1 files changed, 69 insertions, 0 deletions
diff --git a/basys3/basys3.srcs/ppu_plut.vhd b/basys3/basys3.srcs/ppu_plut.vhd
new file mode 100644
index 0000000..d2e132e
--- /dev/null
+++ b/basys3/basys3.srcs/ppu_plut.vhd
@@ -0,0 +1,69 @@
+library ieee;
+use ieee.std_logic_1164.all;
+use work.ppu_consts.all;
+use ieee.numeric_std.all;
+use ieee.std_logic_unsigned.all;
+
+entity ppu_plut is port ( 
+	CLK : in std_logic; -- system clock
+	CIDX : in std_logic_vector(PPU_PALETTE_CIDX_WIDTH-1 downto 0); -- color in
+	RESET : in std_logic;
+
+	-- internal memory block (AUX)
+	PAL_WEN : in std_logic; -- VRAM PAL write enable
+	PAL_ADDR : in std_logic_vector(PPU_PAL_ADDR_WIDTH-1 downto 0); -- VRAM PAL address
+	PAL_DATA : in std_logic_vector(PPU_PAL_DATA_WIDTH-1 downto 0); -- VRAM PAL data
+
+	R,G,B : out std_logic_vector(PPU_COLOR_OUTPUT_DEPTH-1 downto 0)); -- VGA color out
+end ppu_plut;
+
+architecture Behavioral of ppu_plut is
+	component er_ram
+		generic(
+			ADDR_W : natural := PPU_PAL_ADDR_WIDTH; -- ADDR line width
+			DATA_W : natural := PPU_PAL_DATA_WIDTH; -- DATA line width
+			ADDR_LOW : natural := 16#0000#; -- starting address
+			ADDR_RANGE : natural := 16#0040#); -- amount of valid addresses after ADDR_LOW
+		port(
+			CLK : in std_logic; -- clock
+			RST : in std_logic; -- async memory clear
+			WEN : in std_logic; -- write enable
+			ADDR : in std_logic_vector(ADDR_W-1 downto 0);
+			DATA : in std_logic_vector(DATA_W-1 downto 0);
+			REG : out std_logic_vector((ADDR_RANGE*DATA_W)-1 downto 0)); -- exposed register output
+	end component;
+	
+	signal PLUT : std_logic_vector((64 * PPU_PAL_DATA_WIDTH)-1 downto 0) := (others => '0');
+	signal CHECK_ZERO_CIDX : std_logic_vector(PPU_PALETTE_CIDX_WIDTH-1 downto 0) := (others => '0'); -- color in
+begin
+	RAM : component er_ram port map(
+		CLK => CLK,
+		RST => RESET,
+		WEN => PAL_WEN,
+		ADDR => PAL_ADDR,
+		DATA => PAL_DATA,
+		REG => PLUT);
+
+	process(CLK, RESET)
+		variable COLOR : std_logic_vector(PPU_PAL_DATA_WIDTH-1 downto 0) := (others => '0'); -- COLORS RGB IN
+		variable CIDX_INT : integer := 0;
+	begin
+		if RESET = '1' then
+			PLUT <= (others => '0');
+		else
+			if rising_edge (CLK) then
+				if (CIDX /= CHECK_ZERO_CIDX) then
+					CIDX_INT := to_integer(unsigned(CIDX));
+					COLOR := PLUT((12 * CIDX_INT) + 11 downto (12*CIDX_INT));
+					R <= COLOR(11 downto  8);
+					G <= COLOR(7 downto 4);
+					B <= COLOR(3 downto 0);
+				else
+					R <= x"0";
+					G <= x"0";
+					B <= x"0";
+				end if;
+			end if;
+		end if;
+	end process;
+end Behavioral;