Merge branch 'lonkaars:dev' into game-engine

5 files changed, 163 insertions, 116 deletions

diff --git a/basys3/basys3.srcs/io.xdc b/basys3/basys3.srcs/io.xdc
index f254cdd..fa1dbd0 100644
--- a/basys3/basys3.srcs/io.xdc
+++ b/basys3/basys3.srcs/io.xdc
@@ -1,6 +1,6 @@
-set_property PACKAGE_PIN A15 [get_ports clkSPI]

-set_property PACKAGE_PIN C15 [get_ports csSPI]

-set_property PACKAGE_PIN A17 [get_ports dataSPI]

-set_property IOSTANDARD LVCMOS33 [get_ports dataSPI]

-set_property IOSTANDARD LVCMOS33 [get_ports csSPI]

-set_property IOSTANDARD LVCMOS33 [get_ports clkSPI]
\ No newline at end of file
+set_property PACKAGE_PIN A15 [get_ports SPI_CLK]
+set_property PACKAGE_PIN C15 [get_ports SPI_CS]
+set_property PACKAGE_PIN A17 [get_ports SPI_MOSI]
+set_property IOSTANDARD LVCMOS33 [get_ports SPI_MOSI]
+set_property IOSTANDARD LVCMOS33 [get_ports SPI_CS]
+set_property IOSTANDARD LVCMOS33 [get_ports SPI_CLK]
diff --git a/basys3/basys3.srcs/ppu.vhd b/basys3/basys3.srcs/ppu.vhd
index 9cf1bc0..d6407df 100644
--- a/basys3/basys3.srcs/ppu.vhd
+++ b/basys3/basys3.srcs/ppu.vhd
@@ -14,7 +14,7 @@ entity ppu is port(
 	DATA : in std_logic_vector(PPU_RAM_BUS_DATA_WIDTH-1 downto 0);
 	R,G,B : out std_logic_vector(PPU_COLOR_OUTPUT_DEPTH-1 downto 0);
 	NVSYNC, NHSYNC : out std_logic; -- native VGA out
-	TVSYNC, TVBLANK, THSYNC, THBLANK : out std_logic); -- tiny VGA out
+	TVBLANK, THBLANK : out std_logic); -- tiny VGA out
 end ppu;
 
 architecture Behavioral of ppu is
@@ -189,7 +189,7 @@ architecture Behavioral of ppu is
 	signal BG_SHIFT_X : std_logic_vector(PPU_POS_H_WIDTH-1 downto 0);
 	signal BG_SHIFT_Y : std_logic_vector(PPU_POS_V_WIDTH-1 downto 0);
 	signal FG_FETCH : std_logic;
-	signal TINY_VBLANK, TINY_VSYNC, TINY_HBLANK, TINY_HSYNC,
+	signal TINY_VBLANK, TINY_HBLANK,
 	       NATIVE_VSYNC, NATIVE_HSYNC : std_logic;
 begin
 	SYSCLK <= CLK100;
@@ -205,9 +205,7 @@ begin
 	PAL_AI <= (others => '0');
 
 	TVBLANK <= TINY_VBLANK;
-	TVSYNC <= TINY_VSYNC;
 	THBLANK <= TINY_HBLANK;
-	THSYNC <= TINY_HSYNC;
 	NVSYNC <= NATIVE_VSYNC;
 	NHSYNC <= NATIVE_HSYNC;
 
@@ -334,9 +332,9 @@ begin
 		RESET => SYSRST,
 		X => X,
 		Y => Y,
-		VSYNC => TINY_VSYNC,
+		VSYNC => open,
 		VBLANK => TINY_VBLANK,
-		HSYNC => TINY_HSYNC,
+		HSYNC => open,
 		HBLANK => TINY_HBLANK);
 
 	native_vga_signal_generator : component ppu_vga_native port map( -- native vga signal generator (upscaler)
diff --git a/basys3/basys3.srcs/spi.vhd b/basys3/basys3.srcs/spi.vhd
new file mode 100644
index 0000000..cdf7d4a
--- /dev/null
+++ b/basys3/basys3.srcs/spi.vhd
@@ -0,0 +1,71 @@
+library ieee;
+use ieee.std_logic_1164.all;
+use ieee.numeric_std.all;
+use ieee.std_logic_unsigned.all;
+use work.ppu_consts.all;
+
+entity spi is port (
+	SYSCLK : in std_logic; -- clock basys3 100MHz
+	SPI_CLK : in std_logic; -- incoming clock of SPI 
+	SPI_MOSI : in std_logic; -- incoming data of SPI
+	SPI_CS : in std_logic;   -- incoming select of SPI
+	DATA : out std_logic_vector(PPU_RAM_BUS_ADDR_WIDTH+PPU_RAM_BUS_DATA_WIDTH-1 downto 0)); --  data read
+end spi;
+
+architecture Behavioral of spi is
+	signal PulseFF0,PulseFF1,PulseFF2,PulseFF3 : std_logic := '0';	 -- signal for metastability synchronizer of clk SPI
+	signal dataFF0,dataFF1,dataFF2,dataFF3 : std_logic := '0';		  -- signal for metastability synchronizer of data SPI
+	signal ssFF0,ssFF1,ssFF2,ssFF3 : std_logic := '0';				  -- signal for metastability synchronizer of slave select SPI
+	
+	signal SPI_REG : std_logic_vector(PPU_RAM_BUS_ADDR_WIDTH+PPU_RAM_BUS_DATA_WIDTH-1 downto 0) := (others => '0');	  -- signal to store incomming data of dataSPI (2x 8bit)
+	signal counter : integer := 23;									  -- counter for data position
+	signal enable : std_logic := '0';								   -- enable signal if slave is selected
+begin
+	
+	process (SYSCLK)
+	begin
+		if rising_edge(SYSCLK) then	   
+			-- flip flop for clk SPI to synchronise a
+			PulseFF0 <= SPI_CLK;
+			PulseFF1 <= PulseFF0;
+			PulseFF2 <= PulseFF1;
+			PulseFF3 <= PulseFF2;  
+			-- flip flop for data SPI to synchronise	  
+			dataFF0 <= SPI_MOSI;
+			dataFF1 <= dataFF0;
+			dataFF2 <= dataFF1;
+			dataFF3 <= dataFF2;			 
+			 -- flip flop for slave select SPI to synchronise				  
+			ssFF0 <= SPI_CS;
+			ssFF1 <= ssFF0;
+			ssFF2 <= ssFF1;
+			ssFF3 <= ssFF2; 
+			-- check if slave select signal has falling edge (slave is selected by master)	
+			if(ssFF3 = '1' and ssFF2 = '0') then
+			-- reset counter if true
+				counter <= 23;
+			-- disable data read if rising edge (slave is not selected)	
+			elsif (ssFF3 = '0' and ssFF2 = '1') then
+				enable <= '0';
+			end if;			
+			-- check if synchronised slave select signal is falling edge or data read is enabled
+			if(ssFF3 = '1' and ssFF2 = '0') or enable = '1' then
+				enable <= '1';										  -- enable data read
+				if (PulseFF3 = '0' and PulseFF2 = '1') then			 -- check for rising edge of clk SPI
+					if counter > -1 then								
+						counter <= counter - 1;
+						-- data transfer into vector  
+						SPI_REG(counter) <= dataFF3;
+					end if;
+				end if;
+				-- check if counter is done
+				if counter = -1 then
+					counter <= 23;	   -- reset counter 
+					DATA <= SPI_REG;			 
+				end if;	  
+			elsif (enable = '0') then
+				-- DATA <= SPI_REG;
+			end if;
+		end if;
+	end process;
+end Behavioral;
diff --git a/basys3/basys3.srcs/top.vhd b/basys3/basys3.srcs/top.vhd
index 7cf3e63..558489b 100644
--- a/basys3/basys3.srcs/top.vhd
+++ b/basys3/basys3.srcs/top.vhd
@@ -1,105 +1,63 @@
-----------------------------------------------------------------------------------
--- Company: 
--- Engineer: 
--- 
--- Create Date: 15.02.2023 21:09:16
--- Design Name: 
--- Module Name: top - Behavioral
--- Project Name: 
--- Target Devices: 
--- Tool Versions: 
--- Description: 
--- 
--- Dependencies: 
--- 
--- Revision:
--- Revision 0.01 - File Created
--- Additional Comments:
--- 
-----------------------------------------------------------------------------------
-
-
-library IEEE;
-use IEEE.STD_LOGIC_1164.ALL;
-
--- Uncomment the following library declaration if using
--- arithmetic functions with Signed or Unsigned values
-use IEEE.NUMERIC_STD.ALL;
-use IEEE.STD_LOGIC_UNSIGNED.ALL;
--- Uncomment the following library declaration if instantiating
--- any Xilinx leaf cells in this code.
---library UNISIM;
---use UNISIM.VComponents.all;
-
-entity spiSlave is
-  Port (    clkBoard : in std_logic; -- clock basys3 100MHz
-            clkSPI : in std_logic; -- incoming clock of SPI 
-            dataSPI : in std_logic; -- incoming data of SPI
-            csSPI : in std_logic;   -- incoming select of SPI
-            dataRead : out std_logic_vector(23 downto 0) := (others => '0') --  data read
-
-  );
-end spiSlave;
-
-architecture Behavioral of spiSlave is
-    signal PulseFF0,PulseFF1,PulseFF2,PulseFF3 : std_logic := '0';     -- signal for metastability synchronizer of clk SPI
-    signal dataFF0,dataFF1,dataFF2,dataFF3 : std_logic := '0';          -- signal for metastability synchronizer of data SPI
-    signal ssFF0,ssFF1,ssFF2,ssFF3 : std_logic := '0';                  -- signal for metastability synchronizer of slave select SPI
-    
-    signal data : std_logic_vector(23 downto 0) := (others => '0');      -- signal to store incomming data of dataSPI (2x 8bit)
-    signal counter : integer := 23;                                      --counter for data position
-    signal enable : std_logic := '0';                                   -- enable signal if slave is selected
+library ieee;
+use ieee.std_logic_1164.all;
+use ieee.numeric_std.all;
+use work.ppu_consts.all;
+
+entity top is port (
+	SYSCLK : in std_logic; -- clock basys3 100MHz
+	RESET : in std_logic; -- global (async) system reset
+	SPI_CLK : in std_logic; -- incoming clock of SPI 
+	SPI_MOSI : in std_logic; -- incoming data of SPI
+	SPI_CS : in std_logic;   -- incoming select of SPI
+	WEN : in std_logic; -- PPU VRAM write enable
+	R,G,B : out std_logic_vector(PPU_COLOR_OUTPUT_DEPTH-1 downto 0);
+	NVSYNC, NHSYNC : out std_logic; -- native VGA out
+	TVBLANK, THBLANK : out std_logic); -- tiny VGA out
+end top;
+
+architecture Behavioral of top is
+	component ppu port(
+		CLK100 : in std_logic; -- system clock
+		RESET : in std_logic; -- global (async) system reset
+		EN : in std_logic; -- PPU VRAM enable (enable ADDR and DATA tri-state drivers)
+		WEN : in std_logic; -- PPU VRAM write enable
+		ADDR : in std_logic_vector(PPU_RAM_BUS_ADDR_WIDTH-1 downto 0); -- PPU VRAM ADDR
+		DATA : in std_logic_vector(PPU_RAM_BUS_DATA_WIDTH-1 downto 0);
+		R,G,B : out std_logic_vector(PPU_COLOR_OUTPUT_DEPTH-1 downto 0);
+		NVSYNC, NHSYNC : out std_logic; -- native VGA out
+		TVBLANK, THBLANK : out std_logic); -- tiny VGA out
+	end component;
+	component spi port (
+		SYSCLK : in std_logic; -- clock basys3 100MHz
+		SPI_CLK : in std_logic; -- incoming clock of SPI 
+		SPI_MOSI : in std_logic; -- incoming data of SPI
+		SPI_CS : in std_logic;   -- incoming select of SPI
+		DATA : out std_logic_vector(PPU_RAM_BUS_ADDR_WIDTH+PPU_RAM_BUS_DATA_WIDTH-1 downto 0)); --  data read
+	end component;
+
+	signal SPI_DATA : std_logic_vector(PPU_RAM_BUS_ADDR_WIDTH+PPU_RAM_BUS_DATA_WIDTH-1 downto 0);
+	alias SPI_DATA_ADDR is SPI_DATA(31 downto 16);
+	alias SPI_DATA_DATA is SPI_DATA(15 downto 0);
 begin
-    
-    process (clkBoard)
-    begin
-        
-        if rising_edge(clkBoard) then       
-            -- flip flop for clk SPI to synchronise a
-            PulseFF0 <= clkSPI;
-            PulseFF1 <= PulseFF0;
-            PulseFF2 <= PulseFF1;
-            PulseFF3 <= PulseFF2;  
-            -- flip flop for data SPI to synchronise      
-            dataFF0 <= dataSPI;
-            dataFF1 <= dataFF0;
-            dataFF2 <= dataFF1;
-            dataFF3 <= dataFF2;             
-             -- flip flop for slave select SPI to synchronise                  
-            ssFF0 <= csSPI;
-            ssFF1 <= ssFF0;
-            ssFF2 <= ssFF1;
-            ssFF3 <= ssFF2; 
-            -- check if slave select signal has falling edge (slave is selected by master)    
-            if(ssFF3 = '1' and ssFF2 = '0') then
-            --reset counter if true
-                counter <= 23;
-            --disable data read if rising edge (slave is not selected)    
-            elsif (ssFF3 = '0' and ssFF2 = '1') then
-                enable <= '0';
-            end if;            
-            --check if synchronised slave select signal is falling edge or data read is enabled
-            if(ssFF3 = '1' and ssFF2 = '0') or enable = '1' then
-                enable <= '1';                                          --enable data read
-                if (PulseFF3 = '0' and PulseFF2 = '1') then             -- check for rising edge of clk SPI
-                    if counter > -1 then                                
-                        counter <= counter - 1;
-                        -- data transfer into vector  
-                        data(counter) <= dataFF3;
-                    end if;
-                end if;
-                --check if counter is done
-                if counter = -1 then
-                    counter <= 23;       --reset counter 
-                    dataRead <= data;             
-                end if;      
-            elsif (enable = '0') then
-            --dataRead <= data;
-            
-            end if;
-
-        end if;
-
-    end process;
-
+	serial_peripheral_interface: component spi port map(
+		SYSCLK => SYSCLK,
+		SPI_CLK => SPI_CLK,
+		SPI_MOSI => SPI_MOSI,
+		SPI_CS => '1',
+		DATA => SPI_DATA);
+
+	picture_processing_unit: component ppu port map(
+		CLK100 => SYSCLK,
+		RESET => RESET,
+		EN => '1',
+		WEN => WEN,
+		ADDR => SPI_DATA_ADDR,
+		DATA => SPI_DATA_DATA,
+		R => R,
+		G => G,
+		B => B,
+		NVSYNC => NVSYNC,
+		NHSYNC => NHSYNC,
+		TVBLANK => TVBLANK,
+		THBLANK => THBLANK);
 end Behavioral;
diff --git a/basys3/basys3.xpr b/basys3/basys3.xpr
index 4060a21..b4b83db 100644
--- a/basys3/basys3.xpr
+++ b/basys3/basys3.xpr
@@ -197,14 +197,32 @@
           <Attr Name="UsedIn" Val="simulation"/>
         </FileInfo>
       </File>
+      <File Path="$PSRCDIR/top.vhd">
+        <FileInfo>
+          <Attr Name="UsedIn" Val="synthesis"/>
+          <Attr Name="UsedIn" Val="simulation"/>
+        </FileInfo>
+      </File>
+      <File Path="$PSRCDIR/spi.vhd">
+        <FileInfo>
+          <Attr Name="UsedIn" Val="synthesis"/>
+          <Attr Name="UsedIn" Val="simulation"/>
+        </FileInfo>
+      </File>
       <Config>
         <Option Name="DesignMode" Val="RTL"/>
-        <Option Name="TopModule" Val="ppu"/>
+        <Option Name="TopModule" Val="top"/>
         <Option Name="dataflowViewerSettings" Val="min_width=16"/>
       </Config>
     </FileSet>
     <FileSet Name="constrs_1" Type="Constrs" RelSrcDir="$PSRCDIR/constrs_1" RelGenDir="$PGENDIR/constrs_1">
       <Filter Type="Constrs"/>
+      <File Path="$PSRCDIR/io.xdc">
+        <FileInfo>
+          <Attr Name="UsedIn" Val="synthesis"/>
+          <Attr Name="UsedIn" Val="implementation"/>
+        </FileInfo>
+      </File>
       <Config>
         <Option Name="ConstrsType" Val="XDC"/>
       </Config>
@@ -298,6 +316,7 @@
     <FileSet Name="ppu_bam" Type="BlockSrcs" RelSrcDir="$PSRCDIR/ppu_bam" RelGenDir="$PGENDIR/ppu_bam">
       <File Path="$PSRCDIR/sources_1/ip/ppu_bam/ppu_bam.xci">
         <FileInfo>
+          <Attr Name="UserDisabled" Val="1"/>
           <Attr Name="UsedIn" Val="synthesis"/>
           <Attr Name="UsedIn" Val="implementation"/>
           <Attr Name="UsedIn" Val="simulation"/>
@@ -311,6 +330,7 @@
     <FileSet Name="ppu_tmm" Type="BlockSrcs" RelSrcDir="$PSRCDIR/ppu_tmm" RelGenDir="$PGENDIR/ppu_tmm">
       <File Path="$PSRCDIR/sources_1/ip/ppu_tmm/ppu_tmm.xci">
         <FileInfo>
+          <Attr Name="UserDisabled" Val="1"/>
           <Attr Name="UsedIn" Val="synthesis"/>
           <Attr Name="UsedIn" Val="implementation"/>
           <Attr Name="UsedIn" Val="simulation"/>