Merge branch 'lonkaars:dev' into dev

2 files changed, 111 insertions, 0 deletions

diff --git a/basys3/basys3.srcs/io.xdc b/basys3/basys3.srcs/io.xdc
new file mode 100644
index 0000000..f254cdd
--- /dev/null
+++ b/basys3/basys3.srcs/io.xdc
@@ -0,0 +1,6 @@
+set_property PACKAGE_PIN A15 [get_ports clkSPI]

+set_property PACKAGE_PIN C15 [get_ports csSPI]

+set_property PACKAGE_PIN A17 [get_ports dataSPI]

+set_property IOSTANDARD LVCMOS33 [get_ports dataSPI]

+set_property IOSTANDARD LVCMOS33 [get_ports csSPI]

+set_property IOSTANDARD LVCMOS33 [get_ports clkSPI]
\ No newline at end of file
diff --git a/basys3/basys3.srcs/top.vhd b/basys3/basys3.srcs/top.vhd
new file mode 100644
index 0000000..7cf3e63
--- /dev/null
+++ b/basys3/basys3.srcs/top.vhd
@@ -0,0 +1,105 @@
+----------------------------------------------------------------------------------
+-- Company: 
+-- Engineer: 
+-- 
+-- Create Date: 15.02.2023 21:09:16
+-- Design Name: 
+-- Module Name: top - Behavioral
+-- Project Name: 
+-- Target Devices: 
+-- Tool Versions: 
+-- Description: 
+-- 
+-- Dependencies: 
+-- 
+-- Revision:
+-- Revision 0.01 - File Created
+-- Additional Comments:
+-- 
+----------------------------------------------------------------------------------
+
+
+library IEEE;
+use IEEE.STD_LOGIC_1164.ALL;
+
+-- Uncomment the following library declaration if using
+-- arithmetic functions with Signed or Unsigned values
+use IEEE.NUMERIC_STD.ALL;
+use IEEE.STD_LOGIC_UNSIGNED.ALL;
+-- Uncomment the following library declaration if instantiating
+-- any Xilinx leaf cells in this code.
+--library UNISIM;
+--use UNISIM.VComponents.all;
+
+entity spiSlave is
+  Port (    clkBoard : in std_logic; -- clock basys3 100MHz
+            clkSPI : in std_logic; -- incoming clock of SPI 
+            dataSPI : in std_logic; -- incoming data of SPI
+            csSPI : in std_logic;   -- incoming select of SPI
+            dataRead : out std_logic_vector(23 downto 0) := (others => '0') --  data read
+
+  );
+end spiSlave;
+
+architecture Behavioral of spiSlave is
+    signal PulseFF0,PulseFF1,PulseFF2,PulseFF3 : std_logic := '0';     -- signal for metastability synchronizer of clk SPI
+    signal dataFF0,dataFF1,dataFF2,dataFF3 : std_logic := '0';          -- signal for metastability synchronizer of data SPI
+    signal ssFF0,ssFF1,ssFF2,ssFF3 : std_logic := '0';                  -- signal for metastability synchronizer of slave select SPI
+    
+    signal data : std_logic_vector(23 downto 0) := (others => '0');      -- signal to store incomming data of dataSPI (2x 8bit)
+    signal counter : integer := 23;                                      --counter for data position
+    signal enable : std_logic := '0';                                   -- enable signal if slave is selected
+begin
+    
+    process (clkBoard)
+    begin
+        
+        if rising_edge(clkBoard) then       
+            -- flip flop for clk SPI to synchronise a
+            PulseFF0 <= clkSPI;
+            PulseFF1 <= PulseFF0;
+            PulseFF2 <= PulseFF1;
+            PulseFF3 <= PulseFF2;  
+            -- flip flop for data SPI to synchronise      
+            dataFF0 <= dataSPI;
+            dataFF1 <= dataFF0;
+            dataFF2 <= dataFF1;
+            dataFF3 <= dataFF2;             
+             -- flip flop for slave select SPI to synchronise                  
+            ssFF0 <= csSPI;
+            ssFF1 <= ssFF0;
+            ssFF2 <= ssFF1;
+            ssFF3 <= ssFF2; 
+            -- check if slave select signal has falling edge (slave is selected by master)    
+            if(ssFF3 = '1' and ssFF2 = '0') then
+            --reset counter if true
+                counter <= 23;
+            --disable data read if rising edge (slave is not selected)    
+            elsif (ssFF3 = '0' and ssFF2 = '1') then
+                enable <= '0';
+            end if;            
+            --check if synchronised slave select signal is falling edge or data read is enabled
+            if(ssFF3 = '1' and ssFF2 = '0') or enable = '1' then
+                enable <= '1';                                          --enable data read
+                if (PulseFF3 = '0' and PulseFF2 = '1') then             -- check for rising edge of clk SPI
+                    if counter > -1 then                                
+                        counter <= counter - 1;
+                        -- data transfer into vector  
+                        data(counter) <= dataFF3;
+                    end if;
+                end if;
+                --check if counter is done
+                if counter = -1 then
+                    counter <= 23;       --reset counter 
+                    dataRead <= data;             
+                end if;      
+            elsif (enable = '0') then
+            --dataRead <= data;
+            
+            end if;
+
+        end if;
+
+    end process;
+
+end Behavioral;