diff options
Diffstat (limited to 'basys3')
| -rw-r--r-- | basys3/basys3.srcs/io.xdc | 37 | ||||
| -rw-r--r-- | basys3/basys3.srcs/ppu_dispctl.vhd | 12 | ||||
| -rw-r--r-- | basys3/basys3.srcs/sources_1/ip/ppu_dispctl_pixclk/ppu_dispctl_pixclk.xci | 28 | ||||
| -rw-r--r-- | basys3/basys3.srcs/spi.vhd | 24 | ||||
| -rw-r--r-- | basys3/basys3.srcs/spi_tb.vhd | 385 | ||||
| -rw-r--r-- | basys3/basys3.srcs/top.vhd | 4 | ||||
| -rw-r--r-- | basys3/basys3.xpr | 21 |
7 files changed, 279 insertions, 232 deletions
diff --git a/basys3/basys3.srcs/io.xdc b/basys3/basys3.srcs/io.xdc index e8e47d2..85d4fc2 100644 --- a/basys3/basys3.srcs/io.xdc +++ b/basys3/basys3.srcs/io.xdc @@ -4,7 +4,7 @@ set_property IOSTANDARD LVCMOS33 [get_ports SPI_CLK] set_property PACKAGE_PIN J2 [get_ports SPI_CLK] set_property PACKAGE_PIN C15 [get_ports SPI_CS] -set_property PACKAGE_PIN L1 [get_ports SPI_MOSI] +set_property PACKAGE_PIN L2 [get_ports SPI_MOSI] set_property IOSTANDARD LVCMOS33 [get_ports SYSCLK] set_property IOSTANDARD LVCMOS33 [get_ports RESET] @@ -49,3 +49,38 @@ set_property PACKAGE_PIN C16 [get_ports VBLANK] set_property PACKAGE_PIN J1 [get_ports WEN] + +set_property IOSTANDARD LVCMOS33 [get_ports DBG_DISP_ADDR] +set_property PACKAGE_PIN R2 [get_ports DBG_DISP_ADDR] +set_property IOSTANDARD LVCMOS33 [get_ports {DBG_LEDS_OUT[15]}] +set_property IOSTANDARD LVCMOS33 [get_ports {DBG_LEDS_OUT[14]}] +set_property IOSTANDARD LVCMOS33 [get_ports {DBG_LEDS_OUT[13]}] +set_property IOSTANDARD LVCMOS33 [get_ports {DBG_LEDS_OUT[12]}] +set_property IOSTANDARD LVCMOS33 [get_ports {DBG_LEDS_OUT[11]}] +set_property IOSTANDARD LVCMOS33 [get_ports {DBG_LEDS_OUT[10]}] +set_property IOSTANDARD LVCMOS33 [get_ports {DBG_LEDS_OUT[8]}] +set_property IOSTANDARD LVCMOS33 [get_ports {DBG_LEDS_OUT[9]}] +set_property IOSTANDARD LVCMOS33 [get_ports {DBG_LEDS_OUT[7]}] +set_property IOSTANDARD LVCMOS33 [get_ports {DBG_LEDS_OUT[6]}] +set_property IOSTANDARD LVCMOS33 [get_ports {DBG_LEDS_OUT[5]}] +set_property IOSTANDARD LVCMOS33 [get_ports {DBG_LEDS_OUT[4]}] +set_property IOSTANDARD LVCMOS33 [get_ports {DBG_LEDS_OUT[3]}] +set_property IOSTANDARD LVCMOS33 [get_ports {DBG_LEDS_OUT[2]}] +set_property IOSTANDARD LVCMOS33 [get_ports {DBG_LEDS_OUT[1]}] +set_property IOSTANDARD LVCMOS33 [get_ports {DBG_LEDS_OUT[0]}] +set_property PACKAGE_PIN L1 [get_ports {DBG_LEDS_OUT[15]}] +set_property PACKAGE_PIN P1 [get_ports {DBG_LEDS_OUT[14]}] +set_property PACKAGE_PIN N3 [get_ports {DBG_LEDS_OUT[13]}] +set_property PACKAGE_PIN P3 [get_ports {DBG_LEDS_OUT[12]}] +set_property PACKAGE_PIN U3 [get_ports {DBG_LEDS_OUT[11]}] +set_property PACKAGE_PIN W3 [get_ports {DBG_LEDS_OUT[10]}] +set_property PACKAGE_PIN V3 [get_ports {DBG_LEDS_OUT[9]}] +set_property PACKAGE_PIN V13 [get_ports {DBG_LEDS_OUT[8]}] +set_property PACKAGE_PIN V14 [get_ports {DBG_LEDS_OUT[7]}] +set_property PACKAGE_PIN U14 [get_ports {DBG_LEDS_OUT[6]}] +set_property PACKAGE_PIN U15 [get_ports {DBG_LEDS_OUT[5]}] +set_property PACKAGE_PIN W18 [get_ports {DBG_LEDS_OUT[4]}] +set_property PACKAGE_PIN V19 [get_ports {DBG_LEDS_OUT[3]}] +set_property PACKAGE_PIN U19 [get_ports {DBG_LEDS_OUT[2]}] +set_property PACKAGE_PIN E19 [get_ports {DBG_LEDS_OUT[1]}] +set_property PACKAGE_PIN U16 [get_ports {DBG_LEDS_OUT[0]}] diff --git a/basys3/basys3.srcs/ppu_dispctl.vhd b/basys3/basys3.srcs/ppu_dispctl.vhd index 117b780..1d3d922 100644 --- a/basys3/basys3.srcs/ppu_dispctl.vhd +++ b/basys3/basys3.srcs/ppu_dispctl.vhd @@ -20,10 +20,10 @@ end ppu_dispctl; architecture Behavioral of ppu_dispctl is component ppu_dispctl_pixclk is port ( - clk_out1 : out std_logic; - clk_out2 : out std_logic; + npxclk : out std_logic; + tpxclk : out std_logic; reset : in std_logic; - clk_in1 : in std_logic); + sysclk : in std_logic); end component; component ppu_dispctl_slbuf port( -- scanline buffer clka : in std_logic; @@ -159,8 +159,8 @@ begin rstb_busy => open); pixel_clock: component ppu_dispctl_pixclk port map( - clk_in1 => SYSCLK, + sysclk => SYSCLK, reset => RESET, - clk_out1 => NPIXCLK, - clk_out2 => TPIXCLK); + npxclk => NPIXCLK, + tpxclk => TPIXCLK); end Behavioral; diff --git a/basys3/basys3.srcs/sources_1/ip/ppu_dispctl_pixclk/ppu_dispctl_pixclk.xci b/basys3/basys3.srcs/sources_1/ip/ppu_dispctl_pixclk/ppu_dispctl_pixclk.xci index 620084f..2e48660 100644 --- a/basys3/basys3.srcs/sources_1/ip/ppu_dispctl_pixclk/ppu_dispctl_pixclk.xci +++ b/basys3/basys3.srcs/sources_1/ip/ppu_dispctl_pixclk/ppu_dispctl_pixclk.xci @@ -65,9 +65,9 @@ "CLK_OUT5_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ], "CLK_OUT6_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ], "CLK_OUT7_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ], - "PRIMARY_PORT": [ { "value": "clk_in1", "resolve_type": "user", "usage": "all" } ], - "CLK_OUT1_PORT": [ { "value": "clk_out1", "resolve_type": "user", "usage": "all" } ], - "CLK_OUT2_PORT": [ { "value": "clk_out2", "resolve_type": "user", "usage": "all" } ], + "PRIMARY_PORT": [ { "value": "sysclk", "value_src": "user", "resolve_type": "user", "usage": "all" } ], + "CLK_OUT1_PORT": [ { "value": "npxclk", "value_src": "user", "resolve_type": "user", "usage": "all" } ], + "CLK_OUT2_PORT": [ { "value": "tpxclk", "value_src": "user", "resolve_type": "user", "usage": "all" } ], "CLK_OUT3_PORT": [ { "value": "clk_out3", "resolve_type": "user", "usage": "all" } ], "CLK_OUT4_PORT": [ { "value": "clk_out4", "resolve_type": "user", "usage": "all" } ], "CLK_OUT5_PORT": [ { "value": "clk_out5", "resolve_type": "user", "usage": "all" } ], @@ -338,8 +338,8 @@ "C_INCLK_SUM_ROW2": [ { "value": "no_secondary_input_clock ", "resolve_type": "generated", "usage": "all" } ], "C_OUTCLK_SUM_ROW0A": [ { "value": " Output Output Phase Duty Cycle Pk-to-Pk Phase", "resolve_type": "generated", "usage": "all" } ], "C_OUTCLK_SUM_ROW0B": [ { "value": " Clock Freq (MHz) (degrees) (%) Jitter (ps) Error (ps)", "resolve_type": "generated", "usage": "all" } ], - "C_OUTCLK_SUM_ROW1": [ { "value": "clk_out1__25.00000______0.000______50.0______191.696____114.212", "resolve_type": "generated", "usage": "all" } ], - "C_OUTCLK_SUM_ROW2": [ { "value": "clk_out2___6.25000______0.000______50.0______251.196____114.212", "resolve_type": "generated", "usage": "all" } ], + "C_OUTCLK_SUM_ROW1": [ { "value": "__npxclk__25.00000______0.000______50.0______191.696____114.212", "resolve_type": "generated", "usage": "all" } ], + "C_OUTCLK_SUM_ROW2": [ { "value": "__tpxclk___6.25000______0.000______50.0______251.196____114.212", "resolve_type": "generated", "usage": "all" } ], "C_OUTCLK_SUM_ROW3": [ { "value": "no_CLK_OUT3_output", "resolve_type": "generated", "usage": "all" } ], "C_OUTCLK_SUM_ROW4": [ { "value": "no_CLK_OUT4_output", "resolve_type": "generated", "usage": "all" } ], "C_OUTCLK_SUM_ROW5": [ { "value": "no_CLK_OUT5_output", "resolve_type": "generated", "usage": "all" } ], @@ -468,10 +468,10 @@ "C_CLOCK_MGR_TYPE": [ { "value": "NA", "resolve_type": "generated", "usage": "all" } ], "C_OVERRIDE_MMCM": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ], "C_OVERRIDE_PLL": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ], - "C_PRIMARY_PORT": [ { "value": "clk_in1", "resolve_type": "generated", "usage": "all" } ], + "C_PRIMARY_PORT": [ { "value": "sysclk", "resolve_type": "generated", "usage": "all" } ], "C_SECONDARY_PORT": [ { "value": "clk_in2", "resolve_type": "generated", "usage": "all" } ], - "C_CLK_OUT1_PORT": [ { "value": "clk_out1", "resolve_type": "generated", "usage": "all" } ], - "C_CLK_OUT2_PORT": [ { "value": "clk_out2", "resolve_type": "generated", "usage": "all" } ], + "C_CLK_OUT1_PORT": [ { "value": "npxclk", "resolve_type": "generated", "usage": "all" } ], + "C_CLK_OUT2_PORT": [ { "value": "tpxclk", "resolve_type": "generated", "usage": "all" } ], "C_CLK_OUT3_PORT": [ { "value": "clk_out3", "resolve_type": "generated", "usage": "all" } ], "C_CLK_OUT4_PORT": [ { "value": "clk_out4", "resolve_type": "generated", "usage": "all" } ], "C_CLK_OUT5_PORT": [ { "value": "clk_out5", "resolve_type": "generated", "usage": "all" } ], @@ -611,9 +611,9 @@ "boundary": { "ports": { "reset": [ { "direction": "in", "driver_value": "0" } ], - "clk_in1": [ { "direction": "in" } ], - "clk_out1": [ { "direction": "out" } ], - "clk_out2": [ { "direction": "out" } ] + "sysclk": [ { "direction": "in" } ], + "npxclk": [ { "direction": "out" } ], + "tpxclk": [ { "direction": "out" } ] }, "interfaces": { "reset": { @@ -645,7 +645,7 @@ "BOARD.ASSOCIATED_PARAM": [ { "value": "CLK_IN1_BOARD_INTERFACE", "usage": "all", "is_static_object": false } ] }, "port_maps": { - "CLK_IN1": [ { "physical_name": "clk_in1" } ] + "CLK_IN1": [ { "physical_name": "sysclk" } ] } }, "clock_CLK_OUT1": { @@ -663,7 +663,7 @@ "INSERT_VIP": [ { "value": "0", "resolve_type": "user", "format": "long", "usage": "simulation.rtl", "is_ips_inferred": true, "is_static_object": false } ] }, "port_maps": { - "CLK_OUT1": [ { "physical_name": "clk_out1" } ] + "CLK_OUT1": [ { "physical_name": "npxclk" } ] } }, "clock_CLK_OUT2": { @@ -681,7 +681,7 @@ "INSERT_VIP": [ { "value": "0", "resolve_type": "user", "format": "long", "usage": "simulation.rtl", "is_ips_inferred": true, "is_static_object": false } ] }, "port_maps": { - "CLK_OUT2": [ { "physical_name": "clk_out2" } ] + "CLK_OUT2": [ { "physical_name": "tpxclk" } ] } } } diff --git a/basys3/basys3.srcs/spi.vhd b/basys3/basys3.srcs/spi.vhd index 1560b54..a09d5df 100644 --- a/basys3/basys3.srcs/spi.vhd +++ b/basys3/basys3.srcs/spi.vhd @@ -16,15 +16,15 @@ architecture Behavioral of spi is signal clkFF0,clkFF1,clkFF2,clkFF3 : std_logic := '0'; -- signal for metastability synchronizer of clk SPI signal dataFF0,dataFF1,dataFF2,dataFF3 : std_logic := '0'; -- signal for metastability synchronizer of data SPI - signal SPI_REG : std_logic_vector(PPU_RAM_BUS_ADDR_WIDTH+PPU_RAM_BUS_DATA_WIDTH-1 downto 0) := (others => '0'); - signal counter : integer := 31; -- counter for data position - constant COUNTER_RESET_VALUE : integer := PPU_RAM_BUS_ADDR_WIDTH + PPU_RAM_BUS_DATA_WIDTH - 1; begin process (SYSCLK) + variable bit_idx : integer range 0 to COUNTER_RESET_VALUE := COUNTER_RESET_VALUE; -- counter for data position + variable spi_reg : std_logic_vector(PPU_RAM_BUS_ADDR_WIDTH+PPU_RAM_BUS_DATA_WIDTH-1 downto 0) := (others => '0'); begin if RESET = '1' then - counter <= COUNTER_RESET_VALUE; + spi_reg := (others => '0'); + bit_idx := COUNTER_RESET_VALUE; DATA <= (others => '0'); elsif rising_edge(SYSCLK) then -- flip flop for clk SPI to synchronise a @@ -39,17 +39,15 @@ begin dataFF3 <= dataFF2; if (clkFF3 = '0' and clkFF2 = '1') then -- check for rising edge of clk SPI - if counter > -1 then - counter <= counter - 1; - -- data transfer into vector - SPI_REG(counter) <= dataFF3; + spi_reg(bit_idx) := dataFF3; -- load new data into temporary register + + if bit_idx = 0 then + bit_idx := COUNTER_RESET_VALUE; -- reset bit index + DATA <= spi_reg; -- flush temporary register to data outpu + else + bit_idx := bit_idx - 1; -- decrement bit index end if; end if; - -- check if counter is done - if counter = -1 then - counter <= COUNTER_RESET_VALUE; -- reset counter - DATA <= SPI_REG; - end if; end if; end process; end Behavioral; diff --git a/basys3/basys3.srcs/spi_tb.vhd b/basys3/basys3.srcs/spi_tb.vhd index a8aa8c2..f6e2d21 100644 --- a/basys3/basys3.srcs/spi_tb.vhd +++ b/basys3/basys3.srcs/spi_tb.vhd @@ -36,197 +36,200 @@ begin spi_data: process begin - SPI_MOSI <= '0'; - wait for 50 ns; - SPI_CLK <= '1'; - wait for 50 ns; - SPI_CLK <= '0'; - - SPI_MOSI <= '1'; - wait for 50 ns; - SPI_CLK <= '1'; - wait for 50 ns; - SPI_CLK <= '0'; - - SPI_MOSI <= '0'; - wait for 50 ns; - SPI_CLK <= '1'; - wait for 50 ns; - SPI_CLK <= '0'; - - SPI_MOSI <= '1'; - wait for 50 ns; - SPI_CLK <= '1'; - wait for 50 ns; - SPI_CLK <= '0'; - - SPI_MOSI <= '0'; - wait for 50 ns; - SPI_CLK <= '1'; - wait for 50 ns; - SPI_CLK <= '0'; - - SPI_MOSI <= '1'; - wait for 50 ns; - SPI_CLK <= '1'; - wait for 50 ns; - SPI_CLK <= '0'; - - SPI_MOSI <= '1'; - wait for 50 ns; - SPI_CLK <= '1'; - wait for 50 ns; - SPI_CLK <= '0'; - - SPI_MOSI <= '0'; - wait for 50 ns; - SPI_CLK <= '1'; - wait for 50 ns; - SPI_CLK <= '0'; - - SPI_MOSI <= '0'; - wait for 50 ns; - SPI_CLK <= '1'; - wait for 50 ns; - SPI_CLK <= '0'; - - SPI_MOSI <= '1'; - wait for 50 ns; - SPI_CLK <= '1'; - wait for 50 ns; - SPI_CLK <= '0'; - - SPI_MOSI <= '0'; - wait for 50 ns; - SPI_CLK <= '1'; - wait for 50 ns; - SPI_CLK <= '0'; - - SPI_MOSI <= '1'; - wait for 50 ns; - SPI_CLK <= '1'; - wait for 50 ns; - SPI_CLK <= '0'; - - SPI_MOSI <= '0'; - wait for 50 ns; - SPI_CLK <= '1'; - wait for 50 ns; - SPI_CLK <= '0'; - - SPI_MOSI <= '0'; - wait for 50 ns; - SPI_CLK <= '1'; - wait for 50 ns; - SPI_CLK <= '0'; - - SPI_MOSI <= '0'; - wait for 50 ns; - SPI_CLK <= '1'; - wait for 50 ns; - SPI_CLK <= '0'; - - SPI_MOSI <= '0'; - wait for 50 ns; - SPI_CLK <= '1'; - wait for 50 ns; - SPI_CLK <= '0'; - - SPI_MOSI <= '1'; - wait for 50 ns; - SPI_CLK <= '1'; - wait for 50 ns; - SPI_CLK <= '0'; - - SPI_MOSI <= '0'; - wait for 50 ns; - SPI_CLK <= '1'; - wait for 50 ns; - SPI_CLK <= '0'; - - SPI_MOSI <= '0'; - wait for 50 ns; - SPI_CLK <= '1'; - wait for 50 ns; - SPI_CLK <= '0'; - - SPI_MOSI <= '1'; - wait for 50 ns; - SPI_CLK <= '1'; - wait for 50 ns; - SPI_CLK <= '0'; - - SPI_MOSI <= '1'; - wait for 50 ns; - SPI_CLK <= '1'; - wait for 50 ns; - SPI_CLK <= '0'; - - SPI_MOSI <= '1'; - wait for 50 ns; - SPI_CLK <= '1'; - wait for 50 ns; - SPI_CLK <= '0'; - - SPI_MOSI <= '0'; - wait for 50 ns; - SPI_CLK <= '1'; - wait for 50 ns; - SPI_CLK <= '0'; - - SPI_MOSI <= '0'; - wait for 50 ns; - SPI_CLK <= '1'; - wait for 50 ns; - SPI_CLK <= '0'; - - SPI_MOSI <= '1'; - wait for 50 ns; - SPI_CLK <= '1'; - wait for 50 ns; - SPI_CLK <= '0'; - - SPI_MOSI <= '1'; - wait for 50 ns; - SPI_CLK <= '1'; - wait for 50 ns; - SPI_CLK <= '0'; - - SPI_MOSI <= '1'; - wait for 50 ns; - SPI_CLK <= '1'; - wait for 50 ns; - SPI_CLK <= '0'; - - SPI_MOSI <= '1'; - wait for 50 ns; - SPI_CLK <= '1'; - wait for 50 ns; - SPI_CLK <= '0'; - - SPI_MOSI <= '1'; - wait for 50 ns; - SPI_CLK <= '1'; - wait for 50 ns; - SPI_CLK <= '0'; - - SPI_MOSI <= '1'; - wait for 50 ns; - SPI_CLK <= '1'; - wait for 50 ns; - SPI_CLK <= '0'; - - SPI_MOSI <= '1'; - wait for 50 ns; - SPI_CLK <= '1'; - wait for 50 ns; - SPI_CLK <= '0'; - - SPI_MOSI <= '1'; - wait for 50 ns; - SPI_CLK <= '1'; - wait for 50 ns; - SPI_CLK <= '0'; + for i in 0 to 2 loop + -- data = 0b01010110010100001001110011111111 (0x56509cff) + SPI_MOSI <= '0'; + wait for 50 ns; + SPI_CLK <= '1'; + wait for 50 ns; + SPI_CLK <= '0'; + + SPI_MOSI <= '1'; + wait for 50 ns; + SPI_CLK <= '1'; + wait for 50 ns; + SPI_CLK <= '0'; + + SPI_MOSI <= '0'; + wait for 50 ns; + SPI_CLK <= '1'; + wait for 50 ns; + SPI_CLK <= '0'; + + SPI_MOSI <= '1'; + wait for 50 ns; + SPI_CLK <= '1'; + wait for 50 ns; + SPI_CLK <= '0'; + + SPI_MOSI <= '0'; + wait for 50 ns; + SPI_CLK <= '1'; + wait for 50 ns; + SPI_CLK <= '0'; + + SPI_MOSI <= '1'; + wait for 50 ns; + SPI_CLK <= '1'; + wait for 50 ns; + SPI_CLK <= '0'; + + SPI_MOSI <= '1'; + wait for 50 ns; + SPI_CLK <= '1'; + wait for 50 ns; + SPI_CLK <= '0'; + + SPI_MOSI <= '0'; + wait for 50 ns; + SPI_CLK <= '1'; + wait for 50 ns; + SPI_CLK <= '0'; + + SPI_MOSI <= '0'; + wait for 50 ns; + SPI_CLK <= '1'; + wait for 50 ns; + SPI_CLK <= '0'; + + SPI_MOSI <= '1'; + wait for 50 ns; + SPI_CLK <= '1'; + wait for 50 ns; + SPI_CLK <= '0'; + + SPI_MOSI <= '0'; + wait for 50 ns; + SPI_CLK <= '1'; + wait for 50 ns; + SPI_CLK <= '0'; + + SPI_MOSI <= '1'; + wait for 50 ns; + SPI_CLK <= '1'; + wait for 50 ns; + SPI_CLK <= '0'; + + SPI_MOSI <= '0'; + wait for 50 ns; + SPI_CLK <= '1'; + wait for 50 ns; + SPI_CLK <= '0'; + + SPI_MOSI <= '0'; + wait for 50 ns; + SPI_CLK <= '1'; + wait for 50 ns; + SPI_CLK <= '0'; + + SPI_MOSI <= '0'; + wait for 50 ns; + SPI_CLK <= '1'; + wait for 50 ns; + SPI_CLK <= '0'; + + SPI_MOSI <= '0'; + wait for 50 ns; + SPI_CLK <= '1'; + wait for 50 ns; + SPI_CLK <= '0'; + + SPI_MOSI <= '1'; + wait for 50 ns; + SPI_CLK <= '1'; + wait for 50 ns; + SPI_CLK <= '0'; + + SPI_MOSI <= '0'; + wait for 50 ns; + SPI_CLK <= '1'; + wait for 50 ns; + SPI_CLK <= '0'; + + SPI_MOSI <= '0'; + wait for 50 ns; + SPI_CLK <= '1'; + wait for 50 ns; + SPI_CLK <= '0'; + + SPI_MOSI <= '1'; + wait for 50 ns; + SPI_CLK <= '1'; + wait for 50 ns; + SPI_CLK <= '0'; + + SPI_MOSI <= '1'; + wait for 50 ns; + SPI_CLK <= '1'; + wait for 50 ns; + SPI_CLK <= '0'; + + SPI_MOSI <= '1'; + wait for 50 ns; + SPI_CLK <= '1'; + wait for 50 ns; + SPI_CLK <= '0'; + + SPI_MOSI <= '0'; + wait for 50 ns; + SPI_CLK <= '1'; + wait for 50 ns; + SPI_CLK <= '0'; + + SPI_MOSI <= '0'; + wait for 50 ns; + SPI_CLK <= '1'; + wait for 50 ns; + SPI_CLK <= '0'; + + SPI_MOSI <= '1'; + wait for 50 ns; + SPI_CLK <= '1'; + wait for 50 ns; + SPI_CLK <= '0'; + + SPI_MOSI <= '1'; + wait for 50 ns; + SPI_CLK <= '1'; + wait for 50 ns; + SPI_CLK <= '0'; + + SPI_MOSI <= '1'; + wait for 50 ns; + SPI_CLK <= '1'; + wait for 50 ns; + SPI_CLK <= '0'; + + SPI_MOSI <= '1'; + wait for 50 ns; + SPI_CLK <= '1'; + wait for 50 ns; + SPI_CLK <= '0'; + + SPI_MOSI <= '1'; + wait for 50 ns; + SPI_CLK <= '1'; + wait for 50 ns; + SPI_CLK <= '0'; + + SPI_MOSI <= '1'; + wait for 50 ns; + SPI_CLK <= '1'; + wait for 50 ns; + SPI_CLK <= '0'; + + SPI_MOSI <= '1'; + wait for 50 ns; + SPI_CLK <= '1'; + wait for 50 ns; + SPI_CLK <= '0'; + + SPI_MOSI <= '1'; + wait for 50 ns; + SPI_CLK <= '1'; + wait for 50 ns; + SPI_CLK <= '0'; + end loop; wait for 50 ns; SPI_CLK <= '1'; diff --git a/basys3/basys3.srcs/top.vhd b/basys3/basys3.srcs/top.vhd index 84ab7eb..ed1c3b0 100644 --- a/basys3/basys3.srcs/top.vhd +++ b/basys3/basys3.srcs/top.vhd @@ -9,6 +9,8 @@ entity top is port ( SPI_CLK : in std_logic; -- incoming clock of SPI SPI_MOSI : in std_logic; -- incoming data of SPI WEN : in std_logic; -- PPU VRAM write enable + DBG_DISP_ADDR : in std_logic; -- display address/data switch (debug) + DBG_LEDS_OUT : out std_logic_vector(15 downto 0); -- debug address/data output leds R,G,B : out std_logic_vector(PPU_COLOR_OUTPUT_DEPTH-1 downto 0); VSYNC, HSYNC : out std_logic; -- VGA sync out VBLANK : out std_logic); -- vblank for synchronization @@ -44,6 +46,8 @@ begin SPI_MOSI => SPI_MOSI, DATA => SPI_DATA); + DBG_LEDS_OUT <= SPI_DATA_ADDR when DBG_DISP_ADDR = '1' else SPI_DATA_DATA; + picture_processing_unit: component ppu port map( CLK100 => SYSCLK, RESET => RESET, diff --git a/basys3/basys3.xpr b/basys3/basys3.xpr index 5b31f27..82d7be5 100644 --- a/basys3/basys3.xpr +++ b/basys3/basys3.xpr @@ -59,20 +59,20 @@ <Option Name="IPStaticSourceDir" Val="$PIPUSERFILESDIR/ipstatic"/> <Option Name="EnableBDX" Val="FALSE"/> <Option Name="DSABoardId" Val="basys3"/> - <Option Name="WTXSimLaunchSim" Val="5"/> + <Option Name="WTXSimLaunchSim" Val="19"/> <Option Name="WTModelSimLaunchSim" Val="0"/> <Option Name="WTQuestaLaunchSim" Val="0"/> <Option Name="WTIesLaunchSim" Val="0"/> <Option Name="WTVcsLaunchSim" Val="0"/> <Option Name="WTRivieraLaunchSim" Val="0"/> <Option Name="WTActivehdlLaunchSim" Val="0"/> - <Option Name="WTXSimExportSim" Val="0"/> - <Option Name="WTModelSimExportSim" Val="0"/> - <Option Name="WTQuestaExportSim" Val="0"/> + <Option Name="WTXSimExportSim" Val="1"/> + <Option Name="WTModelSimExportSim" Val="1"/> + <Option Name="WTQuestaExportSim" Val="1"/> <Option Name="WTIesExportSim" Val="0"/> - <Option Name="WTVcsExportSim" Val="0"/> - <Option Name="WTRivieraExportSim" Val="0"/> - <Option Name="WTActivehdlExportSim" Val="0"/> + <Option Name="WTVcsExportSim" Val="1"/> + <Option Name="WTRivieraExportSim" Val="1"/> + <Option Name="WTActivehdlExportSim" Val="1"/> <Option Name="GenerateIPUpgradeLog" Val="TRUE"/> <Option Name="XSimRadix" Val="hex"/> <Option Name="XSimTimeUnit" Val="ns"/> @@ -209,6 +209,13 @@ <Attr Name="UsedIn" Val="simulation"/> </FileInfo> </File> + <File Path="$PSRCDIR/ppu_comp_tb.vhd"> + <FileInfo SFType="VHDL2008"> + <Attr Name="AutoDisabled" Val="1"/> + <Attr Name="UsedIn" Val="synthesis"/> + <Attr Name="UsedIn" Val="simulation"/> + </FileInfo> + </File> <Config> <Option Name="DesignMode" Val="RTL"/> <Option Name="TopModule" Val="spi_tb"/> |