CONFIG_MBEDTLS_THREADING_C is not set
-# CONFIG_MBEDTLS_LARGE_KEY_SOFTWARE_MPI is not set
-# end of mbedTLS
-
-#
-# ESP-MQTT Configurations
-#
-CONFIG_MQTT_PROTOCOL_311=y
-# CONFIG_MQTT_PROTOCOL_5 is not set
-CONFIG_MQTT_TRANSPORT_SSL=y
-CONFIG_MQTT_TRANSPORT_WEBSOCKET=y
-CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE=y
-# CONFIG_MQTT_MSG_ID_INCREMENTAL is not set
-# CONFIG_MQTT_SKIP_PUBLISH_IF_DISCONNECTED is not set
-# CONFIG_MQTT_REPORT_DELETED_MESSAGES is not set
-# CONFIG_MQTT_USE_CUSTOM_CONFIG is not set
-# CONFIG_MQTT_TASK_CORE_SELECTION_ENABLED is not set
-# CONFIG_MQTT_CUSTOM_OUTBOX is not set
-# end of ESP-MQTT Configurations
-
-#
-# Newlib
-#
-CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF=y
-# CONFIG_NEWLIB_STDOUT_LINE_ENDING_LF is not set
-# CONFIG_NEWLIB_STDOUT_LINE_ENDING_CR is not set
-# CONFIG_NEWLIB_STDIN_LINE_ENDING_CRLF is not set
-# CONFIG_NEWLIB_STDIN_LINE_ENDING_LF is not set
-CONFIG_NEWLIB_STDIN_LINE_ENDING_CR=y
-# CONFIG_NEWLIB_NANO_FORMAT is not set
-CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC_HRT=y
-# CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC is not set
-# CONFIG_NEWLIB_TIME_SYSCALL_USE_HRT is not set
-# CONFIG_NEWLIB_TIME_SYSCALL_USE_NONE is not set
-# end of Newlib
-
-#
-# NVS
-#
-# CONFIG_NVS_ASSERT_ERROR_CHECK is not set
-# CONFIG_NVS_LEGACY_DUP_KEYS_COMPATIBILITY is not set
-# end of NVS
-
-#
-# OpenThread
-#
-# CONFIG_OPENTHREAD_ENABLED is not set
-
-#
-# Thread Operational Dataset
-#
-CONFIG_OPENTHREAD_NETWORK_NAME="OpenThread-ESP"
-CONFIG_OPENTHREAD_MESH_LOCAL_PREFIX="fd00:db8:a0:0::/64"
-CONFIG_OPENTHREAD_NETWORK_CHANNEL=15
-CONFIG_OPENTHREAD_NETWORK_PANID=0x1234
-CONFIG_OPENTHREAD_NETWORK_EXTPANID="dead00beef00cafe"
-CONFIG_OPENTHREAD_NETWORK_MASTERKEY="00112233445566778899aabbccddeeff"
-CONFIG_OPENTHREAD_NETWORK_PSKC="104810e2315100afd6bc9215a6bfac53"
-# end of Thread Operational Dataset
-
-CONFIG_OPENTHREAD_XTAL_ACCURACY=130
-# CONFIG_OPENTHREAD_SPINEL_ONLY is not set
-CONFIG_OPENTHREAD_RX_ON_WHEN_IDLE=y
-
-#
-# Thread Address Query Config
-#
-# end of Thread Address Query Config
-# end of OpenThread
-
-#
-# Protocomm
-#
-CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_0=y
-CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_1=y
-CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_2=y
-# end of Protocomm
-
-#
-# PThreads
-#
-CONFIG_PTHREAD_TASK_PRIO_DEFAULT=5
-CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072
-CONFIG_PTHREAD_STACK_MIN=768
-CONFIG_PTHREAD_DEFAULT_CORE_NO_AFFINITY=y
-# CONFIG_PTHREAD_DEFAULT_CORE_0 is not set
-# CONFIG_PTHREAD_DEFAULT_CORE_1 is not set
-CONFIG_PTHREAD_TASK_CORE_DEFAULT=-1
-CONFIG_PTHREAD_TASK_NAME_DEFAULT="pthread"
-# end of PThreads
-
-#
-# MMU Config
-#
-CONFIG_MMU_PAGE_SIZE_64KB=y
-CONFIG_MMU_PAGE_MODE="64KB"
-CONFIG_MMU_PAGE_SIZE=0x10000
-# end of MMU Config
-
-#
-# Main Flash configuration
-#
-
-#
-# SPI Flash behavior when brownout
-#
-CONFIG_SPI_FLASH_BROWNOUT_RESET_XMC=y
-CONFIG_SPI_FLASH_BROWNOUT_RESET=y
-# end of SPI Flash behavior when brownout
-
-#
-# Optional and Experimental Features (READ DOCS FIRST)
-#
-
-#
-# Features here require specific hardware (READ DOCS FIRST!)
-#
-# end of Optional and Experimental Features (READ DOCS FIRST)
-# end of Main Flash configuration
-
-#
-# SPI Flash driver
-#
-# CONFIG_SPI_FLASH_VERIFY_WRITE is not set
-# CONFIG_SPI_FLASH_ENABLE_COUNTERS is not set
-CONFIG_SPI_FLASH_ROM_DRIVER_PATCH=y
-CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS=y
-# CONFIG_SPI_FLASH_DANGEROUS_WRITE_FAILS is not set
-# CONFIG_SPI_FLASH_DANGEROUS_WRITE_ALLOWED is not set
-# CONFIG_SPI_FLASH_SHARE_SPI1_BUS is not set
-# CONFIG_SPI_FLASH_BYPASS_BLOCK_ERASE is not set
-CONFIG_SPI_FLASH_YIELD_DURING_ERASE=y
-CONFIG_SPI_FLASH_ERASE_YIELD_DURATION_MS=20
-CONFIG_SPI_FLASH_ERASE_YIELD_TICKS=1
-CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE=8192
-# CONFIG_SPI_FLASH_SIZE_OVERRIDE is not set
-# CONFIG_SPI_FLASH_CHECK_ERASE_TIMEOUT_DISABLED is not set
-# CONFIG_SPI_FLASH_OVERRIDE_CHIP_DRIVER_LIST is not set
-
-#
-# Auto-detect flash chips
-#
-CONFIG_SPI_FLASH_VENDOR_XMC_SUPPORTED=y
-CONFIG_SPI_FLASH_VENDOR_GD_SUPPORTED=y
-CONFIG_SPI_FLASH_VENDOR_ISSI_SUPPORTED=y
-CONFIG_SPI_FLASH_VENDOR_MXIC_SUPPORTED=y
-CONFIG_SPI_FLASH_VENDOR_WINBOND_SUPPORTED=y
-CONFIG_SPI_FLASH_SUPPORT_ISSI_CHIP=y
-CONFIG_SPI_FLASH_SUPPORT_MXIC_CHIP=y
-CONFIG_SPI_FLASH_SUPPORT_GD_CHIP=y
-CONFIG_SPI_FLASH_SUPPORT_WINBOND_CHIP=y
-# CONFIG_SPI_FLASH_SUPPORT_BOYA_CHIP is not set
-# CONFIG_SPI_FLASH_SUPPORT_TH_CHIP is not set
-# end of Auto-detect flash chips
-
-CONFIG_SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE=y
-# end of SPI Flash driver
-
-#
-# SPIFFS Configuration
-#
-CONFIG_SPIFFS_MAX_PARTITIONS=3
-
-#
-# SPIFFS Cache Configuration
-#
-CONFIG_SPIFFS_CACHE=y
-CONFIG_SPIFFS_CACHE_WR=y
-# CONFIG_SPIFFS_CACHE_STATS is not set
-# end of SPIFFS Cache Configuration
-
-CONFIG_SPIFFS_PAGE_CHECK=y
-CONFIG_SPIFFS_GC_MAX_RUNS=10
-# CONFIG_SPIFFS_GC_STATS is not set
-CONFIG_SPIFFS_PAGE_SIZE=256
-CONFIG_SPIFFS_OBJ_NAME_LEN=32
-# CONFIG_SPIFFS_FOLLOW_SYMLINKS is not set
-CONFIG_SPIFFS_USE_MAGIC=y
-CONFIG_SPIFFS_USE_MAGIC_LENGTH=y
-CONFIG_SPIFFS_META_LENGTH=4
-CONFIG_SPIFFS_USE_MTIME=y
-
-#
-# Debug Configuration
-#
-# CONFIG_SPIFFS_DBG is not set
-# CONFIG_SPIFFS_API_DBG is not set
-# CONFIG_SPIFFS_GC_DBG is not set
-# CONFIG_SPIFFS_CACHE_DBG is not set
-# CONFIG_SPIFFS_CHECK_DBG is not set
-# CONFIG_SPIFFS_TEST_VISUALISATION is not set
-# end of Debug Configuration
-# end of SPIFFS Configuration
-
-#
-# TCP Transport
-#
-
-#
-# Websocket
-#
-CONFIG_WS_TRANSPORT=y
-CONFIG_WS_BUFFER_SIZE=1024
-# CONFIG_WS_DYNAMIC_BUFFER is not set
-# end of Websocket
-# end of TCP Transport
-
-#
-# Ultra Low Power (ULP) Co-processor
-#
-# CONFIG_ULP_COPROC_ENABLED is not set
-# end of Ultra Low Power (ULP) Co-processor
-
-#
-# Unity unit testing library
-#
-CONFIG_UNITY_ENABLE_FLOAT=y
-CONFIG_UNITY_ENABLE_DOUBLE=y
-# CONFIG_UNITY_ENABLE_64BIT is not set
-# CONFIG_UNITY_ENABLE_COLOR is not set
-CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER=y
-# CONFIG_UNITY_ENABLE_FIXTURE is not set
-# CONFIG_UNITY_ENABLE_BACKTRACE_ON_FAIL is not set
-# end of Unity unit testing library
-
-#
-# Virtual file system
-#
-CONFIG_VFS_SUPPORT_IO=y
-CONFIG_VFS_SUPPORT_DIR=y
-CONFIG_VFS_SUPPORT_SELECT=y
-CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT=y
-# CONFIG_VFS_SELECT_IN_RAM is not set
-CONFIG_VFS_SUPPORT_TERMIOS=y
-CONFIG_VFS_MAX_COUNT=8
-
-#
-# Host File System I/O (Semihosting)
-#
-CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS=1
-# end of Host File System I/O (Semihosting)
-# end of Virtual file system
-
-#
-# Wear Levelling
-#
-# CONFIG_WL_SECTOR_SIZE_512 is not set
-CONFIG_WL_SECTOR_SIZE_4096=y
-CONFIG_WL_SECTOR_SIZE=4096
-# end of Wear Levelling
-
-#
-# Wi-Fi Provisioning Manager
-#
-CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES=16
-CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30
-# CONFIG_WIFI_PROV_BLE_FORCE_ENCRYPTION is not set
-CONFIG_WIFI_PROV_STA_ALL_CHANNEL_SCAN=y
-# CONFIG_WIFI_PROV_STA_FAST_SCAN is not set
-# end of Wi-Fi Provisioning Manager
-# end of Component config
-
-# CONFIG_IDF_EXPERIMENTAL_FEATURES is not set
-
-# Deprecated options for backward compatibility
-# CONFIG_APP_BUILD_TYPE_ELF_RAM is not set
-# CONFIG_NO_BLOBS is not set
-# CONFIG_ESP32_NO_BLOBS is not set
-# CONFIG_ESP32_COMPATIBLE_PRE_V2_1_BOOTLOADERS is not set
-# CONFIG_ESP32_COMPATIBLE_PRE_V3_1_BOOTLOADERS is not set
-# CONFIG_LOG_BOOTLOADER_LEVEL_NONE is not set
-# CONFIG_LOG_BOOTLOADER_LEVEL_ERROR is not set
-# CONFIG_LOG_BOOTLOADER_LEVEL_WARN is not set
-CONFIG_LOG_BOOTLOADER_LEVEL_INFO=y
-# CONFIG_LOG_BOOTLOADER_LEVEL_DEBUG is not set
-# CONFIG_LOG_BOOTLOADER_LEVEL_VERBOSE is not set
-CONFIG_LOG_BOOTLOADER_LEVEL=3
-# CONFIG_APP_ROLLBACK_ENABLE is not set
-# CONFIG_FLASH_ENCRYPTION_ENABLED is not set
-# CONFIG_FLASHMODE_QIO is not set
-# CONFIG_FLASHMODE_QOUT is not set
-CONFIG_FLASHMODE_DIO=y
-# CONFIG_FLASHMODE_DOUT is not set
-CONFIG_MONITOR_BAUD=115200
-CONFIG_OPTIMIZATION_LEVEL_DEBUG=y
-CONFIG_COMPILER_OPTIMIZATION_LEVEL_DEBUG=y
-CONFIG_COMPILER_OPTIMIZATION_DEFAULT=y
-# CONFIG_OPTIMIZATION_LEVEL_RELEASE is not set
-# CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE is not set
-CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=y
-# CONFIG_OPTIMIZATION_ASSERTIONS_SILENT is not set
-# CONFIG_OPTIMIZATION_ASSERTIONS_DISABLED is not set
-CONFIG_OPTIMIZATION_ASSERTION_LEVEL=2
-# CONFIG_CXX_EXCEPTIONS is not set
-CONFIG_STACK_CHECK_NONE=y
-# CONFIG_STACK_CHECK_NORM is not set
-# CONFIG_STACK_CHECK_STRONG is not set
-# CONFIG_STACK_CHECK_ALL is not set
-# CONFIG_WARN_WRITE_STRINGS is not set
-# CONFIG_ESP32_APPTRACE_DEST_TRAX is not set
-CONFIG_ESP32_APPTRACE_DEST_NONE=y
-CONFIG_ESP32_APPTRACE_LOCK_ENABLE=y
-CONFIG_ADC2_DISABLE_DAC=y
-# CONFIG_MCPWM_ISR_IN_IRAM is not set
-# CONFIG_EVENT_LOOP_PROFILING is not set
-CONFIG_POST_EVENTS_FROM_ISR=y
-CONFIG_POST_EVENTS_FROM_IRAM_ISR=y
-# CONFIG_OTA_ALLOW_HTTP is not set
-# CONFIG_TWO_UNIVERSAL_MAC_ADDRESS is not set
-CONFIG_FOUR_UNIVERSAL_MAC_ADDRESS=y
-CONFIG_NUMBER_OF_UNIVERSAL_MAC_ADDRESS=4
-# CONFIG_ESP_SYSTEM_PD_FLASH is not set
-CONFIG_ESP32_DEEP_SLEEP_WAKEUP_DELAY=2000
-CONFIG_ESP_SLEEP_DEEP_SLEEP_WAKEUP_DELAY=2000
-CONFIG_ESP32_RTC_CLK_SRC_INT_RC=y
-CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC=y
-# CONFIG_ESP32_RTC_CLK_SRC_EXT_CRYS is not set
-# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_CRYSTAL is not set
-# CONFIG_ESP32_RTC_CLK_SRC_EXT_OSC is not set
-# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_OSC is not set
-# CONFIG_ESP32_RTC_CLK_SRC_INT_8MD256 is not set
-# CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_8MD256 is not set
-CONFIG_ESP32_RTC_CLK_CAL_CYCLES=1024
-# CONFIG_ESP32_XTAL_FREQ_26 is not set
-CONFIG_ESP32_XTAL_FREQ_40=y
-# CONFIG_ESP32_XTAL_FREQ_AUTO is not set
-CONFIG_ESP32_XTAL_FREQ=40
-CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE=y
-# CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION is not set
-CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=20
-CONFIG_ESP32_PHY_MAX_TX_POWER=20
-# CONFIG_REDUCE_PHY_TX_POWER is not set
-# CONFIG_ESP32_REDUCE_PHY_TX_POWER is not set
-# CONFIG_SPIRAM_SUPPORT is not set
-# CONFIG_ESP32_SPIRAM_SUPPORT is not set
-# CONFIG_ESP32_DEFAULT_CPU_FREQ_80 is not set
-CONFIG_ESP32_DEFAULT_CPU_FREQ_160=y
-# CONFIG_ESP32_DEFAULT_CPU_FREQ_240 is not set
-CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ=160
-CONFIG_TRACEMEM_RESERVE_DRAM=0x0
-# CONFIG_ESP32_PANIC_PRINT_HALT is not set
-CONFIG_ESP32_PANIC_PRINT_REBOOT=y
-# CONFIG_ESP32_PANIC_SILENT_REBOOT is not set
-# CONFIG_ESP32_PANIC_GDBSTUB is not set
-CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32
-CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=2304
-CONFIG_MAIN_TASK_STACK_SIZE=3584
-CONFIG_CONSOLE_UART_DEFAULT=y
-# CONFIG_CONSOLE_UART_CUSTOM is not set
-# CONFIG_CONSOLE_UART_NONE is not set
-# CONFIG_ESP_CONSOLE_UART_NONE is not set
-CONFIG_CONSOLE_UART=y
-CONFIG_CONSOLE_UART_NUM=0
-CONFIG_CONSOLE_UART_BAUDRATE=115200
-CONFIG_INT_WDT=y
-CONFIG_INT_WDT_TIMEOUT_MS=300
-CONFIG_INT_WDT_CHECK_CPU1=y
-CONFIG_TASK_WDT=y
-CONFIG_ESP_TASK_WDT=y
-# CONFIG_TASK_WDT_PANIC is not set
-CONFIG_TASK_WDT_TIMEOUT_S=5
-CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
-CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
-# CONFIG_ESP32_DEBUG_STUBS_ENABLE is not set
-CONFIG_ESP32_DEBUG_OCDAWARE=y
-CONFIG_BROWNOUT_DET=y
-CONFIG_ESP32_BROWNOUT_DET=y
-CONFIG_BROWNOUT_DET_LVL_SEL_0=y
-CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_0=y
-# CONFIG_BROWNOUT_DET_LVL_SEL_1 is not set
-# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_1 is not set
-# CONFIG_BROWNOUT_DET_LVL_SEL_2 is not set
-# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_2 is not set
-# CONFIG_BROWNOUT_DET_LVL_SEL_3 is not set
-# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_3 is not set
-# CONFIG_BROWNOUT_DET_LVL_SEL_4 is not set
-# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_4 is not set
-# CONFIG_BROWNOUT_DET_LVL_SEL_5 is not set
-# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_5 is not set
-# CONFIG_BROWNOUT_DET_LVL_SEL_6 is not set
-# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_6 is not set
-# CONFIG_BROWNOUT_DET_LVL_SEL_7 is not set
-# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_7 is not set
-CONFIG_BROWNOUT_DET_LVL=0
-CONFIG_ESP32_BROWNOUT_DET_LVL=0
-# CONFIG_DISABLE_BASIC_ROM_CONSOLE is not set
-CONFIG_IPC_TASK_STACK_SIZE=1024
-CONFIG_TIMER_TASK_STACK_SIZE=3584
-CONFIG_ESP32_WIFI_ENABLED=y
-CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=10
-CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32
-# CONFIG_ESP32_WIFI_STATIC_TX_BUFFER is not set
-CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER=y
-CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=1
-CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM=32
-# CONFIG_ESP32_WIFI_CSI_ENABLED is not set
-CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y
-CONFIG_ESP32_WIFI_TX_BA_WIN=6
-CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y
-CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y
-CONFIG_ESP32_WIFI_RX_BA_WIN=6
-CONFIG_ESP32_WIFI_RX_BA_WIN=6
-CONFIG_ESP32_WIFI_NVS_ENABLED=y
-CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0=y
-# CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_1 is not set
-CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN=752
-CONFIG_ESP32_WIFI_MGMT_SBUF_NUM=32
-CONFIG_ESP32_WIFI_IRAM_OPT=y
-CONFIG_ESP32_WIFI_RX_IRAM_OPT=y
-CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE=y
-CONFIG_ESP32_WIFI_ENABLE_WPA3_OWE_STA=y
-CONFIG_WPA_MBEDTLS_CRYPTO=y
-CONFIG_WPA_MBEDTLS_TLS_CLIENT=y
-# CONFIG_WPA_WAPI_PSK is not set
-# CONFIG_WPA_11KV_SUPPORT is not set
-# CONFIG_WPA_MBO_SUPPORT is not set
-# CONFIG_WPA_DPP_SUPPORT is not set
-# CONFIG_WPA_11R_SUPPORT is not set
-# CONFIG_WPA_WPS_SOFTAP_REGISTRAR is not set
-# CONFIG_WPA_WPS_STRICT is not set
-# CONFIG_WPA_DEBUG_PRINT is not set
-# CONFIG_WPA_TESTING_OPTIONS is not set
-# CONFIG_ESP32_ENABLE_COREDUMP_TO_FLASH is not set
-# CONFIG_ESP32_ENABLE_COREDUMP_TO_UART is not set
-CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE=y
-CONFIG_TIMER_TASK_PRIORITY=1
-CONFIG_TIMER_TASK_STACK_DEPTH=2048
-CONFIG_TIMER_QUEUE_LENGTH=10
-# CONFIG_ENABLE_STATIC_TASK_CLEAN_UP_HOOK is not set
-# CONFIG_HAL_ASSERTION_SILIENT is not set
-# CONFIG_L2_TO_L3_COPY is not set
-CONFIG_ESP_GRATUITOUS_ARP=y
-CONFIG_GARP_TMR_INTERVAL=60
-CONFIG_TCPIP_RECVMBOX_SIZE=32
-CONFIG_TCP_MAXRTX=12
-CONFIG_TCP_SYNMAXRTX=12
-CONFIG_TCP_MSS=1440
-CONFIG_TCP_MSL=60000
-CONFIG_TCP_SND_BUF_DEFAULT=5760
-CONFIG_TCP_WND_DEFAULT=5760
-CONFIG_TCP_RECVMBOX_SIZE=6
-CONFIG_TCP_QUEUE_OOSEQ=y
-CONFIG_TCP_OVERSIZE_MSS=y
-# CONFIG_TCP_OVERSIZE_QUARTER_MSS is not set
-# CONFIG_TCP_OVERSIZE_DISABLE is not set
-CONFIG_UDP_RECVMBOX_SIZE=6
-CONFIG_TCPIP_TASK_STACK_SIZE=3072
-CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
-# CONFIG_TCPIP_TASK_AFFINITY_CPU0 is not set
-# CONFIG_TCPIP_TASK_AFFINITY_CPU1 is not set
-CONFIG_TCPIP_TASK_AFFINITY=0x7FFFFFFF
-# CONFIG_PPP_SUPPORT is not set
-CONFIG_ESP32_TIME_SYSCALL_USE_RTC_HRT=y
-CONFIG_ESP32_TIME_SYSCALL_USE_RTC_FRC1=y
-# CONFIG_ESP32_TIME_SYSCALL_USE_RTC is not set
-# CONFIG_ESP32_TIME_SYSCALL_USE_HRT is not set
-# CONFIG_ESP32_TIME_SYSCALL_USE_FRC1 is not set
-# CONFIG_ESP32_TIME_SYSCALL_USE_NONE is not set
-CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT=5
-CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072
-CONFIG_ESP32_PTHREAD_STACK_MIN=768
-CONFIG_ESP32_DEFAULT_PTHREAD_CORE_NO_AFFINITY=y
-# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_0 is not set
-# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_1 is not set
-CONFIG_ESP32_PTHREAD_TASK_CORE_DEFAULT=-1
-CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT="pthread"
-CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS=y
-# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_FAILS is not set
-# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ALLOWED is not set
-# CONFIG_ESP32_ULP_COPROC_ENABLED is not set
-CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT=y
-CONFIG_SUPPORT_TERMIOS=y
-CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS=1
-# End of deprecated options
diff --git a/main/puzzle/vault/vault.cpp b/main/puzzle/vault/vault.cpp
deleted file mode 100644
index 3566b3e..0000000
--- a/main/puzzle/vault/vault.cpp
+++ /dev/null
@@ -1,130 +0,0 @@
-#include <iostream>
-#include <string>
-#include <array>
-
-// Definitions for puzzle requirements
-constexpr int TOTAL_LEVELS = 5;
-
-// Enumeration for the states of the puzzle
-enum PuzzleState {
-    STATE_UNINITIALIZED,
-    STATE_RESET,
-    STATE_PLAYING,
-    STATE_SOLVED,
-    STATE_ERROR
-};
-
-// This array maps each level to the correct button press
-const std::array<std::string, TOTAL_LEVELS> validButtons = {"A3", "F1", "U4", "C2", "L1"};
-
-PuzzleState puzzleState = STATE_UNINITIALIZED;
-int currentLevel = 0;
-
-// Function prototypes
-void displayCode(int level);
-void sendI2CUpdate(PuzzleState state);
-
-// Simulate sending an I2C update
-void sendI2CUpdate(PuzzleState state) {
-    std::cout << "Sending state " << state << " to main controller via I2C.\n";
-}
-
-// Simulate checking if the vault door is closed
-bool isVaultClosed() {
-    return true; // Return true if the door sensor indicates closed
-}
-
-// Function to display a code on the 7-segment display
-void displayCode(int level) {
-    std::cout << "Displaying code for level " << level << " on the 7-segment display.\n";
-}
-
-// Function to initialize the puzzle
-void initializePuzzle() {
-    if (isVaultClosed()) {
-        puzzleState = STATE_RESET;
-        currentLevel = 1;  // Start at level 1
-        std::cout << "Puzzle initialized. Starting at level " << currentLevel << ".\n";
-        displayCode(currentLevel); // Show the first code
-    } else {
-        std::cout << "Vault door is open. Please close the door to start the puzzle.\n";
-    }
-}
-
-// Function to lock the vault
-void lockVault() {
-    std::cout << "Vault locked.\n";
-}
-
-// Function to unlock the vault
-void unlockVault() {
-    std::cout << "Vault unlocked!\n";
-}
-
-// Function to simulate the buzzer sound
-void playErrorSound() {
-    std::cout << "Playing error sound.\n";
-}
-
-// Function to simulate blinking the 7-segment display
-void blinkDisplay() {
-    std::cout << "7-segment display is blinking to indicate an error.\n";
-}
-
-// Validate the button press for the current level
-bool isValidButtonPress(const std::string& button, int level) {
-    return button == validButtons[level - 1];
-}
-
-// Function to update the state of the puzzle based on the current level
-void updateStateAfterButtonPress(bool validPress) {
-    if (validPress) {
-        if (currentLevel >= TOTAL_LEVELS) {
-            puzzleState = STATE_SOLVED;
-            unlockVault();
-        } else {
-            puzzleState = STATE_PLAYING;
-            displayCode(currentLevel);
-        }
-    } else {
-        puzzleState = STATE_ERROR;
-        playErrorSound();
-        blinkDisplay();
-        lockVault();
-        currentLevel = 1;  // Reset to level 1
-        displayCode(currentLevel);
-    }
-    sendI2CUpdate(puzzleState);  // Notify main controller of the state change
-}
-
-int main() {
-    initializePuzzle();
-    
-    std::string buttonInput;
-
-    while (puzzleState != STATE_SOLVED) {
-        std::cout << "Enter the button pressed for level " << currentLevel << " (format Xn, e.g., A3): ";
-        std::getline(std::cin, buttonInput);
-
-        if (!buttonInput.empty() && isValidButtonPress(buttonInput, currentLevel)) {
-            currentLevel++;
-            if (currentLevel > TOTAL_LEVELS) {
-                puzzleState = STATE_SOLVED;
-                unlockVault();
-                std::cout << "The puzzle is solved and the vault is open!\n";
-            } else {
-                displayCode(currentLevel);
-            }
-        } else {
-            playErrorSound();
-            blinkDisplay();
-            lockVault();
-            puzzleState = STATE_RESET;
-            currentLevel = 1;
-            displayCode(currentLevel);
-        }
-        sendI2CUpdate(puzzleState);
-    }
-
-    return 0;
-}