diff options
Diffstat (limited to 'GameLogic/stm32/main.c')
| -rw-r--r-- | GameLogic/stm32/main.c | 460 |
1 files changed, 0 insertions, 460 deletions
diff --git a/GameLogic/stm32/main.c b/GameLogic/stm32/main.c deleted file mode 100644 index edabde5..0000000 --- a/GameLogic/stm32/main.c +++ /dev/null @@ -1,460 +0,0 @@ -/* USER CODE BEGIN Header */
-/**
- ******************************************************************************
- * @file : main.c
- * @brief : Main program body
- ******************************************************************************
- * @attention
- *
- * Copyright (c) 2023 STMicroelectronics.
- * All rights reserved.
- *
- * This software is licensed under terms that can be found in the LICENSE file
- * in the root directory of this software component.
- * If no LICENSE file comes with this software, it is provided AS-IS.
- *
- ******************************************************************************
- */
-/* USER CODE END Header */
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-
-/* Private includes ----------------------------------------------------------*/
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-/* Private typedef -----------------------------------------------------------*/
-/* USER CODE BEGIN PTD */
-
-/* USER CODE END PTD */
-
-/* Private define ------------------------------------------------------------*/
-/* USER CODE BEGIN PD */
-/* USER CODE END PD */
-
-/* Private macro -------------------------------------------------------------*/
-/* USER CODE BEGIN PM */
-
-/* USER CODE END PM */
-
-/* Private variables ---------------------------------------------------------*/
-SPI_HandleTypeDef hspi1;
-
-TIM_HandleTypeDef htim3;
-
-/* USER CODE BEGIN PV */
-
-/* USER CODE END PV */
-
-/* Private function prototypes -----------------------------------------------*/
-void SystemClock_Config(void);
-static void MX_GPIO_Init(void);
-static void MX_SPI1_Init(void);
-static void MX_TIM3_Init(void);
-/* USER CODE BEGIN PFP */
-
-/* USER CODE END PFP */
-
-/* Private user code ---------------------------------------------------------*/
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-/**
- * @brief The application entry point.
- * @retval int
- */
-int main(void)
-{
- /* USER CODE BEGIN 1 */
-
- /* USER CODE END 1 */
-
- /* MCU Configuration--------------------------------------------------------*/
-
- /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
- HAL_Init();
-
- /* USER CODE BEGIN Init */
-
- /* USER CODE END Init */
-
- /* Configure the system clock */
- SystemClock_Config();
-
- /* USER CODE BEGIN SysInit */
-
- /* USER CODE END SysInit */
-
- /* Initialize all configured peripherals */
- MX_GPIO_Init();
- MX_SPI1_Init();
- MX_TIM3_Init();
- /* USER CODE BEGIN 2 */
- // correct byte for led control
- uint16_t pos_x = 310; //0b0000 0001 0011 0110
- uint16_t pos_y = 210;
-
- uint8_t left = 0;
- uint8_t right = 0;
- uint8_t up = 0;
- uint8_t down = 0;
-
- uint8_t tileMap[30][40] =
- {
- {1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 },
- {1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 },
- {1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 },
- {1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 },
- {1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 },
- {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
- {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
- {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
- {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
- {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
- {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
- {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
- {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
- {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
- {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
- {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
- {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
- {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
- {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
- {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
- {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
- {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
- {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
- {1,1,1,1,1,1,1,1,1,1 ,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0 ,1,1,1,1,1,1,1,1,1,1 },
- {1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 },
- {1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 },
- {1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 },
- {1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 },
- {1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 },
- {1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 ,1,1,1,1,1,1,1,1,1,1 }
-
-
-
- };
-
- uint8_t pos_x_bit[2];
- uint8_t pos_y_bit[2];
- uint8_t data_send[3];
-
- int tileX;
- int tileY;
-
-
-
-
-
- /* USER CODE END 2 */
-
- /* Infinite loop */
- /* USER CODE BEGIN WHILE */
- while (1)
- {
-
- //shift int into 2 8bit u_int
- pos_x_bit[1] = pos_x & 0xff;
- pos_x_bit[0] = (pos_x >> 8);
-
- pos_y_bit[1] = pos_y & 0xff;
- pos_y_bit[0] = (pos_y >> 8);
-
- // simplify coor for tilemap
- tileX = pos_x / 20;
- tileY = pos_y / 16;
-
-
- //read buttons 4 times
- if(HAL_GPIO_ReadPin(GPIOB, GPIO_PIN_4) == 1)
- {
- left++;
- }
- else
- {
- left = 0;
- }
- if(HAL_GPIO_ReadPin(GPIOB, GPIO_PIN_5) == 1)
- {
- right++;
- }
- else
- {
- right = 0;
- }
- if(HAL_GPIO_ReadPin(GPIOB, GPIO_PIN_6) == 1)
- {
- up++;
- }
- else
- {
- up = 0;
- }
- if(HAL_GPIO_ReadPin(GPIOB, GPIO_PIN_8) == 1)
- {
- down++;
- }
- else
- {
- down = 0;
- }
- // compare position x/y with tilemap for collision
- if(left > 10)
- {
- if(tileMap[tileY][tileX] == 1)
- {
- left = 0;
- }
- else
- {
- pos_x--;
- }
- left = 0;
- }
- if(right > 10)
- {
- if(tileMap[tileY][tileX+1] == 1)
- {
- right = 0;
- }
- else
- {
- pos_x++;
- }
- right = 0;
- }
- if(up > 10)
- {
- if(tileMap[tileY+1][tileX] == 1)
- {
- up = 0;
- }
- else
- {
- pos_y++;
- }
- up = 0;
- }
- if(down > 10)
- {
- if( tileMap[tileY][tileX] == 1)
- {
- down = 0;
- }
- else
- {
- pos_y--;
- }
- down = 0;
- }
- // send data via SPI
- data_send[0] = 0b00000000; // first byte is address
- data_send[1] = pos_y_bit[0] ;
- data_send[2] = pos_y_bit[1];
- HAL_GPIO_WritePin(GPIOA, GPIO_PIN_9, GPIO_PIN_RESET);
- HAL_SPI_Transmit(&hspi1, data_send, 3, HAL_MAX_DELAY); //3*8 bit
- HAL_GPIO_WritePin(GPIOA, GPIO_PIN_9, GPIO_PIN_SET);
- data_send[0] = 0b01000000; // first byte is address
- data_send[1] = pos_x_bit[0] ;
- data_send[2] = pos_x_bit[1];
- HAL_GPIO_WritePin(GPIOA, GPIO_PIN_9, GPIO_PIN_RESET);
- HAL_SPI_Transmit(&hspi1, data_send, 3, HAL_MAX_DELAY); //3*8 bit
- HAL_GPIO_WritePin(GPIOA, GPIO_PIN_9, GPIO_PIN_SET);
-
-
- /* USER CODE END WHILE */
-
- /* USER CODE BEGIN 3 */
- }
- /* USER CODE END 3 */
-}
-
-/**
- * @brief System Clock Configuration
- * @retval None
- */
-void SystemClock_Config(void)
-{
- RCC_OscInitTypeDef RCC_OscInitStruct = {0};
- RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
-
- /** Initializes the RCC Oscillators according to the specified parameters
- * in the RCC_OscInitTypeDef structure.
- */
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
- RCC_OscInitStruct.HSIState = RCC_HSI_ON;
- RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
- {
- Error_Handler();
- }
-
- /** Initializes the CPU, AHB and APB buses clocks
- */
- RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
- |RCC_CLOCKTYPE_PCLK1;
- RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI;
- RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
- RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
-
- if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK)
- {
- Error_Handler();
- }
-}
-
-/**
- * @brief SPI1 Initialization Function
- * @param None
- * @retval None
- */
-static void MX_SPI1_Init(void)
-{
-
- /* USER CODE BEGIN SPI1_Init 0 */
-
- /* USER CODE END SPI1_Init 0 */
-
- /* USER CODE BEGIN SPI1_Init 1 */
-
- /* USER CODE END SPI1_Init 1 */
- /* SPI1 parameter configuration*/
- hspi1.Instance = SPI1;
- hspi1.Init.Mode = SPI_MODE_MASTER;
- hspi1.Init.Direction = SPI_DIRECTION_1LINE;
- hspi1.Init.DataSize = SPI_DATASIZE_8BIT;
- hspi1.Init.CLKPolarity = SPI_POLARITY_LOW;
- hspi1.Init.CLKPhase = SPI_PHASE_1EDGE;
- hspi1.Init.NSS = SPI_NSS_SOFT;
- hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_16;
- hspi1.Init.FirstBit = SPI_FIRSTBIT_MSB;
- hspi1.Init.TIMode = SPI_TIMODE_DISABLE;
- hspi1.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
- hspi1.Init.CRCPolynomial = 7;
- hspi1.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
- hspi1.Init.NSSPMode = SPI_NSS_PULSE_DISABLE;
- if (HAL_SPI_Init(&hspi1) != HAL_OK)
- {
- Error_Handler();
- }
- /* USER CODE BEGIN SPI1_Init 2 */
-
- /* USER CODE END SPI1_Init 2 */
-
-}
-
-/**
- * @brief TIM3 Initialization Function
- * @param None
- * @retval None
- */
-static void MX_TIM3_Init(void)
-{
-
- /* USER CODE BEGIN TIM3_Init 0 */
-
- /* USER CODE END TIM3_Init 0 */
-
- TIM_ClockConfigTypeDef sClockSourceConfig = {0};
- TIM_MasterConfigTypeDef sMasterConfig = {0};
-
- /* USER CODE BEGIN TIM3_Init 1 */
-
- /* USER CODE END TIM3_Init 1 */
- htim3.Instance = TIM3;
- htim3.Init.Prescaler = 7999;
- htim3.Init.CounterMode = TIM_COUNTERMODE_UP;
- htim3.Init.Period = 65535;
- htim3.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
- htim3.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
- if (HAL_TIM_Base_Init(&htim3) != HAL_OK)
- {
- Error_Handler();
- }
- sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
- if (HAL_TIM_ConfigClockSource(&htim3, &sClockSourceConfig) != HAL_OK)
- {
- Error_Handler();
- }
- sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
- sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
- if (HAL_TIMEx_MasterConfigSynchronization(&htim3, &sMasterConfig) != HAL_OK)
- {
- Error_Handler();
- }
- /* USER CODE BEGIN TIM3_Init 2 */
-
- /* USER CODE END TIM3_Init 2 */
-
-}
-
-/**
- * @brief GPIO Initialization Function
- * @param None
- * @retval None
- */
-static void MX_GPIO_Init(void)
-{
- GPIO_InitTypeDef GPIO_InitStruct = {0};
-
- /* GPIO Ports Clock Enable */
- __HAL_RCC_GPIOA_CLK_ENABLE();
- __HAL_RCC_GPIOB_CLK_ENABLE();
-
- /*Configure GPIO pin Output Level */
- HAL_GPIO_WritePin(GPIOA, GPIO_PIN_9, GPIO_PIN_SET);
-
- /*Configure GPIO pin : PA9 */
- GPIO_InitStruct.Pin = GPIO_PIN_9;
- GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
- HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-
- /*Configure GPIO pins : PB4 PB5 PB6 PB8 */
- GPIO_InitStruct.Pin = GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_8;
- GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
- GPIO_InitStruct.Pull = GPIO_PULLDOWN;
- HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
-}
-
-/* USER CODE BEGIN 4 */
-
-/* USER CODE END 4 */
-
-/**
- * @brief This function is executed in case of error occurrence.
- * @retval None
- */
-void Error_Handler(void)
-{
- /* USER CODE BEGIN Error_Handler_Debug */
- /* User can add his own implementation to report the HAL error return state */
- __disable_irq();
- while (1)
- {
- }
- /* USER CODE END Error_Handler_Debug */
-}
-
-#ifdef USE_FULL_ASSERT
-/**
- * @brief Reports the name of the source file and the source line number
- * where the assert_param error has occurred.
- * @param file: pointer to the source file name
- * @param line: assert_param error line source number
- * @retval None
- */
-void assert_failed(uint8_t *file, uint32_t line)
-{
- /* USER CODE BEGIN 6 */
- /* User can add his own implementation to report the file name and line number,
- ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
- /* USER CODE END 6 */
-}
-#endif /* USE_FULL_ASSERT */
|