merge `dev` into `ppu`

1 files changed, 197 insertions, 0 deletions

diff --git a/src/stm32/setup.c b/src/stm32/setup.c
new file mode 100644
index 0000000..2c3552b
--- /dev/null
+++ b/src/stm32/setup.c
@@ -0,0 +1,197 @@
+#include <stm32f0xx_hal.h>
+#include <stm32f0xx_hal_spi.h>
+#include <stm32f0xx_hal_uart.h>
+#include <stm32f0xx_hal_gpio.h>
+#include <FreeRTOS.h>
+#include <task.h>
+
+#include "main.h"
+#include "setup.h"
+#include "ppu/ppu.h"
+
+UART_HandleTypeDef huart2 = {
+	.Instance = USART2,
+	.Init.BaudRate = 115200,
+	.Init.WordLength = UART_WORDLENGTH_8B,
+	.Init.StopBits = UART_STOPBITS_1,
+	.Init.Parity = UART_PARITY_NONE,
+	.Init.Mode = UART_MODE_TX_RX,
+	.Init.HwFlowCtl = UART_HWCONTROL_NONE,
+	.Init.OverSampling = UART_OVERSAMPLING_16,
+	.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE,
+	.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT,
+};
+
+GPIO_InitTypeDef spi_gpio = {
+	.Pin = HH_IO_SPI_PINS,
+	.Mode = GPIO_MODE_AF_PP,
+	.Pull = GPIO_NOPULL,
+	.Speed = GPIO_SPEED_FREQ_HIGH,
+	.Alternate = GPIO_AF0_SPI1,
+};
+
+SPI_HandleTypeDef hspi1 = {
+	.Instance = SPI1,
+	.Init.Mode = SPI_MODE_MASTER,
+	.Init.Direction = SPI_DIRECTION_1LINE,
+	.Init.DataSize = SPI_DATASIZE_8BIT,
+	.Init.CLKPolarity = SPI_POLARITY_LOW,
+	.Init.CLKPhase = SPI_PHASE_1EDGE,
+	.Init.NSS = SPI_NSS_SOFT,
+	.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_16,
+	.Init.FirstBit = SPI_FIRSTBIT_MSB,
+	.Init.TIMode = SPI_TIMODE_DISABLE,
+	.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE,
+	.Init.CRCPolynomial = 7,
+	.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE,
+	.Init.NSSPMode = SPI_NSS_PULSE_DISABLE,
+};
+
+TIM_HandleTypeDef htim3 = {
+	.Instance = TIM3,
+	.Init.Prescaler = 7999,
+	.Init.CounterMode = TIM_COUNTERMODE_UP,
+	.Init.Period = 65535,
+	.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1,
+	.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE,
+};
+
+static void hh_io_spi_setup();
+static void hh_io_tim_setup();
+static void hh_io_usart2_setup();
+static void hh_io_gpio_setup();
+static void hh_io_clock_setup();
+static void hh_io_setup_error_handler();
+
+void hh_setup() {
+	HAL_Init();
+
+	hh_io_clock_setup();
+	hh_io_usart2_setup();
+	hh_io_gpio_setup();
+	hh_io_spi_setup();
+	hh_io_tim_setup();
+
+	hh_ppu_init();
+}
+
+void hh_exit() {
+	hh_ppu_deinit();
+
+	HAL_DeInit();
+}
+
+void hh_io_clock_setup() {
+	if (HAL_OK != HAL_RCC_OscConfig(&(RCC_OscInitTypeDef){
+		.OscillatorType = RCC_OSCILLATORTYPE_HSI,
+		.HSIState = RCC_HSI_ON,
+		.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT,
+		.PLL.PLLState = RCC_PLL_ON,
+	})) return hh_io_setup_error_handler();
+
+	// cpu, ahb & apb clocks
+	if (HAL_OK != HAL_RCC_ClockConfig(&(RCC_ClkInitTypeDef){
+		.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1,
+		.SYSCLKSource = RCC_SYSCLKSOURCE_HSI,
+		.AHBCLKDivider = RCC_SYSCLK_DIV1,
+		.APB1CLKDivider = RCC_HCLK_DIV1,
+	}, FLASH_LATENCY_1)) return hh_io_setup_error_handler();
+
+	// usart2 clock (usb serial)
+	if (HAL_RCCEx_PeriphCLKConfig(&(RCC_PeriphCLKInitTypeDef){
+		.PeriphClockSelection = RCC_PERIPHCLK_USART2,
+		.Usart2ClockSelection = RCC_USART2CLKSOURCE_PCLK1,
+		.I2c1ClockSelection = RCC_I2C1CLKSOURCE_HSI,
+	}) != HAL_OK) return hh_io_setup_error_handler();
+}
+
+void hh_io_spi_setup() {
+	if (HAL_SPI_Init(&hspi1) != HAL_OK)
+		return hh_io_setup_error_handler();
+}
+
+void hh_io_usart2_setup() {
+	if (HAL_UART_Init(&huart2) != HAL_OK)
+		return hh_io_setup_error_handler();
+}
+
+void hh_io_tim_setup() {
+	if (HAL_TIM_Base_Init(&htim3) != HAL_OK)
+		return hh_io_setup_error_handler();
+
+	if (HAL_TIM_ConfigClockSource(&htim3, &(TIM_ClockConfigTypeDef) {
+		.ClockSource = TIM_CLOCKSOURCE_INTERNAL
+	}) != HAL_OK) return hh_io_setup_error_handler();
+
+	if (HAL_TIMEx_MasterConfigSynchronization(&htim3, &(TIM_MasterConfigTypeDef) {
+		.MasterOutputTrigger = TIM_TRGO_RESET,
+		.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE,
+	}) != HAL_OK) return hh_io_setup_error_handler();
+}
+
+void hh_io_gpio_setup() {
+  __HAL_RCC_GPIOA_CLK_ENABLE();
+  __HAL_RCC_GPIOB_CLK_ENABLE();
+
+  HAL_GPIO_WritePin(GPIOA, GPIO_PIN_9, GPIO_PIN_SET);
+	HAL_GPIO_Init(GPIOA, &(GPIO_InitTypeDef) {
+		.Pin = GPIO_PIN_9,
+		.Mode = GPIO_MODE_OUTPUT_PP,
+		.Pull = GPIO_NOPULL,
+		.Speed = GPIO_SPEED_FREQ_LOW,
+	});
+	HAL_GPIO_Init(GPIOA, &(GPIO_InitTypeDef) {
+		.Pin = GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_8,
+		.Mode = GPIO_MODE_INPUT,
+		.Pull = GPIO_PULLDOWN,
+	});
+}
+
+void HAL_MspInit() {
+  __HAL_RCC_SYSCFG_CLK_ENABLE();
+  __HAL_RCC_PWR_CLK_ENABLE();
+}
+
+void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi) {
+  if(hspi->Instance != SPI1) return;
+
+	__HAL_RCC_SPI1_CLK_ENABLE();
+	__HAL_RCC_GPIOA_CLK_ENABLE();
+
+	HAL_GPIO_Init(HH_IO_SPI_PORT, &spi_gpio);
+}
+
+void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi) {
+  if(hspi->Instance != SPI1) return;
+
+	__HAL_RCC_SPI1_CLK_DISABLE();
+
+	HAL_GPIO_DeInit(HH_IO_SPI_PORT, HH_IO_SPI_PINS);
+}
+
+void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base) {
+  if(htim_base->Instance != TIM3) return;
+
+	__HAL_RCC_TIM3_CLK_ENABLE();
+}
+
+void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base) {
+  if(htim_base->Instance != TIM3) return;
+
+	__HAL_RCC_TIM3_CLK_DISABLE();
+}
+
+void SysTick_Handler() {
+	HAL_IncTick();
+	if (xTaskGetSchedulerState() != taskSCHEDULER_NOT_STARTED)
+		xPortSysTickHandler();
+}
+
+void HardFault_Handler() {
+	for(;;);
+}
+
+void hh_io_setup_error_handler() {
+	__disable_irq();
+	while (1);
+}