Merge branch 'dev' of https://github.com/UnavailableDev/avans-arcade into dev

1 files changed, 71 insertions, 0 deletions

diff --git a/basys3/basys3.srcs/spi.vhd b/basys3/basys3.srcs/spi.vhd
new file mode 100644
index 0000000..cdf7d4a
--- /dev/null
+++ b/basys3/basys3.srcs/spi.vhd
@@ -0,0 +1,71 @@
+library ieee;
+use ieee.std_logic_1164.all;
+use ieee.numeric_std.all;
+use ieee.std_logic_unsigned.all;
+use work.ppu_consts.all;
+
+entity spi is port (
+	SYSCLK : in std_logic; -- clock basys3 100MHz
+	SPI_CLK : in std_logic; -- incoming clock of SPI 
+	SPI_MOSI : in std_logic; -- incoming data of SPI
+	SPI_CS : in std_logic;   -- incoming select of SPI
+	DATA : out std_logic_vector(PPU_RAM_BUS_ADDR_WIDTH+PPU_RAM_BUS_DATA_WIDTH-1 downto 0)); --  data read
+end spi;
+
+architecture Behavioral of spi is
+	signal PulseFF0,PulseFF1,PulseFF2,PulseFF3 : std_logic := '0';	 -- signal for metastability synchronizer of clk SPI
+	signal dataFF0,dataFF1,dataFF2,dataFF3 : std_logic := '0';		  -- signal for metastability synchronizer of data SPI
+	signal ssFF0,ssFF1,ssFF2,ssFF3 : std_logic := '0';				  -- signal for metastability synchronizer of slave select SPI
+	
+	signal SPI_REG : std_logic_vector(PPU_RAM_BUS_ADDR_WIDTH+PPU_RAM_BUS_DATA_WIDTH-1 downto 0) := (others => '0');	  -- signal to store incomming data of dataSPI (2x 8bit)
+	signal counter : integer := 23;									  -- counter for data position
+	signal enable : std_logic := '0';								   -- enable signal if slave is selected
+begin
+	
+	process (SYSCLK)
+	begin
+		if rising_edge(SYSCLK) then	   
+			-- flip flop for clk SPI to synchronise a
+			PulseFF0 <= SPI_CLK;
+			PulseFF1 <= PulseFF0;
+			PulseFF2 <= PulseFF1;
+			PulseFF3 <= PulseFF2;  
+			-- flip flop for data SPI to synchronise	  
+			dataFF0 <= SPI_MOSI;
+			dataFF1 <= dataFF0;
+			dataFF2 <= dataFF1;
+			dataFF3 <= dataFF2;			 
+			 -- flip flop for slave select SPI to synchronise				  
+			ssFF0 <= SPI_CS;
+			ssFF1 <= ssFF0;
+			ssFF2 <= ssFF1;
+			ssFF3 <= ssFF2; 
+			-- check if slave select signal has falling edge (slave is selected by master)	
+			if(ssFF3 = '1' and ssFF2 = '0') then
+			-- reset counter if true
+				counter <= 23;
+			-- disable data read if rising edge (slave is not selected)	
+			elsif (ssFF3 = '0' and ssFF2 = '1') then
+				enable <= '0';
+			end if;			
+			-- check if synchronised slave select signal is falling edge or data read is enabled
+			if(ssFF3 = '1' and ssFF2 = '0') or enable = '1' then
+				enable <= '1';										  -- enable data read
+				if (PulseFF3 = '0' and PulseFF2 = '1') then			 -- check for rising edge of clk SPI
+					if counter > -1 then								
+						counter <= counter - 1;
+						-- data transfer into vector  
+						SPI_REG(counter) <= dataFF3;
+					end if;
+				end if;
+				-- check if counter is done
+				if counter = -1 then
+					counter <= 23;	   -- reset counter 
+					DATA <= SPI_REG;			 
+				end if;	  
+			elsif (enable = '0') then
+				-- DATA <= SPI_REG;
+			end if;
+		end if;
+	end process;
+end Behavioral;