diff options
Diffstat (limited to 'GameLogic/stm32/main.c')
| -rw-r--r-- | GameLogic/stm32/main.c | 460 |
1 files changed, 460 insertions, 0 deletions
diff --git a/GameLogic/stm32/main.c b/GameLogic/stm32/main.c new file mode 100644 index 0000000..edabde5 --- /dev/null +++ b/GameLogic/stm32/main.c @@ -0,0 +1,460 @@ +/* USER CODE BEGIN Header */
+/**
+ ******************************************************************************
+ * @file : main.c
+ * @brief : Main program body
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2023 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software is licensed under terms that can be found in the LICENSE file
+ * in the root directory of this software component.
+ * If no LICENSE file comes with this software, it is provided AS-IS.
+ *
+ ******************************************************************************
+ */
+/* USER CODE END Header */
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN PTD */
+
+/* USER CODE END PTD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+SPI_HandleTypeDef hspi1;
+
+TIM_HandleTypeDef htim3;
+
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+void SystemClock_Config(void);
+static void MX_GPIO_Init(void);
+static void MX_SPI1_Init(void);
+static void MX_TIM3_Init(void);
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/**
+ * @brief The application entry point.
+ * @retval int
+ */
+int main(void)
+{
+ /* USER CODE BEGIN 1 */
+
+ /* USER CODE END 1 */
+
+ /* MCU Configuration--------------------------------------------------------*/
+
+ /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
+ HAL_Init();
+
+ /* USER CODE BEGIN Init */
+
+ /* USER CODE END Init */
+
+ /* Configure the system clock */
+ SystemClock_Config();
+
+ /* USER CODE BEGIN SysInit */
+
+ /* USER CODE END SysInit */
+
+ /* Initialize all configured peripherals */
+ MX_GPIO_Init();
+ MX_SPI1_Init();
+ MX_TIM3_Init();
+ /* USER CODE BEGIN 2 */
+ // correct byte for led control
+ uint16_t pos_x = 310; //0b0000 0001 0011 0110
+ uint16_t pos_y = 210;
+
+ uint8_t left = 0;
+ uint8_t right = 0;
+ uint8_t up = 0;
+ uint8_t down = 0;
+
+ uint8_t tileMap[30][40] =
+ {
+ {1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 },
+ {1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 },
+ {1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 },
+ {1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 },
+ {1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 },
+ {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
+ {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
+ {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
+ {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
+ {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
+ {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
+ {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
+ {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
+ {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
+ {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
+ {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
+ {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
+ {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
+ {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
+ {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
+ {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
+ {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
+ {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
+ {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
+ {1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 },
+ {1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 },
+ {1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 },
+ {1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 },
+ {1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 },
+ {1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 }
+
+
+
+ };
+
+ uint8_t pos_x_bit[2];
+ uint8_t pos_y_bit[2];
+ uint8_t data_send[3];
+
+ int tileX;
+ int tileY;
+
+
+
+
+
+ /* USER CODE END 2 */
+
+ /* Infinite loop */
+ /* USER CODE BEGIN WHILE */
+ while (1)
+ {
+
+ //shift int into 2 8bit u_int
+ pos_x_bit[1] = pos_x & 0xff;
+ pos_x_bit[0] = (pos_x >> 8);
+
+ pos_y_bit[1] = pos_y & 0xff;
+ pos_y_bit[0] = (pos_y >> 8);
+
+ // simplify coor for tilemap
+ tileX = pos_x / 20;
+ tileY = pos_y / 16;
+
+
+ //read buttons 4 times
+ if(HAL_GPIO_ReadPin(GPIOB, GPIO_PIN_4) == 1)
+ {
+ left++;
+ }
+ else
+ {
+ left = 0;
+ }
+ if(HAL_GPIO_ReadPin(GPIOB, GPIO_PIN_5) == 1)
+ {
+ right++;
+ }
+ else
+ {
+ right = 0;
+ }
+ if(HAL_GPIO_ReadPin(GPIOB, GPIO_PIN_6) == 1)
+ {
+ up++;
+ }
+ else
+ {
+ up = 0;
+ }
+ if(HAL_GPIO_ReadPin(GPIOB, GPIO_PIN_8) == 1)
+ {
+ down++;
+ }
+ else
+ {
+ down = 0;
+ }
+ // compare position x/y with tilemap for collision
+ if(left > 10)
+ {
+ if(tileMap[tileY][tileX] == 1)
+ {
+ left = 0;
+ }
+ else
+ {
+ pos_x--;
+ }
+ left = 0;
+ }
+ if(right > 10)
+ {
+ if(tileMap[tileY][tileX+1] == 1)
+ {
+ right = 0;
+ }
+ else
+ {
+ pos_x++;
+ }
+ right = 0;
+ }
+ if(up > 10)
+ {
+ if(tileMap[tileY+1][tileX] == 1)
+ {
+ up = 0;
+ }
+ else
+ {
+ pos_y++;
+ }
+ up = 0;
+ }
+ if(down > 10)
+ {
+ if( tileMap[tileY][tileX] == 1)
+ {
+ down = 0;
+ }
+ else
+ {
+ pos_y--;
+ }
+ down = 0;
+ }
+ // send data via SPI
+ data_send[0] = 0b00000000; // first byte is address
+ data_send[1] = pos_y_bit[0] ;
+ data_send[2] = pos_y_bit[1];
+ HAL_GPIO_WritePin(GPIOA, GPIO_PIN_9, GPIO_PIN_RESET);
+ HAL_SPI_Transmit(&hspi1, data_send, 3, HAL_MAX_DELAY); //3*8 bit
+ HAL_GPIO_WritePin(GPIOA, GPIO_PIN_9, GPIO_PIN_SET);
+ data_send[0] = 0b01000000; // first byte is address
+ data_send[1] = pos_x_bit[0] ;
+ data_send[2] = pos_x_bit[1];
+ HAL_GPIO_WritePin(GPIOA, GPIO_PIN_9, GPIO_PIN_RESET);
+ HAL_SPI_Transmit(&hspi1, data_send, 3, HAL_MAX_DELAY); //3*8 bit
+ HAL_GPIO_WritePin(GPIOA, GPIO_PIN_9, GPIO_PIN_SET);
+
+
+ /* USER CODE END WHILE */
+
+ /* USER CODE BEGIN 3 */
+ }
+ /* USER CODE END 3 */
+}
+
+/**
+ * @brief System Clock Configuration
+ * @retval None
+ */
+void SystemClock_Config(void)
+{
+ RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+ RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+
+ /** Initializes the RCC Oscillators according to the specified parameters
+ * in the RCC_OscInitTypeDef structure.
+ */
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
+ RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+ RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+ {
+ Error_Handler();
+ }
+
+ /** Initializes the CPU, AHB and APB buses clocks
+ */
+ RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
+ |RCC_CLOCKTYPE_PCLK1;
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI;
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
+
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK)
+ {
+ Error_Handler();
+ }
+}
+
+/**
+ * @brief SPI1 Initialization Function
+ * @param None
+ * @retval None
+ */
+static void MX_SPI1_Init(void)
+{
+
+ /* USER CODE BEGIN SPI1_Init 0 */
+
+ /* USER CODE END SPI1_Init 0 */
+
+ /* USER CODE BEGIN SPI1_Init 1 */
+
+ /* USER CODE END SPI1_Init 1 */
+ /* SPI1 parameter configuration*/
+ hspi1.Instance = SPI1;
+ hspi1.Init.Mode = SPI_MODE_MASTER;
+ hspi1.Init.Direction = SPI_DIRECTION_1LINE;
+ hspi1.Init.DataSize = SPI_DATASIZE_8BIT;
+ hspi1.Init.CLKPolarity = SPI_POLARITY_LOW;
+ hspi1.Init.CLKPhase = SPI_PHASE_1EDGE;
+ hspi1.Init.NSS = SPI_NSS_SOFT;
+ hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_16;
+ hspi1.Init.FirstBit = SPI_FIRSTBIT_MSB;
+ hspi1.Init.TIMode = SPI_TIMODE_DISABLE;
+ hspi1.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
+ hspi1.Init.CRCPolynomial = 7;
+ hspi1.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
+ hspi1.Init.NSSPMode = SPI_NSS_PULSE_DISABLE;
+ if (HAL_SPI_Init(&hspi1) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /* USER CODE BEGIN SPI1_Init 2 */
+
+ /* USER CODE END SPI1_Init 2 */
+
+}
+
+/**
+ * @brief TIM3 Initialization Function
+ * @param None
+ * @retval None
+ */
+static void MX_TIM3_Init(void)
+{
+
+ /* USER CODE BEGIN TIM3_Init 0 */
+
+ /* USER CODE END TIM3_Init 0 */
+
+ TIM_ClockConfigTypeDef sClockSourceConfig = {0};
+ TIM_MasterConfigTypeDef sMasterConfig = {0};
+
+ /* USER CODE BEGIN TIM3_Init 1 */
+
+ /* USER CODE END TIM3_Init 1 */
+ htim3.Instance = TIM3;
+ htim3.Init.Prescaler = 7999;
+ htim3.Init.CounterMode = TIM_COUNTERMODE_UP;
+ htim3.Init.Period = 65535;
+ htim3.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+ htim3.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+ if (HAL_TIM_Base_Init(&htim3) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
+ if (HAL_TIM_ConfigClockSource(&htim3, &sClockSourceConfig) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
+ sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
+ if (HAL_TIMEx_MasterConfigSynchronization(&htim3, &sMasterConfig) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /* USER CODE BEGIN TIM3_Init 2 */
+
+ /* USER CODE END TIM3_Init 2 */
+
+}
+
+/**
+ * @brief GPIO Initialization Function
+ * @param None
+ * @retval None
+ */
+static void MX_GPIO_Init(void)
+{
+ GPIO_InitTypeDef GPIO_InitStruct = {0};
+
+ /* GPIO Ports Clock Enable */
+ __HAL_RCC_GPIOA_CLK_ENABLE();
+ __HAL_RCC_GPIOB_CLK_ENABLE();
+
+ /*Configure GPIO pin Output Level */
+ HAL_GPIO_WritePin(GPIOA, GPIO_PIN_9, GPIO_PIN_SET);
+
+ /*Configure GPIO pin : PA9 */
+ GPIO_InitStruct.Pin = GPIO_PIN_9;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+ HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+ /*Configure GPIO pins : PB4 PB5 PB6 PB8 */
+ GPIO_InitStruct.Pin = GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_8;
+ GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
+ GPIO_InitStruct.Pull = GPIO_PULLDOWN;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+}
+
+/* USER CODE BEGIN 4 */
+
+/* USER CODE END 4 */
+
+/**
+ * @brief This function is executed in case of error occurrence.
+ * @retval None
+ */
+void Error_Handler(void)
+{
+ /* USER CODE BEGIN Error_Handler_Debug */
+ /* User can add his own implementation to report the HAL error return state */
+ __disable_irq();
+ while (1)
+ {
+ }
+ /* USER CODE END Error_Handler_Debug */
+}
+
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief Reports the name of the source file and the source line number
+ * where the assert_param error has occurred.
+ * @param file: pointer to the source file name
+ * @param line: assert_param error line source number
+ * @retval None
+ */
+void assert_failed(uint8_t *file, uint32_t line)
+{
+ /* USER CODE BEGIN 6 */
+ /* User can add his own implementation to report the file name and line number,
+ ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+ /* USER CODE END 6 */
+}
+#endif /* USE_FULL_ASSERT */
|