# General system architecture ![Top-down system architecture diagram](../assets/architecture-level-1.svg) Important notes: - Gamepad 2 is optionally connected - The PPU and APU are implemented on the FPGA - The game logic and PPU/APU control logic runs on the STM32 only # Game controllers ## Input The playable character has 4 actions that it can perform: - movement on the x-axis (left / right) - jump - ability / use To perform these action there will be 4 buttons for the user to use. A joystick is not needed for the movement because the movement is not complex, so button fulfill this. The layout will be as follows: ![image](https://user-images.githubusercontent.com/17066065/219126294-b3fe11eb-e216-433a-9317-38f3e2ca4743.png) ## Input handling: The hardware consist out of a microcontroller and a FPGA. The microcontroller will process the game logic. For this reason the input will be handled by the microcontroller as this will improve playability (stated in research). The controller will have four buttons, so 4 data pins are needed on the microcontroller plus a ground and 3.3V or 5V pin. In total there are 6 pins needed. If the game is going to be played by 2 person, there are 4 more data pins needed so 8 data pins for both controllers. For data transfer between STM32 and FPGA there are 4 pins needed at maximum (SPI for instance). The STM32 will be used and most STM32 boards have enough I/O pins for our needs. The STM32 F030 and F091 provided by Avans both have 15 digital pins and 6 analog pins. The buttons will be connected as follows: ![image](https://user-images.githubusercontent.com/17066065/219113354-cbda7776-bc95-4d1f-8eb9-364f7d4f1b8d.png) To implement the input in the game, the input should be checked at the start of each game cycle. In this case there are no interrupts needed. # STM32 software # PPU Here's a list of features our PPU has: - 320x240 @ 60Hz VGA output (upscaled to 640x480) - single tilemap with room for 1024 tiles of 16x16 pixels - 8 colors per palette, with 4096 possible colors (12-bit color depth) - 640x480 background canvas with scrolling - NO background scrolling splits - 128 total sprites on screen (NO scanline sprite limit) - sprites are always drawn on top of the background layer - PPU control using DMA (dual-port asynchronous RAM) - tiles can be flipped using FAM or BAM - no frame buffer - vertical and horizontal sync and blank output Notable differences: - NES nametable equivalent is called BAM (background attribute register) - NES OAM equivalent is called FAM (foreground attribute register) - 320x240 @ 60Hz output Since we're using VGA, we can't use custom resolutions without an upscaler/downscaler. This resolution was chosen because it's exactly half of the lowest standard VGA resolution 640x480. - No scanline sprite limit Unless not imposing any sprite limit makes the hardware implementation impossible, or much more difficult, this is a restriction that will likely lead to frustrating debugging sessions, so will not be replicated in our custom PPU. - Sprites are 16x16 Most NES games already tile multiple 8x8 tiles together into "metatiles" to create the illusion of larger sprites. This was likely done to save on memory costs as RAM was expensive in the '80s, but since we're running on an FPGA cost is irrelevant. - Single 1024 sprite tilemap shared between foreground and background sprites The NES OAM registers contain a bit to select which tilemap to use (of two), which effectively expands each tile's index address by one byte. Instead of creating the illusion of two separate memory areas for tiles, having one large tilemap seems like a more sensible solution to indexed tiles. - 8 total palettes, with 8 colors each More colors is better. Increasing the total palette count is a very memory intensive operation, while increasing the palette color count is likely slower when looking up color values for each pixel on real hardware. - Sprites can be positioned partially off-screen on all screen edges using only the offset bits in the FAM register The NES has a separate PPUMASK register to control special color effects, and to shift sprites off the left and top screen edges, as the sprite offsets count from 0. Our PPU's FAM sprite offset bits count from -15, so the sprite can shift past the top and left screen edges, as well as the standard bottom and right edges. - No status line register, only V-sync and H-sync outputs are supplied back to CPU The NES status line register contains some handy lines, such as a buggy status line for reaching the max sprite count per scanline, and a status line for detecting collisions between background and foreground sprites. Our PPU doesn't have a scanline limit, and all hitbox detection is done in software. Software hacks involving swapping tiles during a screen draw cycle can still be achieved by counting the V-sync and H-sync pulses using interrupts. - No background scrolling splits This feature allows only part of the background canvas to be scrolled, while another portion stays still. This was used to draw HUD elements on the background layer for displaying things like health bars or score counters. Since we are working with a higher foreground sprite limit, we'll use regular foreground sprites to display HUD elements. - Sprites are always drawn on top of the background layer Our game doesn't need this capability for any visual effects. Leaving this feature out will lead to a simpler hardware design ## Hardware design schematics ### Top (level 1) ![PPU top-level design](../assets/ppu-level-1.svg) Important notes: - The STM32 can reset the PPU. This line will also be connected to a physical button on the FPGA. - The STM32 uses direct memory access to control the PPU. - The PPU's native resolution is 320x240. It works in this resolution as if it is a valid VGA signal. The STM32 is also only aware of this resolution. This resolution is referred to as "tiny" resolution. Because VGA-compatible LCD's likely don't support this resolution due to low clock speed, a built-in pixel-perfect 2X upscaler is chained after the PPU's "tiny" output. This means that the display sees the resolution as 640x480, but the PPU and STM32 only work in 320x240. - The STM32 receives the TVSYNC and THSYNC lines from the PPU. These are the VSYNC and HSYNC lines from the tiny VGA signal generator. These lines can be used to trigger interrupts for counting frames, and to make sure no read/write conflicts occur for protected memory regions in the PPU. - NVSYNC, NHSYNC and the RGB signals refer to the output of the native VGA signal generator. ### Level 2 ![PPU level 2 design (data flows from top to bottom)](../assets/ppu-level-2.svg) Important notes: - The pixel fetch logic is pipelined in 5 stages: 1. - (Foreground sprite info) calculate if foreground sprite exists at current pixel using FAM register - (Background sprite info) get background sprite info from BAM register 2. - (Sprite render) calculate pixel to read from TMM based on sprite info 3. - (Compositor) get pixel with 'highest' priority (pick first foreground sprite with non-transparent color at current pixel in order, fallback to background) - (Palette lookup) lookup palette color using palette register - (VGA signal generator) output real color to VGA signal generator - The pipeline stages with two clock cycles contain an address set and memory read step. - The pipeline takes 5 clock ticks in total. About 18 are available during each pixel. For optimal display compatibility, the output color signal should be stable before 50% of the pixel clock pulse width (9 clock ticks). - Since the "sprite info" and "sprite render" steps are fundamentally different for the foreground and background layer, these components will be combined into one for each layer respectively. They are separated in the above diagram for pipeline stage illustration. - The BAX, FAM, and PAL registers are implemented in the component that directly accesses them, but are exposed to the PPU RAM bus for writing. - Each foreground sprite render component holds its own sprite data copy from the RAM in it's own cache memory. The cache updates are fetched during the VBLANK time between each frame. ### Level 3 This diagram has several flaws, but a significant amount of time has already been spent on these, so they are highlighted here instead of being fixed. ![PPU level 3 design](../assets/ppu-level-3.svg) Flaws: - Pipeline stages 1-4 aren't properly connected in this diagram, see level 2 notes for proper functionality - The global RESET input resets all PPU RAM, but isn't connected to all RAM ports - All DATA inputs on the same line as an ADDR output are connections to a memory component. Not all of these are connected in the diagram, though they should be. - All ADDR and ADDR drivers are also tri-state. EN inputs need to be added to support switching the output on/off. Important notes: - The background sprite and foreground sprite component internally share some components for coordinate transformations - The foreground sprite component is only shown once here, but is cloned for each foreground sprite the PPU allows. - The CIDX lines between the sprite and compositor components is shared by all sprite components, and is such tri-state. A single sprite component outputs a CIDX signal based on the EN signal from the compositor. - All DATA and ADDR lines are shared between all RAM ports. WEN inputs are controlled by the address decoder. [nesppuspecs]: https://www.copetti.org/writings/consoles/nes/ [nesppudocs]: https://www.nesdev.org/wiki/PPU_programmer_reference [nesppupinout]: https://www.nesdev.org/wiki/PPU_pinout [custompputimings]: https://docs.google.com/spreadsheets/d/1MU6K4c4PtMR_JXIpc3I0ZJdLZNnoFO7G2P3olCz6LSc # APU