3 files changed, 127 insertions, 0 deletions
diff --git a/src/fsm_stopwatch.vhd b/src/fsm_stopwatch.vhd
new file mode 100644
index 0000000..818bc52
--- /dev/null
+++ b/src/fsm_stopwatch.vhd
@@ -0,0 +1,14 @@
+library ieee;
+use ieee.std_logic_1164.all;
+
+entity FSM_controller is
+	port(
+		clk, sysReset: in std_logic;
+		buttons: in std_logic_vector(1 downto 0);
+		watchRunning, watchReset: out std_logic);
+end FSM_controller;
+
+architecture Behavioral of FSM_controller is
+begin
+end Behavioral;
+
diff --git a/src/main-stopwatch.vhd b/src/main-stopwatch.vhd
new file mode 100644
index 0000000..f8d0ac0
--- /dev/null
+++ b/src/main-stopwatch.vhd
@@ -0,0 +1,101 @@
+library ieee;
+use ieee.std_logic_1164.all;
+use ieee.std_logic_arith.all;
+use ieee.std_logic_unsigned.all;
+
+entity main is
+	port(
+		clk, sysReset: in std_logic;
+		buttons: in std_logic_vector(1 downto 0);
+		DD: out std_logic_vector(7 downto 0);
+		DS: out std_logic_vector(3 downto 0));
+end main;
+
+architecture Behavioral of main is
+	component FSM_controller
+		port(
+			clk, sysReset: in std_logic;
+			buttons: in std_logic_vector(1 downto 0);
+			watchRunning, watchReset: out std_logic);
+	end component;
+	component Watch
+		port(
+			clk, sysReset, watchRunning, watchReset: in std_logic;
+			mins, secs: out std_logic_vector(5 downto 0));
+	end component;
+	component bin2bcd
+		generic(
+			width: integer := 6);
+		port(
+			A: in std_logic_vector(width-1 downto 0); -- binary input (unsigned 8-bit)
+			X: out std_logic_vector(3 downto 0); -- bcd output
+			R: out std_logic_vector(width-1 downto 0)); -- remainder after operation
+	end component;
+	component bcd2disp
+		port(
+			CLK: in std_logic; -- mux clock (switch to next display on rising edge)
+			N0, N1, N2, N3: in std_logic_vector(3 downto 0); -- input bcd digits
+			DD: out std_logic_vector(7 downto 0); -- display segment data
+			DS: out std_logic_vector(3 downto 0)); -- display select
+		-- display 4 bcd digits on display
+	end component;
+	signal watchRunning, watchReset: std_logic;
+	signal mins, secs: std_logic_vector(5 downto 0);
+	signal NC0, NC1: std_logic_vector(5 downto 0); -- carry from bin2bcd8
+	signal N0, N1, N2, N3: std_logic_vector(3 downto 0);
+	signal CLK_T: std_logic_vector(16 downto 0); -- clock counter for display clock
+	-- clock period = (2 << 16) / 100_000_000 = 1.31 ms per display / 5.24 ms full refresh
+begin
+	process(clk)
+	begin
+		if rising_edge(clk) then
+			CLK_T <= (CLK_T + 1);
+		end if;
+	end process;
+
+	controller: component FSM_controller
+		port map(
+			clk => clk,
+			sysReset => sysReset,
+			buttons => buttons,
+			watchRunning => watchRunning,
+			watchReset => watchReset);
+	stopwatch: component Watch
+		port map(
+			clk => clk,
+			sysReset => sysReset,
+			watchRunning => watchRunning,
+			watchReset => watchReset,
+			mins => mins,
+			secs => secs);
+	bcd0: component bin2bcd
+		port map(
+			A => secs,
+			X => N0,
+			R => NC0);
+	bcd1: component bin2bcd
+		port map(
+			A => NC0,
+			X => N1,
+			R => open);
+	bcd2: component bin2bcd
+		port map(
+			A => mins,
+			X => N2,
+			R => NC1);
+	bcd3: component bin2bcd
+		port map(
+			A => NC1,
+			X => N3,
+			R => open);
+	disp: component bcd2disp
+		port map(
+			CLK => CLK_T(16),
+			N0 => N0,
+			N1 => N1,
+			N2 => N2,
+			N3 => N3,
+			DD => DD,
+			DS => DS);
+end Behavioral;
+
diff --git a/src/stopwatch.vhd b/src/stopwatch.vhd
new file mode 100644
index 0000000..cfbd7ff
--- /dev/null
+++ b/src/stopwatch.vhd
@@ -0,0 +1,12 @@
+library ieee;
+use ieee.std_logic_1164.all;
+
+entity Watch is
+	port(
+		clk, sysReset, watchRunning, watchReset: in std_logic;
+		mins, secs: out std_logic_vector(5 downto 0));
+end Watch;
+
+architecture Behavioral of Watch is
+begin
+end Behavioral;